Audio Signal Processors

Dps-2 Linear Super Low Noise Dual Audio Power Supply Black

The RME DPS-2 audio power supply features two DC outputs with different processing: a linear output with passive and active multistage filtering, and a μFilter output with high-performance active...

The RME DPS-2 audio power supply features two DC outputs with different processing: a linear output with passive and active multistage filtering, and a μFilter output with high-performance active filters. Sensor technology measures and adjusts the voltage at the cable’s DC connector, and only one output can be used at a time.

On the AC mains side, a...

See full description See full description
969,00 €
769 00 €
-20%
price drop
Lowest price '26
Delivery by Thu, 26 Nov
14,00 €   shipping cost
Sent from Greece
From Soundimage 5.0 (39)

Learn more about invoicing

Description

Description

The RME DPS-2 audio power supply features two DC outputs with different processing: a linear output with passive and active multistage filtering, and a μFilter output with high-performance active filters. Sensor technology measures and adjusts the voltage at the cable’s DC connector, and only one output can be used at a time.

On the AC mains side, a two-stage HF filter and a DC filter reduce interference. The 60 VA toroidal transformer has an additional isolation winding and magnetic shielding. The GND lift switch disconnects DC ground from protective earth, while two multicolour status LEDs indicate operating status and errors. AutoDark keeps the LEDs off except in the event of an error and briefly during power-up.

  • Type: Linear audio power supply
  • Outputs: Linear DC and DC μFilter, one active at a time
  • Linear DC output voltage: 12.2 V at 0 A, 11.5 V at 3 A
  • μFilter output voltage: 12.0 V
  • Continuous output current: 2.5 A per output
  • Continuous output power: 30 W per output
  • Maximum linear DC output current: 4 A
  • Maximum μFilter output current: 3.5 A
  • Linear DC noise at 1 A, AES17: 30 μV, 3 μV A-weighted
  • Linear DC noise at 1 A, 100 kHz bandwidth: 30 μV, 4 μV A-weighted
  • Linear DC noise at 2 A, AES17: 111 μV, 14 μV A-weighted
  • Linear DC noise at 2 A, 100 kHz bandwidth: 111 μV, 14 μV A-weighted
  • Output impedance with cable, linear DC: 0.22 Ω
  • Output impedance with cable, μFilter: 0.012 Ω
  • Linear DC load regulation at 0/1/2 A: 3.63%
  • μFilter load regulation at 0/1/2 A: 0.20%
  • Linear DC overload protection: Above 5 A
  • μFilter overload protection: Above 3.2 A
  • Overheating protection: Above 80 °C
  • Mains input voltage: 115 V or 230 V, selectable via an internal jumper
  • Input voltage range: 95–130 V or 200–260 V
  • Standby power consumption: 1.6 W
  • Power consumption with a 2 A load on the linear output: 38.5 W
  • Power consumption with a 2 A load on the μFilter output: 39.8 W
  • Transformer: Toroidal, 60 VA, with isolation winding and magnetic shielding
  • Mains filters: Two-stage HF and DC
  • Ground switch: GND lift, disconnects DC ground from protective earth
  • Ground connection: Screw terminal
  • Indicators: Two multicolour status LEDs with AutoDark function
  • Dimensions: 130 x 44 x 205 mm
  • Weight: 1.89 kg
  • Operating temperature range: +5 to +40 °C
  • Package contents: Two 1 m DC sensor connection cables, one with a locking 2.1 x 5.5 mm DC plug and one with a 2.1 x 5.5 mm DC plug, manual, 1.5 m IEC power cable

Manufacturer

See full description

Description

The RME DPS-2 audio power supply features two DC outputs with different processing: a linear output with passive and active multistage filtering, and a μFilter output with high-performance active filters. Sensor technology measures and adjusts the voltage at the cable’s DC connector, and only one output can be used at a time.

On the AC mains side, a two-stage HF filter and a DC filter reduce interference. The 60 VA toroidal transformer has an additional isolation winding and magnetic shielding. The GND lift switch disconnects DC ground from protective earth, while two multicolour status LEDs indicate operating status and errors. AutoDark keeps the LEDs off except in the event of an error and briefly during power-up.

  • Type: Linear audio power supply
  • Outputs: Linear DC and DC μFilter, one active at a time
  • Linear DC output voltage: 12.2 V at 0 A, 11.5 V at 3 A
  • μFilter output voltage: 12.0 V
  • Continuous output current: 2.5 A per output
  • Continuous output power: 30 W per output
  • Maximum linear DC output current: 4 A
  • Maximum μFilter output current: 3.5 A
  • Linear DC noise at 1 A, AES17: 30 μV, 3 μV A-weighted
  • Linear DC noise at 1 A, 100 kHz bandwidth: 30 μV, 4 μV A-weighted
  • Linear DC noise at 2 A, AES17: 111 μV, 14 μV A-weighted
  • Linear DC noise at 2 A, 100 kHz bandwidth: 111 μV, 14 μV A-weighted
  • Output impedance with cable, linear DC: 0.22 Ω
  • Output impedance with cable, μFilter: 0.012 Ω
  • Linear DC load regulation at 0/1/2 A: 3.63%
  • μFilter load regulation at 0/1/2 A: 0.20%
  • Linear DC overload protection: Above 5 A
  • μFilter overload protection: Above 3.2 A
  • Overheating protection: Above 80 °C
  • Mains input voltage: 115 V or 230 V, selectable via an internal jumper
  • Input voltage range: 95–130 V or 200–260 V
  • Standby power consumption: 1.6 W
  • Power consumption with a 2 A load on the linear output: 38.5 W
  • Power consumption with a 2 A load on the μFilter output: 39.8 W
  • Transformer: Toroidal, 60 VA, with isolation winding and magnetic shielding
  • Mains filters: Two-stage HF and DC
  • Ground switch: GND lift, disconnects DC ground from protective earth
  • Ground connection: Screw terminal
  • Indicators: Two multicolour status LEDs with AutoDark function
  • Dimensions: 130 x 44 x 205 mm
  • Weight: 1.89 kg
  • Operating temperature range: +5 to +40 °C
  • Package contents: Two 1 m DC sensor connection cables, one with a locking 2.1 x 5.5 mm DC plug and one with a 2.1 x 5.5 mm DC plug, manual, 1.5 m IEC power cable

Manufacturer

RME - Audio Signal Processors RME
769,00 €
14,00 €   shipping cost