Skroutz.mt

Bass Polska Welding Machine Inverter MAG / MIG / TIG / MMA / FCAW with Maximum Welding Current 250A and Duty Cycle 60%
Welding Machines

Bass Polska Welding Machine Inverter MAG / MIG / TIG / MMA / FCAW with Maximum Welding Current 250A and Duty Cycle 60%

Key features:

  • MMA, MIG/MAG, TIG and FCAW
  • Input power: 4.8 kW
  • Current: 45 A
See full description

  • Welding Current

    250

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

4 in 1 welding machine with inverter MIG MAG MMA TIG 250A with and without gas + accessories (BP-4866)

  • Functions: MMA, MIG/MAG, TIG, and FCAW
  • Power unit: Single-phase 230 V / 50 Hz
  • Input current: 4.8 kW
  • Current: 45 A
  • Voltage: 68 V
  • Maximum MAG current: 35 - 250 A
  • Welding cable: 0.6 - 0.8 mm
  • Electrodes: 1.6 - 3.2 mm
  • MMA: 20 - 250 A
  • TIG lift: 15 - 135 A
  • Cooler: Air-cooled
  • Circuit fluctuations: 60%

Included:

  • MIG/MAG welding cable with handle, 200 cm
  • MMA electrode cable 250 A with holder, 400 cm
  • Ground cable 150 cm
  • Welding brush
  • Welding mask
  • Welding cable 0.5 kg

Advantages:

  • The Bass Polska welder allows welding without gas using the FCAW (Flux) method, combining the advantages of MMA and MIG/MAG welding.
  • It is ideal for DIY enthusiasts who do not wish to invest in a machine with a gas cylinder.
  • Features inverter technology.
  • Equipped with standby and overload indicators.

Features & Functions

  • The Bass Polska welding machine allows gasless welding using the FCAW (Flux) method, combining the advantages of MMA and MIG/MAG welding.
  • It is ideal for DIY enthusiasts who do not wish to invest in a machine with a gas cylinder.
  • It features inverter technology.
  • Equipped with standby and overload indicators.

Specifications

  • Functions: MMA, MIG/MAG, TIG, and FCAW
  • Power unit: Single-phase 230 V / 50 Hz
  • Input current: 4.8 kW
  • Current: 45 A
  • Voltage: 68 V
  • Maximum MAG current: 35 - 250 A
  • Welding wire: 0.6 - 0.8 mm
  • Electrodes: 1.6 - 3.2 mm
  • MMA: 20 - 250 A
  • TIG lift: 15 - 135 A
  • Cooling: Air-cooled
  • Circuit fluctuations: 60%

Includes

  • MIG/MAG welding cable with handle, 200 cm
  • MMA electrode cable 250 A with holder, 400 cm
  • Ground cable 150 cm
  • Welding brush
  • Welding mask
  • Welding wire 0.5 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MAG, MIG, TIG, MMA, FCAW

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

FCAW
It uses flux-coated wire, which releases gases as it burns, creating a protective zone around the molten metal.
Welding Current (max)
250 A

Welding Current (max): 250


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Maximum Electrode Diameter
3.2 mm

Maximum Electrode Diameter: 3.2


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Weight
7900 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

4 in 1 welding machine with inverter MIG MAG MMA TIG 250A with and without gas + accessories (BP-4866)

  • Functions: MMA, MIG/MAG, TIG, and FCAW
  • Power unit: Single-phase 230 V / 50 Hz
  • Input current: 4.8 kW
  • Current: 45 A
  • Voltage: 68 V
  • Maximum MAG current: 35 - 250 A
  • Welding cable: 0.6 - 0.8 mm
  • Electrodes: 1.6 - 3.2 mm
  • MMA: 20 - 250 A
  • TIG lift: 15 - 135 A
  • Cooler: Air-cooled
  • Circuit fluctuations: 60%

Included:

  • MIG/MAG welding cable with handle, 200 cm
  • MMA electrode cable 250 A with holder, 400 cm
  • Ground cable 150 cm
  • Welding brush
  • Welding mask
  • Welding cable 0.5 kg

Advantages:

  • The Bass Polska welder allows welding without gas using the FCAW (Flux) method, combining the advantages of MMA and MIG/MAG welding.
  • It is ideal for DIY enthusiasts who do not wish to invest in a machine with a gas cylinder.
  • Features inverter technology.
  • Equipped with standby and overload indicators.

Features & Functions

  • The Bass Polska welding machine allows gasless welding using the FCAW (Flux) method, combining the advantages of MMA and MIG/MAG welding.
  • It is ideal for DIY enthusiasts who do not wish to invest in a machine with a gas cylinder.
  • It features inverter technology.
  • Equipped with standby and overload indicators.

Specifications

  • Functions: MMA, MIG/MAG, TIG, and FCAW
  • Power unit: Single-phase 230 V / 50 Hz
  • Input current: 4.8 kW
  • Current: 45 A
  • Voltage: 68 V
  • Maximum MAG current: 35 - 250 A
  • Welding wire: 0.6 - 0.8 mm
  • Electrodes: 1.6 - 3.2 mm
  • MMA: 20 - 250 A
  • TIG lift: 15 - 135 A
  • Cooling: Air-cooled
  • Circuit fluctuations: 60%

Includes

  • MIG/MAG welding cable with handle, 200 cm
  • MMA electrode cable 250 A with holder, 400 cm
  • Ground cable 150 cm
  • Welding brush
  • Welding mask
  • Welding wire 0.5 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MAG, MIG, TIG, MMA, FCAW

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

FCAW
It uses flux-coated wire, which releases gases as it burns, creating a protective zone around the molten metal.
Welding Current (max)
250 A

Welding Current (max): 250


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Maximum Electrode Diameter
3.2 mm

Maximum Electrode Diameter: 3.2


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Weight
7900 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.