Skroutz.mt

Doorado Sliding Garage Door Motor Set Slg600-kit142 1 Remote Control 4 Meters Rack Photocells Reflector
Garage Door Motor Set

Doorado Sliding Garage Door Motor Set Slg600-kit142 1 Remote Control 4 Meters Rack Photocells Reflector

Sliding garage door motor set SLG600-kit142 consisting of:

  • SLG600 motor 1 piece
  • Motor support base 1 piece
  • Manual operation keys 2 pieces
  • Terminal switch connectors 2 pieces
  • Integrated control panel...

Sliding garage door motor set SLG600-kit142 consisting of:

  • SLG600 motor 1 piece
  • Motor support base 1 piece
  • Manual operation keys 2 pieces
  • Terminal switch connectors 2 pieces
  • Integrated control panel 1 piece
  • Remote control 1 piece
  • Galvanized rack 4 meters
  • Photoelectric sensors with reflector 1 piece
  • Greek instructions

Technical specifications of the...

See full description See full description
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Sliding garage door motor set SLG600-kit142 consisting of:

  • SLG600 motor 1 piece
  • Motor support base 1 piece
  • Manual operation keys 2 pieces
  • Terminal switch connectors 2 pieces
  • Integrated control panel 1 piece
  • Remote control 1 piece
  • Galvanized rack 4 meters
  • Photoelectric sensors with reflector 1 piece
  • Greek instructions

Technical specifications of the mechanism:

  • Suitable for sliding garage doors up to 600 kg
  • Dimensions of the mechanism 271x228x290 mm (WxHxD)
  • Single-phase motor 220 V with a power of 280 W
  • With slow speed for smooth starting and stopping
  • Mechanism with metal gears in permanent lubrication
  • Leaf movement speed 12 m/min
  • Up to 12 openings and closings per hour
  • Non-reversible (meaning it has a brake at every position)
  • Operating temperature from -20 °C to 70 °C
  • Has thermal overload protection for the motor
  • In case of power outage, there is a key for manual operation
  • Has a command for connecting an external button
  • Capability to connect a safety photoelectric sensor
  • Features electronic adjustment of motor power
  • Maximum thrust power of the motor 200N
  • Supports a flashing light while the door is in operation
  • Features automatic closing
  • Protection rating IP44
  • Gear type Z17/m4 (17 teeth / module 4)

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Motor type
Sliding

Motor type

Sliding
Suitable for residential and commercial entrances, when there is available space for opening, as wide as the entrance width.
Maximum Weight
600 kg

Maximum Weight

Describes the maximum weight of the garage door that is suitable for the motor.
Maximum Door Length
4 m

Maximum Door Length

Indicates the maximum door length or width that the motor can safely operate.
Built-in Control Panel
Yes
Wi-Fi
No

Wi-Fi

Allows remote control and monitoring of the motor via a smartphone app, by connecting it to the home Wi-Fi network.

Set Contents

Motor
1 pcs
Control Panel
1 pcs

Control Panel

1

It regulates and manages the operation of the motor, the commands from the remote controls, and the safety accessories.
Remote Control
1 pcs
Security Beacon
1 pcs

Security Beacon

During motor operation, it flashes indicating that the door is moving. It is used as a safety accessory and where there is low visibility when exiting the vehicle.
Photocells
2 pcs

Photocells

They are used for safe use of the garage door by automatically stopping the motor's movement in case they detect an obstacle.
External Antenna
1 pcs

External Antenna

It enhances the signal range, allowing the use of remote controls from a greater distance. It is usually installed outside of metal shutters, as the metal surface obstructs the signal from going out.
Gear Rack
4 m

Gear Rack

This is a rod with teeth that is used in sliding automations. In combination with the motor gear, it ensures the movement of the garage door (opening and closing).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Sliding garage door motor set SLG600-kit142 consisting of:

  • SLG600 motor 1 piece
  • Motor support base 1 piece
  • Manual operation keys 2 pieces
  • Terminal switch connectors 2 pieces
  • Integrated control panel 1 piece
  • Remote control 1 piece
  • Galvanized rack 4 meters
  • Photoelectric sensors with reflector 1 piece
  • Greek instructions

Technical specifications of the mechanism:

  • Suitable for sliding garage doors up to 600 kg
  • Dimensions of the mechanism 271x228x290 mm (WxHxD)
  • Single-phase motor 220 V with a power of 280 W
  • With slow speed for smooth starting and stopping
  • Mechanism with metal gears in permanent lubrication
  • Leaf movement speed 12 m/min
  • Up to 12 openings and closings per hour
  • Non-reversible (meaning it has a brake at every position)
  • Operating temperature from -20 °C to 70 °C
  • Has thermal overload protection for the motor
  • In case of power outage, there is a key for manual operation
  • Has a command for connecting an external button
  • Capability to connect a safety photoelectric sensor
  • Features electronic adjustment of motor power
  • Maximum thrust power of the motor 200N
  • Supports a flashing light while the door is in operation
  • Features automatic closing
  • Protection rating IP44
  • Gear type Z17/m4 (17 teeth / module 4)

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Motor type
Sliding

Motor type

Sliding
Suitable for residential and commercial entrances, when there is available space for opening, as wide as the entrance width.
Maximum Weight
600 kg

Maximum Weight

Describes the maximum weight of the garage door that is suitable for the motor.
Maximum Door Length
4 m

Maximum Door Length

Indicates the maximum door length or width that the motor can safely operate.
Built-in Control Panel
Yes
Wi-Fi
No

Wi-Fi

Allows remote control and monitoring of the motor via a smartphone app, by connecting it to the home Wi-Fi network.

Set Contents

Motor
1 pcs
Control Panel
1 pcs

Control Panel

1

It regulates and manages the operation of the motor, the commands from the remote controls, and the safety accessories.
Remote Control
1 pcs
Security Beacon
1 pcs

Security Beacon

During motor operation, it flashes indicating that the door is moving. It is used as a safety accessory and where there is low visibility when exiting the vehicle.
Photocells
2 pcs

Photocells

They are used for safe use of the garage door by automatically stopping the motor's movement in case they detect an obstacle.
External Antenna
1 pcs

External Antenna

It enhances the signal range, allowing the use of remote controls from a greater distance. It is usually installed outside of metal shutters, as the metal surface obstructs the signal from going out.
Gear Rack
4 m

Gear Rack

This is a rod with teeth that is used in sliding automations. In combination with the motor gear, it ensures the movement of the garage door (opening and closing).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.