TILELUX by Tetralux is a satin-finish water-based paint for wall tiles, designed for surfaces in damp areas such as bathrooms and showers. It adheres even to glossy tiles and resists moisture, bathroom products and cleaning agents, as well as alternating hot and cold water. No primer is required.
Before application, mix with the special STEPlus additive for approximately 5 minutes. Apply in two coats using a roller or brush; a third coat may be required depending on the shade and glossiness of the surface. The mixture with the additive must be used within 10 days. Apply at a temperature of 12–25 °C. Optimal performance and adhesion are achieved 15–20 days after application. During this period, avoid impacts, abrasion and cleaning the surface. Clean the painted surface with a mild detergent and a soft sponge.
- Type: Water-based paint for wall tiles
- Colour: White
- Finish: Satin
- Volume: 750 ml
- Thinning: 10–15% with water
- Application: Two coats using a roller or brush, with the option of a third coat
- Coverage: 12–14 m²/l on suitably prepared surfaces
- Resistance: To moisture, bathroom products, cleaning agents and alternating hot and cold water
- Tool cleaning: Immediately after application with water and, if needed, detergent
Specifications
- Type
- Remover
- Colour
- White
- Acrilyc
- No
- Luminosity
- Satine
Quantity
- Volume
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.