Garage Door Motor Set

Sliding Garage Door Mechanism 2500kg Vds At-plus-2500-kit-5 Vds

The VDS AT-PLUS-2500 sliding gate operator automates sliding garage and driveway gates weighing up to 2,500 kg. The motor is lubricated and cooled in an oil bath and features metal internal gears,...

The VDS AT-PLUS-2500 sliding gate operator automates sliding garage and driveway gates weighing up to 2,500 kg. The motor is lubricated and cooled in an oil bath and features metal internal gears, mechanical limit switches, and key-operated manual release. The built-in control panel includes a receiver for the remote controls.

The set includes safety...

See full description See full description
625 00 €
Delivery by Thu, 12 Nov
38,00 €   shipping cost
Sent from Greece
From NextSystems
Greece
20+ pieces
See Garage Door Mechanisms on the page of NextSystems

Learn more about invoicing

Description

Description

The VDS AT-PLUS-2500 sliding gate operator automates sliding garage and driveway gates weighing up to 2,500 kg. The motor is lubricated and cooled in an oil bath and features metal internal gears, mechanical limit switches, and key-operated manual release. The built-in control panel includes a receiver for the remote controls.

The set includes safety photocells with a wired transmitter and receiver, an LED flashing light with a built-in antenna, and a metal rack with spacers and screws. For a 5 m gate at 20°C, it supports up to 50 opening and closing cycles per hour.

  • Motor type: Sliding garage gate
  • Maximum gate weight: 2,500 kg
  • Maximum gate length: 4 m
  • Motor power: 650 W
  • Operating voltage: 230 VAC, single-phase
  • Mechanism: Oil-lubricated and cooled, non-reversible
  • Internal gears: Metal
  • Operating frequency: S3-90% at 20°C
  • Opening and closing cycles per hour: Up to 50 for a 5 m gate at 20°C
  • Maximum gate leaf speed: 9.6 m/min
  • Winding thermal protection: 140°C
  • Gear type: Z16 / m4 (16 teeth / module 4)
  • Limit switches: Mechanical, with microswitches and spring
  • Release mechanism: Key-operated
  • Operating temperature range: -20°C to +55°C
  • Protection rating: IP-44
  • Motor weight: 20 kg
  • Motor dimensions: 290 × 150 × 335 mm
  • Control panel: 1 pc., built-in with receiver
  • Remote controls: 5 pcs., 4 buttons
  • Safety photocells: 1 set, wired transmitter and receiver
  • Flashing light: 1 pc., LED with built-in antenna
  • Rack: 4 m, metal, module 4, with spacers and screws
  • Release keys: 2 pcs.
  • Mounting screws: 4 galvanized
  • Washers: 4 galvanized
  • Mounting bracket: 1 metal
  • Limit switch plates: 2 metal
  • Side covers: 2 pcs.
  • Capacitor: 25 μF
  • User manual: 1 pc.

Manufacturer

See full description

Specifications

Specifications

Specifications

Motor type
Sliding
Maximum Weight
2500 kg
Maximum Door Length
4 m
Built-in Control Panel
Yes
Wi-Fi
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
5 pcs
Security Beacon
1 pcs
External Antenna
1 pcs
Gear Rack
4 m

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The VDS AT-PLUS-2500 sliding gate operator automates sliding garage and driveway gates weighing up to 2,500 kg. The motor is lubricated and cooled in an oil bath and features metal internal gears, mechanical limit switches, and key-operated manual release. The built-in control panel includes a receiver for the remote controls.

The set includes safety photocells with a wired transmitter and receiver, an LED flashing light with a built-in antenna, and a metal rack with spacers and screws. For a 5 m gate at 20°C, it supports up to 50 opening and closing cycles per hour.

  • Motor type: Sliding garage gate
  • Maximum gate weight: 2,500 kg
  • Maximum gate length: 4 m
  • Motor power: 650 W
  • Operating voltage: 230 VAC, single-phase
  • Mechanism: Oil-lubricated and cooled, non-reversible
  • Internal gears: Metal
  • Operating frequency: S3-90% at 20°C
  • Opening and closing cycles per hour: Up to 50 for a 5 m gate at 20°C
  • Maximum gate leaf speed: 9.6 m/min
  • Winding thermal protection: 140°C
  • Gear type: Z16 / m4 (16 teeth / module 4)
  • Limit switches: Mechanical, with microswitches and spring
  • Release mechanism: Key-operated
  • Operating temperature range: -20°C to +55°C
  • Protection rating: IP-44
  • Motor weight: 20 kg
  • Motor dimensions: 290 × 150 × 335 mm
  • Control panel: 1 pc., built-in with receiver
  • Remote controls: 5 pcs., 4 buttons
  • Safety photocells: 1 set, wired transmitter and receiver
  • Flashing light: 1 pc., LED with built-in antenna
  • Rack: 4 m, metal, module 4, with spacers and screws
  • Release keys: 2 pcs.
  • Mounting screws: 4 galvanized
  • Washers: 4 galvanized
  • Mounting bracket: 1 metal
  • Limit switch plates: 2 metal
  • Side covers: 2 pcs.
  • Capacitor: 25 μF
  • User manual: 1 pc.

Manufacturer

Specifications

Motor type
Sliding
Maximum Weight
2500 kg
Maximum Door Length
4 m
Built-in Control Panel
Yes
Wi-Fi
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
5 pcs
Security Beacon
1 pcs
External Antenna
1 pcs
Gear Rack
4 m

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

625,00 €
38,00 €   shipping cost