The Hertz DIECI POWER DP 1.500 mono car amplifier uses Class D amplification and operates with a 2 Ω load. RMS output power is 280 W at 4 Ω and 500 W at 2 Ω with 1% THD. It features Pre-In and Speaker-In inputs, as well as a full-range Pre Out.
The removable top panel protects the controls and connections, while the status LED indicates amplifier operation. The balanced input circuit helps reject noise. Settings include a low-pass filter, subsonic filter, phase selection, and bass boost.
- Channels: 1
- Amplifier class: D
- RMS power @ 1% THD: 280 W x 1 at 4 Ω, 500 W x 1 at 2 Ω
- RMS power @ 14.4 VDC, 10% THD: 350 W x 1 at 4 Ω, 590 W x 1 at 2 Ω
- Total power: 1180 W
- Minimum load impedance: 2 Ω
- Supply voltage: 11–15 VDC
- Operating voltage: 6.5–17.5 VDC
- Fuse: 1 x 30 A
- Idle current: 1 A
- Standby consumption: 50 μA
- Consumption at minimum load: 21 A
- Remote input: 4–17 VDC (1 mA)
- ART: Automatic turn-on/off via the SPK-IN input, for BTL radio, 1.5 VDC
- Efficiency: 86%
- THD: 0.2% at 100 Hz and 70% of rated power
- Damping factor: 180 at 1 kHz, 1 W
- Frequency range: 10–500 Hz at -3 dB
- Signal-to-noise ratio: 99 dBA, A-weighted, with 1 V input
- Adjustable crossovers: Yes
- Pre-In input sensitivity: 0.32–8 VRMS
- Speaker-In input sensitivity: 1.6–40 VRMS
- Low-pass filter: Off or 50–250 Hz, 24 dB/octave
- Subsonic filter: Off or 25 Hz, 24 dB/octave
- Phase: 0° or 180°
- Bass boost at 50 Hz: 0–9 dB
- Pre Out: Full range
- Dimensions: 190 x 152 x 50 mm
- Weight: 1.62 kg
- Product Number
- 02.02.0014
- Number of Channels
- 1 Channel
- Output Power (4 Ohm)
- -
- Amplifier class
- D
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.