The Vevor fiber optic fusion splicer uses 6-motor core alignment and completes a splice in 6 seconds in fast mode or 9 seconds in normal mode, with a heating time of 13 seconds. Splice loss for MM fibers is as low as 0.01 dB. The 3-in-1 fiber holder is compatible with SM, MM, DS, NZDS, UI, BUI, and EDF fibers.
The 5-inch color touchscreen supports independent X- or Y-axis viewing at 330x magnification, adjustable up to 1100x, as well as simultaneous X/Y viewing at 200x magnification. The 7800 mAh rechargeable battery supports over 260 consecutive splicing and heating cycles on a full charge, while the side USB port is used for data transfer and charging. The housing is made of ABS and PC and is resistant to dust, breakage, and impact.
The carrying case includes a fiber optic fusion splicer, fiber cleaver, fiber stripper, 3-hole pliers, alcohol bottle, air blower, cooling tray, heat-shrink tubes, brush, cotton swabs, and other tools.
-
Type: Fiber optic fusion splicer
-
Power supply: Battery
-
Alignment: Core
-
Motors: 6
-
Display: 5-inch color touchscreen
-
Splicing time: 6 seconds in fast mode, 9 seconds in normal mode
-
Heating time: 13 seconds
-
Splice loss: As low as 0.01 dB for MM fibers
-
Viewing: Independent X- or Y-axis viewing at 330x magnification, adjustable up to 1100x, or simultaneous X/Y viewing at 200x magnification
-
Fiber holder: 3-in-1
-
Fiber compatibility: SM, MM, DS, NZDS, UI, BUI, and EDF
-
Battery capacity: 7800 mAh
-
Operating cycles: Over 260 consecutive splicing and heating cycles on a full charge
-
Housing material: ABS and PC
-
Resistance: Dust, breakage, and impact resistant
-
USB port: For data transfer and charging
-
Carrying case: Included
