Skroutz.mt

Caberg Ghost-X Motorcycle Helmet Modular ECE 22.06 1050gr
Motorcycle Helmets

Caberg Ghost-X Motorcycle Helmet Modular ECE 22.06 1050gr Code: CAB000KRA605

Jet helmet, equipped with a goggle-type visor that fits the face thanks to the foam section along the inner lower side of the visor, as well as a mask for face protection.

Features:

  • Opens and closes...

Jet helmet, equipped with a goggle-type visor that fits the face thanks to the foam section along the inner lower side of the visor, as well as a mask for face protection.

Features:

  • Opens and closes with one hand thanks to a spring system.
  • Can be used in 4 different configurations:
    • With visor, foam profile, and mask.
    • With visor and mask, without foam...
See full description See full description

  • Type

    Modular

    Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.

  • Material

    Carbon

    This is a high-tech material used in top-performance helmets.

    Carbon Fiber offers exceptional impact resistance, extremely low weight, and high torsional rigidity, making it ideal for racing use.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all

Size

Caberg size guide
Caberg size guide

Size

Caberg size guide
International
Review the product
Product report

Description

Description

Jet helmet, equipped with a goggle-type visor that fits the face thanks to the foam section along the inner lower side of the visor, as well as a mask for face protection.

Features:

  • Opens and closes with one hand thanks to a spring system.
  • Can be used in 4 different configurations:
    • With visor, foam profile, and mask.
    • With visor and mask, without foam profile.
    • With visor and foam profile, without mask.
    • Only with visor, without foam profile and mask.
  • Shell made of composite material (fiber, carbon, and kevlar).
  • Also available in a full carbon version with a carbon fiber shell.
  • Pinlock included.
  • Breathable, removable, and washable inner lining.
  • Equipped with the CABERG PRO SPEAK EVO intercom system.

Outer shell: Full Carbon. Lining: Breathable fabric with leather details, removable and washable. Visor: Transparent with anti-scratch treatment. Closure: Micrometric buckle. Specifications: ECE 22.06. Weight: 1,050 +/- 50gr.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
CAB000KRA605

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Weight (+/-50 gr)
1050 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Material
Carbon

Material

Carbon

This is a high-tech material used in top-performance helmets.

Carbon Fiber offers exceptional impact resistance, extremely low weight, and high torsional rigidity, making it ideal for racing use.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Jet helmet, equipped with a goggle-type visor that fits the face thanks to the foam section along the inner lower side of the visor, as well as a mask for face protection.

Features:

  • Opens and closes with one hand thanks to a spring system.
  • Can be used in 4 different configurations:
    • With visor, foam profile, and mask.
    • With visor and mask, without foam profile.
    • With visor and foam profile, without mask.
    • Only with visor, without foam profile and mask.
  • Shell made of composite material (fiber, carbon, and kevlar).
  • Also available in a full carbon version with a carbon fiber shell.
  • Pinlock included.
  • Breathable, removable, and washable inner lining.
  • Equipped with the CABERG PRO SPEAK EVO intercom system.

Outer shell: Full Carbon. Lining: Breathable fabric with leather details, removable and washable. Visor: Transparent with anti-scratch treatment. Closure: Micrometric buckle. Specifications: ECE 22.06. Weight: 1,050 +/- 50gr.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
CAB000KRA605

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Weight (+/-50 gr)
1050 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Material
Carbon

Material

Carbon

This is a high-tech material used in top-performance helmets.

Carbon Fiber offers exceptional impact resistance, extremely low weight, and high torsional rigidity, making it ideal for racing use.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

329,99 €
17,00 €   shipping cost