Tetralux Tilelux satin tile paint is intended for wall tiles and humid areas such as bathrooms and showers. Its formulation, combined with the special STEPlus additive, provides adhesion even on glossy tiles and resistance to bathroom and cleaning products, diluted bleach, white vinegar, and alternating hot and cold water. No primer is required.
Before application, mix the paint with STEPlus for approximately 5 minutes and use within 10 days. Apply with a roller or brush in two coats; a third coat may be needed depending on the shade and the surface’s gloss. Maximum performance and adhesion are achieved 15–20 days after application. During this period, avoid impacts, abrasion, and cleaning the surface.
- Type: Water-based paint for wall tiles
- Colour: Pink
- Finish: Satin
- Volume: 750 ml
- Dilution: 10–15% with water
- Application: Apply with a roller or brush in two coats
- Coverage: Approximately 12–14 m²/l on suitably prepared surfaces
- Application temperature: 12–25 °C
- Surface cleaning: With a mild detergent and a soft sponge
- Tool cleaning: Immediately after application, with water and detergent if needed
Specifications
- Type
- Remover
- Colour
- Pink
- Acrilyc
- No
- Luminosity
- Satine
Quantity
- Volume
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.