The Audac AMP203 power amplifier is a compact stereo amplifier with a four-channel Dante/AES67 network input. It delivers 2 × 30 W in stereo mode or 1 × 60 W in bridged mode. It is powered via 802.3bt PoE over an Ethernet cable or with 24 V DC.

DSP functions allow configuration via AUDAC Touch 2 or through RS-485 and Ethernet. The enclosure is cooled by natural air circulation, with no fan. It features protection against overheating, overload and DC short circuits, as well as signal limiting.

• Type: Power amplifier
• Technology: Solid
• Channels: Stereo
• RMS/AES power at 2 Ω in bridged mode: 1 × 60 W
• RMS/AES power at 4 Ω in stereo mode: 2 × 30 W
• RMS/AES power at 4 Ω in bridged mode: 1 × 60 W
• RMS/AES power at 8 Ω in stereo mode: 2 × 30 W
• RMS/AES power at 8 Ω in bridged mode: 1 × 30 W
• Inputs: 1 × Ethernet, RS-485, four-channel Dante/AES67
• Outputs: 1 × stereo speaker output, 1 × line output
• Input connectors: RJ45
• Output connectors: 4-pin Euroblock with 5.08 mm pitch and 3-pin Euroblock with 3.81 mm pitch
• Control: RS-485, TCP/IP
• Power supply: 802.3bt PoE or 24 V DC
• Maximum power consumption: 80 W
• Power consumption at rated operation (1/8 MUP): 10.6 W
• Standby power consumption: 3 W
• Idle power consumption: 6.6 W
• Cooling: Natural air circulation
• Width: 16.5 cm
• Height: 4.4 cm
• Depth: 10.8 cm
• Weight: 0.7 kg