Skroutz.mt

Optex BX-100PLUS Wired Double Beam Detector IP54 10.5-28V Scope 30m
Beam Sensors

Optex BX-100PLUS Wired Double Beam Detector IP54 10.5-28V Scope 30m

  • Range: 30m (outdoor) / 60m (indoor)
  • Beam type: Double (2 synchronized beams)
  • Frequency selection: No
  • Blocking calibration: Optical and acoustic
  • Alignment angle: 92° horizontal
  • Beam interruption time: 50ms
  • Range: 30m (outdoor) / 60m (indoor)
  • Beam type: Double (2 synchronized beams)
  • Frequency selection: No
  • Blocking calibration: Optical and acoustic
  • Alignment angle: 92° horizontal
  • Beam interruption time: 50ms
  • Outputs: NC alarm output / NC Tamper output
See full description See full description

  • Login

    Wired

    It connects to the installation system with a cable and is powered through it.

  • Number of Beams

    The number of beams indicates the quantity of infrared rays connecting the transmitter to the receiver. More beams mean greater coverage height and fewer false alarms, as all beams must be interrupted simultaneously to trigger the system.

  • Range

    The range indicates the maximum distance (in meters) that the transmitter can be from the receiver in order to operate reliably.

  • Length

    Usually, the greater the length, the more beams there are in the device, and therefore the greater the coverage length of the detector.

  • Operating Voltage

    It refers to wired beam detectors and indicates how much voltage (in Volts) the detector needs to operate.

  • Protection Certification

    IP54

    Suitable for indoor or outdoor areas with limited dust. Provides protection against the ingress of objects and withstands light rain or water splashes.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

  • Range: 30m (outdoor) / 60m (indoor)
  • Beam type: Double (2 synchronized beams)
  • Frequency selection: No
  • Blocking calibration: Optical and acoustic
  • Alignment angle: ±92° horizontal
  • Beam interruption time: 50ms
  • Outputs: NC alarm output / NC Tamper output
  • Power supply voltage: 10.5-28V DC
  • Protection: IP54
  • Operating temperature: -35°C to +55°C
  • Dimensions: 230.5mm x 61mm x 51.5mm
  • Weight: 0.40Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Connector
Wired

Connector

Wired
It connects to the installation system with a cable and is powered through it.
Scope
30 m

Scope

The range indicates the maximum distance (in meters) that the transmitter can be from the receiver in order to operate reliably.
Number of Beams
2 Bundles

Number of Beams

The number of beams indicates the quantity of infrared rays connecting the transmitter to the receiver. More beams mean greater coverage height and fewer false alarms, as all beams must be interrupted simultaneously to trigger the system.
Operating Voltage
10.5-28V

Operating Voltage

It refers to wired beam detectors and indicates how much voltage (in Volts) the detector needs to operate.
Protection Certification
IP54

Protection Certification

IP54
Suitable for indoor or outdoor areas with limited dust. Provides protection against the ingress of objects and withstands light rain or water splashes.
Length
23 cm

Length

Usually, the greater the length, the more beams there are in the device, and therefore the greater the coverage length of the detector.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

  • Range: 30m (outdoor) / 60m (indoor)
  • Beam type: Double (2 synchronized beams)
  • Frequency selection: No
  • Blocking calibration: Optical and acoustic
  • Alignment angle: ±92° horizontal
  • Beam interruption time: 50ms
  • Outputs: NC alarm output / NC Tamper output
  • Power supply voltage: 10.5-28V DC
  • Protection: IP54
  • Operating temperature: -35°C to +55°C
  • Dimensions: 230.5mm x 61mm x 51.5mm
  • Weight: 0.40Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
Connector
Wired

Connector

Wired
It connects to the installation system with a cable and is powered through it.
Scope
30 m

Scope

The range indicates the maximum distance (in meters) that the transmitter can be from the receiver in order to operate reliably.
Number of Beams
2 Bundles

Number of Beams

The number of beams indicates the quantity of infrared rays connecting the transmitter to the receiver. More beams mean greater coverage height and fewer false alarms, as all beams must be interrupted simultaneously to trigger the system.
Operating Voltage
10.5-28V

Operating Voltage

It refers to wired beam detectors and indicates how much voltage (in Volts) the detector needs to operate.
Protection Certification
IP54

Protection Certification

IP54
Suitable for indoor or outdoor areas with limited dust. Provides protection against the ingress of objects and withstands light rain or water splashes.
Length
23 cm

Length

Usually, the greater the length, the more beams there are in the device, and therefore the greater the coverage length of the detector.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.