Skroutz.mt

Berdsen BE-10A Freestanding Vent Hood 50cm Black
Vent Hoods

Berdsen BE-10A Freestanding Vent Hood 50cm Black Code: DAC-NOP-100014816

The Berdsen BE-10-A kitchen hood is an under-cabinet model, combining high quality and elegance. Made of black stainless steel, it fits perfectly in small yet modern spaces.

Main features:

  • Hood for...

The Berdsen BE-10-A kitchen hood is an under-cabinet model, combining high quality and elegance. Made of black stainless steel, it fits perfectly in small yet modern spaces.

Main features:

  • Hood for installation under a cabinet
  • Option to mount on a cabinet or directly on the wall
  • Fits perfectly in modern and classic kitchens
  • Universal black finish
  • Glass...
See full description See full description

  • Item

    Standard

    "It is of classic type and cannot be built-in."

  • Noise Level

    Shows how much noise the extractor makes when it is in operation.

    2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

  • Energy class

    The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

    2. The higher the energy class, the lower the electricity consumption.

    3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.

  • Extraction Power (Max)

    Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


    For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

  • Filter Type

    Metal

    They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.

    Charcoal (optional)

    Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


    They are not washable and it is recommended to replace them every 4 months.


    Their use reduces the efficiency of the range hood by about 30%.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The Berdsen BE-10-A kitchen hood is an under-cabinet model, combining high quality and elegance. Made of black stainless steel, it fits perfectly in small yet modern spaces.

Main features:

  • Hood for installation under a cabinet
  • Option to mount on a cabinet or directly on the wall
  • Fits perfectly in modern and classic kitchens
  • Universal black finish
  • Glass surface that highlights the character of the hood
  • Efficient LED lighting
  • Mechanical control - front buttons
  • 5-layer aluminum grease filter

Technical specifications:

  • Width: 49.8 cm
  • Height: 14 cm
  • Depth: 50 cm
  • Control: mechanical (button)
  • Speed range: 3 speeds
  • Maximum performance: 205 m³/h
  • Maximum motor power: 39 W
  • Average sound pressure: 61 dB
  • Function: hood or extractor
  • Lighting: LED (1 x 2 W)
  • Grease filter: reinforced aluminum with 5 layers
  • Type of carbon filter: Berdsen TYP-A 1 pc. (not included)
  • Finish: stainless steel
  • Color/design: black/stainless steel
  • Outlet diameter: Ø 12 cm
  • Weight: 5.2 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
DAC-NOP-100014816

Product Details

Type
Standard

Type

Standard

"It is of classic type and cannot be built-in."
Retro
No
Grease Filter Material
Metal, Charcoal (optional)

Grease Filter Material

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.

Charcoal (optional)

Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


They are not washable and it is recommended to replace them every 4 months.


Their use reduces the efficiency of the range hood by about 30%.
Extraction Mode
Extraction or Recirculation

Extraction Mode

Concerns the way in which the extractor absorbs air.

Extraction or Recirculation

The extractor fan has both functions. The air that the extractor fan draws can either be extracted through a pipe or recycled back into the fan. For air extraction function, a pipe is needed to remove the air outside the kitchen.
Dual Motor
No
Type of Control
Switches
Timer Function
No
Filter Cleaning Indicator
No
Washable Filter
-
Colour
Black

Technical Features

Extraction Power (Max)
205 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

Dimensions

Width
50 cm
Length
-

Energy Label

Energy Class
B

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
26 kWh/y
Extraction Flow Efficiency
E

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
A

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
E

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
61 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Berdsen BE-10-A kitchen hood is an under-cabinet model, combining high quality and elegance. Made of black stainless steel, it fits perfectly in small yet modern spaces.

Main features:

  • Hood for installation under a cabinet
  • Option to mount on a cabinet or directly on the wall
  • Fits perfectly in modern and classic kitchens
  • Universal black finish
  • Glass surface that highlights the character of the hood
  • Efficient LED lighting
  • Mechanical control - front buttons
  • 5-layer aluminum grease filter

Technical specifications:

  • Width: 49.8 cm
  • Height: 14 cm
  • Depth: 50 cm
  • Control: mechanical (button)
  • Speed range: 3 speeds
  • Maximum performance: 205 m³/h
  • Maximum motor power: 39 W
  • Average sound pressure: 61 dB
  • Function: hood or extractor
  • Lighting: LED (1 x 2 W)
  • Grease filter: reinforced aluminum with 5 layers
  • Type of carbon filter: Berdsen TYP-A 1 pc. (not included)
  • Finish: stainless steel
  • Color/design: black/stainless steel
  • Outlet diameter: Ø 12 cm
  • Weight: 5.2 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
DAC-NOP-100014816

Product Details

Type
Standard

Type

Standard

"It is of classic type and cannot be built-in."
Retro
No
Grease Filter Material
Metal, Charcoal (optional)

Grease Filter Material

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.

Charcoal (optional)

Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


They are not washable and it is recommended to replace them every 4 months.


Their use reduces the efficiency of the range hood by about 30%.
Extraction Mode
Extraction or Recirculation

Extraction Mode

Concerns the way in which the extractor absorbs air.

Extraction or Recirculation

The extractor fan has both functions. The air that the extractor fan draws can either be extracted through a pipe or recycled back into the fan. For air extraction function, a pipe is needed to remove the air outside the kitchen.
Dual Motor
No
Type of Control
Switches
Timer Function
No
Filter Cleaning Indicator
No
Washable Filter
-
Colour
Black

Technical Features

Extraction Power (Max)
205 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

Dimensions

Width
50 cm
Length
-

Energy Label

Energy Class
B

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
26 kWh/y
Extraction Flow Efficiency
E

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
A

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
E

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
61 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.