Skroutz.mt

Axor Striker Hitman Black/Grey Motorcycle Helmet Jet ECE 22.06 1150gr with Sunvisor
Motorcycle Helmets

Axor Striker Hitman Black/Grey Motorcycle Helmet Jet ECE 22.06 1150gr with Sunvisor

The STRIKER in beige color is a jet helmet made for riders seeking comfort, protection, and a modern look on their rides. It is lightweight and fully functional, epitomizing the everyday use helmet.

    ...

The STRIKER in beige color is a jet helmet made for riders seeking comfort, protection, and a modern look on their rides. It is lightweight and fully functional, epitomizing the everyday use helmet.

  • Outer Shell: Made from ABS (Acrylonitrile Butadiene Styrene) material, offering high impact resistance.
  • Inner Lining: Removable, washable lining for maximum...
See full description See full description

  • Type

    Jet

    The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all
The product is not available at Skroutz Last updated: 8 months ago
Product report

Description

Description

The STRIKER in beige color is a jet helmet made for riders seeking comfort, protection, and a modern look on their rides. It is lightweight and fully functional, epitomizing the everyday use helmet.

  • Outer Shell: Made from ABS (Acrylonitrile Butadiene Styrene) material, offering high impact resistance.
  • Inner Lining: Removable, washable lining for maximum hygiene. Antibacterial and hypoallergenic from high-quality moisture-wicking materials.
  • Ventilation: Multi-vent system for optimal airflow.
  • Visor: Anti-scratch visor with UV protection. Includes an internal sun visor.
  • Closure System: Micrometric buckle quick-release fastening system with multiple positions.
  • Certification: Approved with ECE R-22.06.
  • Weight: 1150gr (+/- 50gr).
  • Compatibility: Compatible with Bluetooth communication systems.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Weight (+/-50 gr)
1150 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Color Finish
-
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (14)

Reviews

3.5
14
3.5
Review this product
  1. 5
  2. 4
  3. 1
  4. 2
  5. 2
Review this product
  • Ventilation
  • Visibility
  • Weight
  • Application
  • Value for money
  • Construction quality
  • High aerodynamic noise

Description & Specifications

The STRIKER in beige color is a jet helmet made for riders seeking comfort, protection, and a modern look on their rides. It is lightweight and fully functional, epitomizing the everyday use helmet.

  • Outer Shell: Made from ABS (Acrylonitrile Butadiene Styrene) material, offering high impact resistance.
  • Inner Lining: Removable, washable lining for maximum hygiene. Antibacterial and hypoallergenic from high-quality moisture-wicking materials.
  • Ventilation: Multi-vent system for optimal airflow.
  • Visor: Anti-scratch visor with UV protection. Includes an internal sun visor.
  • Closure System: Micrometric buckle quick-release fastening system with multiple positions.
  • Certification: Approved with ECE R-22.06.
  • Weight: 1150gr (+/- 50gr).
  • Compatibility: Compatible with Bluetooth communication systems.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Weight (+/-50 gr)
1150 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Color Finish
-
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (14)

3.5
14
3.5
Review this product
  1. 5
  2. 4
  3. 1
  4. 2
  5. 2
Review this product
  • Ventilation
  • Visibility
  • Weight
  • Application
  • Value for money
  • Construction quality
  • High aerodynamic noise