CCTV Accessories

RME CCTV Accessories

The RME LNI-2 DC CCTV accessory filters and stabilizes the DC power supply, isolating the output from noise and leakage currents. It accepts an input of 9–18 V DC and provides a stable 12.0 V output...

The RME LNI-2 DC CCTV accessory filters and stabilizes the DC power supply, isolating the output from noise and leakage currents. It accepts an input of 9–18 V DC and provides a stable 12.0 V output at a continuous current of up to 2 A. Sensor technology monitors the voltage directly at the cable’s DC connector, compensating for load-dependent voltage drop.

...
See full description See full description
509,00 €
399 00 €
-21%
price drop
Lowest price '26
Delivery Wed, 25 Nov - Tue, 01 Dec
14,00 €   shipping cost
Sent from Greece
From Soundimage 5.0 (39)
Greece
1 piece
See CCTV Systems on the page of Soundimage

Learn more about invoicing

Description

The RME LNI-2 DC CCTV accessory filters and stabilizes the DC power supply, isolating the output from noise and leakage currents. It accepts an input of 9–18 V DC and provides a stable 12.0 V output at a continuous current of up to 2 A. Sensor technology monitors the voltage directly at the cable’s DC connector, compensating for load-dependent voltage drop.

The μFilter features a discrete, ultra-low-noise linear regulator, soft start, and protection against thermal overload and short circuits. Two indicator LEDs show the input and output voltages and indicate overload. The output ground can optionally be connected to PE, earth, or another grounding device via a terminal screw.

  • Type: Active DC filter
  • Input voltage range: 9–18 V DC
  • Input polarity: Center positive, outer negative
  • Input connector: DC 2.1 x 5.5 mm, with or without a locking mechanism
  • Output voltage: 12.0 V DC
  • Continuous output current: 2 A
  • Maximum output current: 3 A
  • Continuous output power: 24 W
  • Idle power consumption: 0.7 W
  • Typical power consumption: 31 W with a 12 V input and a 2 A load
  • Output noise: 80 μV at 0–3 A, AES17
  • Undervoltage detection: 70 dB
  • Indicators: LEDs for input and output voltage and overload
  • Dimensions: 80 x 30 x 123 mm
  • Weight: 605 g
  • Operating temperature range: +5 °C to +40 °C
  • Relative humidity: Below 75%, non-condensing
  • Package contents: 2 DC sensor connection cables, one with a locking DC 2.1 x 5.5 mm plug and one without, each 1 m long; manual

Manufacturer

399,00 €
14,00 €   shipping cost