Skroutz.mt

LS2 Funny II Paws Pink Kids Motorcycle Helmet Jet ECE 22.06 1100gr
Motorcycle Helmets

LS2 Funny II Paws Pink Kids Motorcycle Helmet Jet ECE 22.06 1100gr Code: 36622 22 46

Material: KPA (Kinetic Polymer Alloy) blend of polycarbonate and thermoplastic materials specially formulated by LS2.

1 shell.

2 adjustable air vents on the top of the helmet with air exhaust points...

Material: KPA (Kinetic Polymer Alloy) blend of polycarbonate and thermoplastic materials specially formulated by LS2.

1 shell.

2 adjustable air vents on the top of the helmet with air exhaust points at the back.

Fully removable and washable hypoallergenic interior.

Clear Anti-Scratch visor with UV protection.

Prepared to accept Pinlock 70 Max Vision (Sold...

See full description See full description

  • Type

    Jet

    The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • Color Finish Glossy
  • See all

Size

LS2 size guide
LS2 size guide

Size

LS2 size guide
Manufacturer's International
Review the product
Product report

Description

Description

Material: KPA (Kinetic Polymer Alloy) blend of polycarbonate and thermoplastic materials specially formulated by LS2.

1 shell.

2 adjustable air vents on the top of the helmet with air exhaust points at the back.

Fully removable and washable hypoallergenic interior.

Clear Anti-Scratch visor with UV protection.

Prepared to accept Pinlock® 70 Max Vision (Sold Separately).

Quick and easy visor replacement system.

Fastening: micrometric.

Weight: 1100 +/-50gr.

Certification: ECE 22.06.

Sizes:

  • S=47-48cm
  • M=49-50cm
  • L=51-52cm

Innovative KPA Material for Maximum Lightness

The Funny II is made from KPA (Kinetic Polymer Alloy), an innovative polymer blend that offers the ideal balance between flexibility and strength. This material allows the helmet to be extremely lightweight, weighing only 1100 (±50 g), which is crucial for protecting a child’s neck. Despite its low weight, the shell is exceptionally sturdy, providing the necessary safety required by the new strict ECE 22.06 certification.

Advanced Safety System & EPS

The safety of children is LS2's top priority. The inner shell is made of EPS of different densities, which effectively absorbs impact forces. Additionally, the helmet features an Emergency Release System for quick removal of the pads if needed, as well as a reinforced chin strap with a quick-release micrometric buckle, offering reassurance and easy fitting by parents.

Integrated Ventilation Channelled EPS

To keep the child’s head cool, the Funny II features an advanced ventilation system. The top air vents work perfectly with the special ventilation channels inside the Channelled EPS, allowing air to circulate freely. This system prevents overheating and sweating, making the ride pleasant even during the hot summer months, offering a feeling of freshness with every use.

Anti-Scratch Visor with UV Protection

Visibility is ensured thanks to the high-quality anti-scratch visor, which is designed to withstand the minor wear and tear of daily use. It also offers complete protection from UV radiation, shielding sensitive children's eyes from the sun. An important feature for its category is that the visor is ready for the Pinlock® 70 MaxVision™ system, allowing the installation of an anti-fog film for clear vision in all weather conditions.

Premium Comfort with Laser-Cut Lining

The interior of the LS2 Funny II is designed to offer a comfortable embrace. The lining is made with Laser-Cut technology, ensuring a perfect fit to the facial proportions without applying pressure. It is made from hypoallergenic and breathable materials, and is fully removable and washable. This way, the helmet remains clean and hygienic for a long time, providing a premium feel every time it touches the skin.

Multicolored Graphics & Kids' Sizes

The Funny II is not only safe, but also fun. It is available in a wide range of colors and impressive graphics that young riders will love. Available in sizes from S to L (children's scale), covering head circumferences from approximately 48cm to 52cm. With the LS2 guarantee and its modern design, it is the best introduction to the world of two-wheeled transportation with absolute safety.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
36622 22 46

Dimensions

Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Weight (+/-50 gr)
1100 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Pink
Color Finish
Glossy
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Material: KPA (Kinetic Polymer Alloy) blend of polycarbonate and thermoplastic materials specially formulated by LS2.

1 shell.

2 adjustable air vents on the top of the helmet with air exhaust points at the back.

Fully removable and washable hypoallergenic interior.

Clear Anti-Scratch visor with UV protection.

Prepared to accept Pinlock® 70 Max Vision (Sold Separately).

Quick and easy visor replacement system.

Fastening: micrometric.

Weight: 1100 +/-50gr.

Certification: ECE 22.06.

Sizes:

  • S=47-48cm
  • M=49-50cm
  • L=51-52cm

Innovative KPA Material for Maximum Lightness

The Funny II is made from KPA (Kinetic Polymer Alloy), an innovative polymer blend that offers the ideal balance between flexibility and strength. This material allows the helmet to be extremely lightweight, weighing only 1100 (±50 g), which is crucial for protecting a child’s neck. Despite its low weight, the shell is exceptionally sturdy, providing the necessary safety required by the new strict ECE 22.06 certification.

Advanced Safety System & EPS

The safety of children is LS2's top priority. The inner shell is made of EPS of different densities, which effectively absorbs impact forces. Additionally, the helmet features an Emergency Release System for quick removal of the pads if needed, as well as a reinforced chin strap with a quick-release micrometric buckle, offering reassurance and easy fitting by parents.

Integrated Ventilation Channelled EPS

To keep the child’s head cool, the Funny II features an advanced ventilation system. The top air vents work perfectly with the special ventilation channels inside the Channelled EPS, allowing air to circulate freely. This system prevents overheating and sweating, making the ride pleasant even during the hot summer months, offering a feeling of freshness with every use.

Anti-Scratch Visor with UV Protection

Visibility is ensured thanks to the high-quality anti-scratch visor, which is designed to withstand the minor wear and tear of daily use. It also offers complete protection from UV radiation, shielding sensitive children's eyes from the sun. An important feature for its category is that the visor is ready for the Pinlock® 70 MaxVision™ system, allowing the installation of an anti-fog film for clear vision in all weather conditions.

Premium Comfort with Laser-Cut Lining

The interior of the LS2 Funny II is designed to offer a comfortable embrace. The lining is made with Laser-Cut technology, ensuring a perfect fit to the facial proportions without applying pressure. It is made from hypoallergenic and breathable materials, and is fully removable and washable. This way, the helmet remains clean and hygienic for a long time, providing a premium feel every time it touches the skin.

Multicolored Graphics & Kids' Sizes

The Funny II is not only safe, but also fun. It is available in a wide range of colors and impressive graphics that young riders will love. Available in sizes from S to L (children's scale), covering head circumferences from approximately 48cm to 52cm. With the LS2 guarantee and its modern design, it is the best introduction to the world of two-wheeled transportation with absolute safety.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
36622 22 46

Dimensions

Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Weight (+/-50 gr)
1100 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Pink
Color Finish
Glossy
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

85,00 €
20,00 €   shipping cost