Switches

NetGear GS305PP Unmanaged L3 PoE+ Switch with 5 Gigabit (1Gbps) Ethernet Ports

The NetGear GS305PP switch connects devices in small business or home networks through 5 Gigabit Ethernet ports. Its 4 PoE+ ports can power devices such as IP cameras over Ethernet, with up to 30 W...

The NetGear GS305PP switch connects devices in small business or home networks through 5 Gigabit Ethernet ports. Its 4 PoE+ ports can power devices such as IP cameras over Ethernet, with up to 30 W per port and a total available power budget of 83 W. It operates as an unmanaged switch and requires no configuration, while Auto MDI/MDI-X automatically adjusts...

See full description See full description

Learn more about invoicing

Description

Description

The NetGear GS305PP switch connects devices in small business or home networks through 5 Gigabit Ethernet ports. Its 4 PoE+ ports can power devices such as IP cameras over Ethernet, with up to 30 W per port and a total available power budget of 83 W. It operates as an unmanaged switch and requires no configuration, while Auto MDI/MDI-X automatically adjusts connections.

The metal housing supports desktop use or wall mounting. LED indicators show activity, connection, power, and PoE status, and the switch operates silently.

  • Type: Unmanaged L3 switch
  • Ethernet ports: 5 Gigabit Ethernet (10/100/1000 Mbps)
  • PoE+ ports: 4, up to 30 W per port
  • Total PoE power: 83 W
  • PoE standards: 802.3af, 802.3at
  • Switching capacity: 10 Gbit/s
  • Forwarding rate: 1,448 Mpps
  • Latency at 1 Gbps: 2.4 μs
  • MAC address table: 2000 entries
  • Packet buffer memory: 128 MB
  • Jumbo frames: Supported
  • Network standards: IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3, IEEE 802.3ab, IEEE 802.1p
  • Ethernet cabling technologies: 10BASE-T, 100BASE-TX, 1000BASE-T
  • Connection features: Auto-negotiation, Auto MDI/MDI-X, auto-sensing, full duplex, cable length detection
  • Traffic management: Quality of Service (QoS)
  • LED indicators: Activity, connection, power, and PoE
  • Installation: Plug-and-Play, desktop use or wall mounting
  • Housing: Metal, black
  • Reset button: Yes
  • Power supply: DC via DC-in jack, 54 V and 1.66 A
  • Typical power consumption: 2.89 W
  • Maximum power consumption: 88.89 W
  • Heat dissipation: 304 BTU/h
  • Operating temperature: 0 to 40 °C
  • Operating relative humidity: 10–90%
  • Storage temperature: -20 to 70 °C
  • Storage relative humidity: 5–95%
  • Mean time between failures (MTBF): 6,710,127 hours
  • Switch dimensions: 158 × 101 × 29 mm (width × depth × height)
  • Switch weight: 410 g
  • Package dimensions: 269 × 73 × 215 mm (width × depth × height)
  • Package weight: 1.3 kg
  • Package contents: Manual

Manufacturer

See full description

Specifications

Specifications

Network Specifications

Type
Unmanaged
Layer
L3
PoE
Yes
PoE Version
802.3af, 802.3at

Technical Specifications

Ethernet connections
5 Port
Ethernet Speed
1000 Mbps
Rack mounting
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The NetGear GS305PP switch connects devices in small business or home networks through 5 Gigabit Ethernet ports. Its 4 PoE+ ports can power devices such as IP cameras over Ethernet, with up to 30 W per port and a total available power budget of 83 W. It operates as an unmanaged switch and requires no configuration, while Auto MDI/MDI-X automatically adjusts connections.

The metal housing supports desktop use or wall mounting. LED indicators show activity, connection, power, and PoE status, and the switch operates silently.

  • Type: Unmanaged L3 switch
  • Ethernet ports: 5 Gigabit Ethernet (10/100/1000 Mbps)
  • PoE+ ports: 4, up to 30 W per port
  • Total PoE power: 83 W
  • PoE standards: 802.3af, 802.3at
  • Switching capacity: 10 Gbit/s
  • Forwarding rate: 1,448 Mpps
  • Latency at 1 Gbps: 2.4 μs
  • MAC address table: 2000 entries
  • Packet buffer memory: 128 MB
  • Jumbo frames: Supported
  • Network standards: IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3, IEEE 802.3ab, IEEE 802.1p
  • Ethernet cabling technologies: 10BASE-T, 100BASE-TX, 1000BASE-T
  • Connection features: Auto-negotiation, Auto MDI/MDI-X, auto-sensing, full duplex, cable length detection
  • Traffic management: Quality of Service (QoS)
  • LED indicators: Activity, connection, power, and PoE
  • Installation: Plug-and-Play, desktop use or wall mounting
  • Housing: Metal, black
  • Reset button: Yes
  • Power supply: DC via DC-in jack, 54 V and 1.66 A
  • Typical power consumption: 2.89 W
  • Maximum power consumption: 88.89 W
  • Heat dissipation: 304 BTU/h
  • Operating temperature: 0 to 40 °C
  • Operating relative humidity: 10–90%
  • Storage temperature: -20 to 70 °C
  • Storage relative humidity: 5–95%
  • Mean time between failures (MTBF): 6,710,127 hours
  • Switch dimensions: 158 × 101 × 29 mm (width × depth × height)
  • Switch weight: 410 g
  • Package dimensions: 269 × 73 × 215 mm (width × depth × height)
  • Package weight: 1.3 kg
  • Package contents: Manual

Manufacturer

Network Specifications

Type
Unmanaged
Layer
L3
PoE
Yes
PoE Version
802.3af, 802.3at

Technical Specifications

Ethernet connections
5 Port
Ethernet Speed
1000 Mbps
Rack mounting
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

95,00 €
14,00 €   shipping cost