Tetralux Tilelux water-based paint is designed for wall tiles in damp areas, such as bathrooms and shower stalls. It has a satin finish and, when used with STEPlus, adheres even to glossy tiles. It resists moisture, bathroom and cleaning products, and alternating hot and cold water.
Apply without primer using a roller or brush in two coats; depending on the shade and the surface gloss, a third coat may be required. Before application, mix STEPlus into the paint, stirring thoroughly for about 5 minutes. Use the mixture within 10 days. After application, optimal performance and adhesion are achieved in 15–20 days; during this period, avoid impacts, rubbing and cleaning the surface.
- Type: Water-based paint for wall tiles
- Colour: Blue
- Gloss level: Satin
- Volume: 750 ml
- Additive: STEPlus
- Dilution: 10–15% with water
- Application: With a roller or brush
- Coats: 2, with the option of a third depending on the shade and surface gloss
- Coverage: Approximately 12–14 m²/l on properly prepared surfaces
- Application temperature: 12–25 °C
- Cleaning painted surfaces: With a mild detergent and a soft sponge
- Cleaning tools: Immediately after application with water and, if needed, detergent
Specifications
- Type
- Colour
- Colour
- Blue
- Acrilyc
- No
- Luminosity
- Satine
Quantity
- Volume
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.