Skroutz.mt

Kraft & Dele Welding Machine Inverter MIG / TIG / MMA with Maximum Welding Current 220A and Duty Cycle 60%
Welding Machines

Kraft & Dele Welding Machine Inverter MIG / TIG / MMA with Maximum Welding Current 220A and Duty Cycle 60%

The Kraft & Dele welding machine uses inverter technology and supports MIG, TIG and MMA welding. MIG welding can be performed without an external gas supply when using flux-cored wire; otherwise, a...

The Kraft & Dele welding machine uses inverter technology and supports MIG, TIG and MMA welding. MIG welding can be performed without an external gas supply when using flux-cored wire; otherwise, a connection to an external gas cylinder is required. TIG welding is primarily intended for detailed welding of aluminium and stainless steel and requires...

See full description See full description

Top specs

  • Welding Current

    220

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The Kraft & Dele welding machine uses inverter technology and supports MIG, TIG and MMA welding. MIG welding can be performed without an external gas supply when using flux-cored wire; otherwise, a connection to an external gas cylinder is required. TIG welding is primarily intended for detailed welding of aluminium and stainless steel and requires experience and an external gas cylinder.

  • Type: MIG, TIG, MMA
  • Maximum welding current: 220 A
  • Duty cycle at maximum current: 60%
  • Weight: 8,000

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MIG, TIG, MMA

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
220 A

Welding Current (max): 220


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Maximum Wire Diameter
1.2 mm

Maximum Wire Diameter: 1.2


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
8000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Kraft & Dele welding machine uses inverter technology and supports MIG, TIG and MMA welding. MIG welding can be performed without an external gas supply when using flux-cored wire; otherwise, a connection to an external gas cylinder is required. TIG welding is primarily intended for detailed welding of aluminium and stainless steel and requires experience and an external gas cylinder.

  • Type: MIG, TIG, MMA
  • Maximum welding current: 220 A
  • Duty cycle at maximum current: 60%
  • Weight: 8,000

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MIG, TIG, MMA

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
220 A

Welding Current (max): 220


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Maximum Wire Diameter
1.2 mm

Maximum Wire Diameter: 1.2


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
8000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.