Skroutz.mt

LS2 Strobe II Monza White Blue Red Motorcycle Helmet Modular ECE 22.06 1700gr with Sun Visor
Motorcycle Helmets

LS2 Strobe II Monza White Blue Red Motorcycle Helmet Modular ECE 22.06 1700gr with Sun Visor Code: 56908 22 02

What makes the LS2 Strobe II stand out

• P/J dual certification: Certified for safe riding with either the chin bar closed or open.

• KPA Material: Shell made of Kinetic Polymer Alloy for greater...

What makes the LS2 Strobe II stand out

• P/J dual certification: Certified for safe riding with either the chin bar closed or open.

• KPA Material: Shell made of Kinetic Polymer Alloy for greater durability and energy absorption.

• ECE 22.06 Certification: Meets the strictest new European safety standards.

• Sun Visor: Built-in internal tinted visor for sun...

See full description See full description

  • Type

    Modular

    Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Ready
  • Color Finish Glossy
  • See all

Size

LS2 size guide
LS2 size guide

Size

LS2 size guide
International
149 00 €
Delivery by Fri, 03 Jul
23,00 €   shipping cost
Sent from Greece
From Ride360
Greece
See Rider Equipment on the page of Ride360
Product report

Description

Description

What makes the LS2 Strobe II stand out

• P/J dual certification: Certified for safe riding with either the chin bar closed or open.

• KPA Material: Shell made of Kinetic Polymer Alloy for greater durability and energy absorption.

• ECE 22.06 Certification: Meets the strictest new European safety standards.

• Sun Visor: Built-in internal tinted visor for sun protection.

Flexibility and safety

From the city to the excursion

The LS2 Strobe II is the evolution of one of the most popular flip-up helmets on the market. Designed for the rider who moves around the city all day but also wants the option to escape, it offers the perfect balance of comfort and safety. 

The shell is now made from KPA (Kinetic Polymer Alloy), a special polymer blend by LS2 that provides flexibility in impact absorption as well as high penetration resistance. 

The most important feature? It has dual P/J certification, which means you can lock the chin bar in the open position (90º) and ride safely, enjoying the breeze.

Visibility Twin Shield

Adapt to every condition

  • Sun Visor: The internal tinted visor lowers easily, functioning like sunglasses for immediate protection from glare.
  • Pinlock Ready: The main scratch-resistant visor has provisions for fitting a Pinlock 70 MaxVision anti-fog insert (sold separately), ensuring a clear field of vision in winter.
  • Quick Release: Quick release system for removing the visor without tools.

Comfort 3D Laser Cut

A fit that embraces

LS2 places great importance on the internal feel.

  • Laser Cut Foam: The pads are cut with 3D Laser technology to perfectly fit the curves of the face.
  • Easy Fit: Special design to comfortably wear prescription glasses without pressure on the temples.
  • Hygiene: The lining is hypoallergenic, antibacterial, fully removable, and washable.
  • Bluetooth Ready: It is ready to accept the new LS2 intercom system (as well as universal systems).

Package contents

  • LS2 Strobe II Helmet
  • Helmet carrying case (fabric hood)
  • Chin strap (attached or in the package)
  • Chin curtain
  • User manual

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
56908 22 02

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Weight (+/-50 gr)
1700 gr

Weight (+/-50 gr): 1700

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.


A helmet weighing over 1450gr is not considered light and is not recommended for long rides.
Colour
White
Color Finish
Glossy
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Ready

Pinlock (Anti-fog Film)

Ready

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Intercom Support
Yes

Intercom Support

The helmet features space for the installation and support of intercom, such as for a speaker, cable, and microphone, so as not to create pressure on the head. 

It is usually very useful for long trips where riders want to have communication during the ride.
Glasses Holder
Yes
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.
Chin Curtain
Yes

Chin Curtain

The helmet has a special fabric at the chin area. It helps to reduce airflow and noise.
Breath Guard
Yes

Breath Guard

It is an additional helmet ventilation accessory that prevents fogging on the visor caused by nose exhalation. It is quite useful during the winter months and in rainy conditions.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (4)

Reviews

5.0
4
5.0
Review this product
  1. 4
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Application
  • Ventilation
  • Construction quality
  • Visibility
  • Value for money
  • High aerodynamic noise
  • Weight

Description & Specifications

What makes the LS2 Strobe II stand out

• P/J dual certification: Certified for safe riding with either the chin bar closed or open.

• KPA Material: Shell made of Kinetic Polymer Alloy for greater durability and energy absorption.

• ECE 22.06 Certification: Meets the strictest new European safety standards.

• Sun Visor: Built-in internal tinted visor for sun protection.

Flexibility and safety

From the city to the excursion

The LS2 Strobe II is the evolution of one of the most popular flip-up helmets on the market. Designed for the rider who moves around the city all day but also wants the option to escape, it offers the perfect balance of comfort and safety. 

The shell is now made from KPA (Kinetic Polymer Alloy), a special polymer blend by LS2 that provides flexibility in impact absorption as well as high penetration resistance. 

The most important feature? It has dual P/J certification, which means you can lock the chin bar in the open position (90º) and ride safely, enjoying the breeze.

Visibility Twin Shield

Adapt to every condition

  • Sun Visor: The internal tinted visor lowers easily, functioning like sunglasses for immediate protection from glare.
  • Pinlock Ready: The main scratch-resistant visor has provisions for fitting a Pinlock 70 MaxVision anti-fog insert (sold separately), ensuring a clear field of vision in winter.
  • Quick Release: Quick release system for removing the visor without tools.

Comfort 3D Laser Cut

A fit that embraces

LS2 places great importance on the internal feel.

  • Laser Cut Foam: The pads are cut with 3D Laser technology to perfectly fit the curves of the face.
  • Easy Fit: Special design to comfortably wear prescription glasses without pressure on the temples.
  • Hygiene: The lining is hypoallergenic, antibacterial, fully removable, and washable.
  • Bluetooth Ready: It is ready to accept the new LS2 intercom system (as well as universal systems).

Package contents

  • LS2 Strobe II Helmet
  • Helmet carrying case (fabric hood)
  • Chin strap (attached or in the package)
  • Chin curtain
  • User manual

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
56908 22 02

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Weight (+/-50 gr)
1700 gr

Weight (+/-50 gr): 1700

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.


A helmet weighing over 1450gr is not considered light and is not recommended for long rides.
Colour
White
Color Finish
Glossy
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Ready

Pinlock (Anti-fog Film)

Ready

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Intercom Support
Yes

Intercom Support

The helmet features space for the installation and support of intercom, such as for a speaker, cable, and microphone, so as not to create pressure on the head. 

It is usually very useful for long trips where riders want to have communication during the ride.
Glasses Holder
Yes
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.
Chin Curtain
Yes

Chin Curtain

The helmet has a special fabric at the chin area. It helps to reduce airflow and noise.
Breath Guard
Yes

Breath Guard

It is an additional helmet ventilation accessory that prevents fogging on the visor caused by nose exhalation. It is quite useful during the winter months and in rainy conditions.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (4)

5.0
4
5.0
Review this product
  1. 4
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Application
  • Ventilation
  • Construction quality
  • Visibility
  • Value for money
  • High aerodynamic noise
  • Weight
149,00 €
23,00 €   shipping cost