• Welding capability with 220 A current
• Can be equipped with a clamp featuring an optional UP/DOWN switch on the handle to adjust the Amperage
• Offers the most workshop welding lines compared to other manufacturers. Suitable for steel, aluminum, stainless steel, and copper.
• For wire coils with diameters 0.8 / 0.9 / 1.0 / 1.2 mm
• For coils with a diameter of Φ200, 5 kg. There is also a second socket for coils D100
• For steel welding with wire without the need for shielding gas
• Spot and Stitch welding functions.

• Welding capability with 230 A current
• TIG welding with LiftArc start
• TIG welding with pulse currents
• TIG welding with TAC function for very thin sheets
• Welding gas fed internally via an electrovalve
• Clamp with the ability to adjust Amperage from the handle.

• Welding capability with 180 A current
• Electrode welding for electrodes with diameter 1.5 – 4 mm (can also weld electrodes with diameter 5 mm, but in a limited number of pieces)
• Electrode welding with ideal ignition without risk of electrode sticking.

The system is designed to make users' lives easier and reduce the time for changes whenever they arise. For example, switching from one gas for MAG wire welding to a gas for TIG is very simple. The system has 2 solenoid valves. One for MIG/MAG welding and one for TIG. We put in the appropriate gases and weld immediately. In terms of changing the wire torch, the changeover time is even more reduced due to the special FSC connector that releases the torch very quickly. The polarity change in case of TIG welding is done very quickly, thanks to the integrated external polarity change cable. Finally, the easy change of wire coils is done by opening the right side and selecting the ideal coil diameter. Choice of coils D100 (1.0 Kg) and D200 (5 Kg) and wire diameter 0.6 -1.2 millimeters. Also, inside the space where the wire coils are located, there is a special holder for your additional rollers and torch consumables. Everything is organized and in place so you don't have to carry extra boxes, bags, and toolboxes.

This system is designed with all the necessary elements for easy transport to any difficult location where welding is needed. The steel bar it features is ideal for carrying and balancing the weight in hand. It also comes with a shoulder strap for long-distance transport without tiring the welder. Its weight is only 15 Kg. There is also an ergonomic case available if needed, which holds all the accessories and the power source, as well as a transport trolley with a base for the gas cylinder.
The TransSteel 2200 is the ideal choice for all situations. Whether you want to operate it on a simple household socket, with a generator, or with very long extension cords. Regarding the socket, by entering the machine's menu, you can select a fuse of 10 A /13 A & 16 A. This means that when you go to a house to make a repair and the socket you want to weld keeps tripping the relay because it has a 10 A fuse, you simply enter the menu, select 10 A, and weld normally without any problem. In terms of flexibility, it is fully compatible for use with a generator and operates correctly even with voltage fluctuations. This also applies to household and factory electricity. Finally, when using the machine even with very long extension cords, its performance is impeccable and welds without problems.