The STC-1000 thermostat regulates temperature in heating or cooling mode and can be used with heating pumps, circulator pumps, and fans. The relay operates according to the set temperature and hysteresis, and supports temperature calibration and compressor delay. It features an LCD and an alarm for temperature exceedance or sensor error.
- Power supply: 220 VAC ±10%, 50/60 Hz
- Temperature measurement range: -50°C to 99°C
- Measurement accuracy: ±1°C from -50°C to 70°C
- Measurement resolution: 0.1°C
- Temperature setting range: -50°C to 90°C
- Sensor: NTC
- Relay contact load: 10 A / 250 VAC for cooling and heating
- Maximum connected load: 2.5 kW for cooling and 2.5 kW for heating
- Sensor error delay: 1 minute
- Operating temperature: 0°C to 60°C
- Permissible humidity: 20% to 85%
- Storage temperature: -30°C to 75°C
- Dimensions: 75 × 34 × 85 mm
- Front panel dimensions: 75 × 34 mm
- Mounting dimensions: 70 × 27 mm
- Sensor cable length: approximately 1 m
- Package contents: Thermostat, temperature sensor
Dimensions
- Type
- Thermostat
- Construction Material [Pharmaceutical]
- -
- Smart / WiFi
- No
Technical Parameters
- Thread / Cross-section
- -
- Power
- -
- Maximum Pressure
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.