Description
Specifications
Vitex Diaxyl Plus impregnating varnish is water- and polyurethane-based and is intended for indoor and outdoor wooden surfaces. It penetrates the wood, forming a thin film that allows it to breathe while protecting it from moisture and UV radiation. Its elasticity accommodates the wood’s expansion and contraction, while its formula prevents mould and fungi from developing on the film.
Apply to a clean, dry surface using a roller, brush or airless sprayer. It is ready to use without dilution and is touch-dry in 2–3 hours. Recoat after 24 hours.
- Type: Impregnating varnish
- Base: Water and polyurethane
- Application surface: Wood
- Use: Indoor and outdoor
- Colour: Ebony
- Quantity: 750 ml
- Protection: Against moisture and UV radiation
- Coverage per coat: 12–16 m²/l
- Coverage in two coats: 6–8 m²/l
- Touch-dry time: 2–3 hours
- Recoating time: 24 hours
- Application: With a roller, brush or airless sprayer
- Dilution: Not required
- Tool cleaning: With water and, if necessary, soap or detergent
- Application temperature: 5–35 °C
- Application relative humidity: Below 80%
- Maximum wood moisture content: 18%
- Volatile organic compounds (VOC): Maximum 129 g/l
- Type
- Impregnation Varnish
- Surface Material
- of Wood
- Insecticide / Antifungal
- No
- Diluting Agent
- Water
- Polyurethane
- Yes
- 2-Component
- No
- Quantity
- 0.75 lt
- Colour
- Ebony
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.