Skroutz.mt

Bormann Pro BIW4050 Welding Machine Inverter MIG / TIG / MMA with Maximum Welding Current 200A and Duty Cycle 60%
Welding Machines

Bormann Pro BIW4050 Welding Machine Inverter MIG / TIG / MMA with Maximum Welding Current 200A and Duty Cycle 60%

Key features:

  • Voltage: 230V/50Hz
  • Nominal Power: 7kVA
  • Plasma Current: 20-40A
  • Efficiency: 60%
  • Electrode: 1.6-5mm
  • Weight: 15kg
See full description

  • Welding Current

    200

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power

    7

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
424 15 €
Delivery by Fri, 07 Aug
17,00 €   shipping cost
Sent from Greece
From Homelier 4.5 (68)
4.5 (68 reviews)
Greece
20 pieces
See Tools on the page of Homelier
Product report

Description

Description

• Voltage: 230V/50Hz

• Rated input capacity: 7KVA

• Welding current: MIG: 40-200A, TIG: 15-200A, MMA: 20-200A, CUT: 20-40A

• Duty cycle: 60%

• Digital display

• Wire diameter: GAS 0.6-1.0mm / NO GAS: 0.8-1.0mm, MIG wire maximum 5kg, Wire type Co2 and Flux

• Maximum plasma cutting: 4-12mm

• Weight: 15kg

• Hot Start / Arc Force / Anti-Stick

• Includes electrode & grounding clamp. TIG TORCH NOT INCLUDED.

Capabilities

Inverter welding MMA / MIG / TIG from the manufacturer Bormann, where inverter technology enhances the performance and durability of the machine and helps reduce its weight. The MMA electrode method creates thick and strong welds without the need for an external gas supply, making it ideal for welding outside the workshop. 

Comfort & Functionality

The MIG method requires the wire to have a special coating (flux) or else it needs to be connected to an external gas cylinder (e.g., argon, CO2). Meanwhile, the TIG method is suitable for slow welding on aluminum and stainless steel that requires detailed work and does not create splatter. It can operate continuously for 6 minutes at 200A before needing to stop to cool down. Therefore, due to the maximum Amps it supports, it melts thicker wires more easily and creates thick welds with fewer passes. Its weight reaches 5kg.

Technical Specifications:

  • MIG Current: 40-200A
  • TIG Current: 15-200A
  • MMA Current: 20-200A
  • Plasma Current: 20-40A
  • Voltage: 230V/50Hz
  • Rated Power: 7kVA
  • Efficiency: 60%
  • Electrode: 1.6-5mm
  • GAS Wire Thickness: 0.6-1.0mm
  • NO GAS Wire Thickness: 0.8-1.0mm
  • Maximum MIG Spool Weight: 5kg
  • Wire Type: Co2/Flux
  • Plasma Cutting Thickness: 4-12mm
  • Weight: 15kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MIG, TIG, MMA

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Power
7 kVA

Power: 7


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
5 mm

Maximum Electrode Diameter: 5


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
5000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

• Voltage: 230V/50Hz

• Rated input capacity: 7KVA

• Welding current: MIG: 40-200A, TIG: 15-200A, MMA: 20-200A, CUT: 20-40A

• Duty cycle: 60%

• Digital display

• Wire diameter: GAS 0.6-1.0mm / NO GAS: 0.8-1.0mm, MIG wire maximum 5kg, Wire type Co2 and Flux

• Maximum plasma cutting: 4-12mm

• Weight: 15kg

• Hot Start / Arc Force / Anti-Stick

• Includes electrode & grounding clamp. TIG TORCH NOT INCLUDED.

Capabilities

Inverter welding MMA / MIG / TIG from the manufacturer Bormann, where inverter technology enhances the performance and durability of the machine and helps reduce its weight. The MMA electrode method creates thick and strong welds without the need for an external gas supply, making it ideal for welding outside the workshop. 

Comfort & Functionality

The MIG method requires the wire to have a special coating (flux) or else it needs to be connected to an external gas cylinder (e.g., argon, CO2). Meanwhile, the TIG method is suitable for slow welding on aluminum and stainless steel that requires detailed work and does not create splatter. It can operate continuously for 6 minutes at 200A before needing to stop to cool down. Therefore, due to the maximum Amps it supports, it melts thicker wires more easily and creates thick welds with fewer passes. Its weight reaches 5kg.

Technical Specifications:

  • MIG Current: 40-200A
  • TIG Current: 15-200A
  • MMA Current: 20-200A
  • Plasma Current: 20-40A
  • Voltage: 230V/50Hz
  • Rated Power: 7kVA
  • Efficiency: 60%
  • Electrode: 1.6-5mm
  • GAS Wire Thickness: 0.6-1.0mm
  • NO GAS Wire Thickness: 0.8-1.0mm
  • Maximum MIG Spool Weight: 5kg
  • Wire Type: Co2/Flux
  • Plasma Cutting Thickness: 4-12mm
  • Weight: 15kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MIG, TIG, MMA

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Power
7 kVA

Power: 7


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
5 mm

Maximum Electrode Diameter: 5


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
5000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
424,15 €
17,00 €   shipping cost