Skroutz.mt

Heat Rate Monitor Counter with Channels and 7" Screen
Oscilloscopes & Frequency Generators

Heat Rate Monitor Counter with Channels and 7" Screen

Main Features

  • Analog bandwidth: 50 MHz
  • Rise time:
  • Number of channels: 2
  • Sampling rate: 500 MS/s
  • Memory depth: 24 Mpts
  • Waveform capture rate: 5000 wfms/s
  • Time base: 2 ns/div ~ 50 s/div
  • Vertical...

Main Features

  • Analog bandwidth: 50 MHz
  • Rise time:
  • Number of channels: 2
  • Sampling rate: 500 MS/s
  • Memory depth: 24 Mpts
  • Waveform capture rate: 5000 wfms/s
  • Time base: 2 ns/div ~ 50 s/div
  • Vertical sensitivity: 1 mV/div ~ 20 V/div
  • Data recording methods: setup, waveform, bitmap
  • Trigger methods: edge, pulse width, video signal, alternate
  • Mathematical functions:...
See full description See full description
Review the product
Product report

Description

Description

Main Features

  • Analog bandwidth: 50 MHz
  • Rise time:
  • Number of channels: 2
  • Sampling rate: 500 MS/s
  • Memory depth: 24 Mpts
  • Waveform capture rate: 5000 wfms/s
  • Time base: 2 ns/div ~ 50 s/div
  • Vertical sensitivity: 1 mV/div ~ 20 V/div
  • Data recording methods: setup, waveform, bitmap
  • Trigger methods: edge, pulse width, video signal, alternate
  • Mathematical functions: addition, subtraction, multiplication, division
  • Interfaces: USB Host, USB Device, Pass/Fail

General Characteristics

  • Power supply: 100 V~240 V AC rms, 50/60 Hz
  • Display: 7” TFT LED (800x480 px)
  • Dimensions: 306 x 138 x 124 mm
  • Weight: 2.5 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Counter
Monitor Size
7 "
Bandwidth
50 MHz
Weight
2.5 kg
Height
-
Length
-
Width
-

Signal Modulation

AM
No

AM

Information is transmitted by varying the amplitude (intensity) of the carrier signal while the frequency remains constant. It is used in RF applications and communications testing.
FM
No

FM

The information is transmitted through changes in the frequency of the carrier signal. It offers greater noise resistance compared to AM.
PM
No

PM

The information is transmitted through changes in the phase of the carrier signal. It is used in telecommunications and digital transmission systems.
PWM
No

PWM

Information is encoded by changing the duration (duty cycle) of the pulses while the amplitude remains constant. Common in power electronics and motor control.
FSK
No

FSK

Digital modulation where different frequencies correspond to different digital values (e.g., 0 and 1). It is used in modems and wireless communications.
ASK
No

ASK

Digital modulation where the information is represented by changes in the signal amplitude. It is used in simple data transmission systems.
PSK
No

Waveform Types

Sin
No

Sin

(Sinusoidal) Produces a smooth periodic waveform with continuous amplitude variation. Used in tests of electronic circuits, audio, and telecommunications.
Square
No

Square

Generates a signal that alternates between two voltage levels with abrupt transitions. Suitable for digital circuits and timing tests.
Ramp
No

Ramp

Produces a signal with a linear increase or decrease in voltage over time before the cycle repeats. Used in scanning, timing, and control systems.
Pulse
Yes

Pulse

Generates short pulses with adjustable amplitude and duration. Useful for testing digital circuits and analyzing system response.
Arbitrary
No

Arbitrary

Allows the creation or loading of custom waveforms beyond the predefined signal shapes. Suitable for specialized measurements and simulations.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Main Features

  • Analog bandwidth: 50 MHz
  • Rise time:
  • Number of channels: 2
  • Sampling rate: 500 MS/s
  • Memory depth: 24 Mpts
  • Waveform capture rate: 5000 wfms/s
  • Time base: 2 ns/div ~ 50 s/div
  • Vertical sensitivity: 1 mV/div ~ 20 V/div
  • Data recording methods: setup, waveform, bitmap
  • Trigger methods: edge, pulse width, video signal, alternate
  • Mathematical functions: addition, subtraction, multiplication, division
  • Interfaces: USB Host, USB Device, Pass/Fail

General Characteristics

  • Power supply: 100 V~240 V AC rms, 50/60 Hz
  • Display: 7” TFT LED (800x480 px)
  • Dimensions: 306 x 138 x 124 mm
  • Weight: 2.5 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Counter
Monitor Size
7 "
Bandwidth
50 MHz
Weight
2.5 kg
Height
-
Length
-
Width
-

Signal Modulation

AM
No

AM

Information is transmitted by varying the amplitude (intensity) of the carrier signal while the frequency remains constant. It is used in RF applications and communications testing.
FM
No

FM

The information is transmitted through changes in the frequency of the carrier signal. It offers greater noise resistance compared to AM.
PM
No

PM

The information is transmitted through changes in the phase of the carrier signal. It is used in telecommunications and digital transmission systems.
PWM
No

PWM

Information is encoded by changing the duration (duty cycle) of the pulses while the amplitude remains constant. Common in power electronics and motor control.
FSK
No

FSK

Digital modulation where different frequencies correspond to different digital values (e.g., 0 and 1). It is used in modems and wireless communications.
ASK
No

ASK

Digital modulation where the information is represented by changes in the signal amplitude. It is used in simple data transmission systems.
PSK
No

Waveform Types

Sin
No

Sin

(Sinusoidal) Produces a smooth periodic waveform with continuous amplitude variation. Used in tests of electronic circuits, audio, and telecommunications.
Square
No

Square

Generates a signal that alternates between two voltage levels with abrupt transitions. Suitable for digital circuits and timing tests.
Ramp
No

Ramp

Produces a signal with a linear increase or decrease in voltage over time before the cycle repeats. Used in scanning, timing, and control systems.
Pulse
Yes

Pulse

Generates short pulses with adjustable amplitude and duration. Useful for testing digital circuits and analyzing system response.
Arbitrary
No

Arbitrary

Allows the creation or loading of custom waveforms beyond the predefined signal shapes. Suitable for specialized measurements and simulations.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

424,86 €
14,00 €   shipping cost