Vivechrom Vivelack wood stain varnish protects and decorates interior and exterior wooden surfaces, such as doors, windows, frames, handrails and wood cladding. It is based on synthetic resins and forms an elastic, hard film with a glossy finish.
Apply with a brush or roller to a clean, dry and sanded surface. For new or bare wood, first apply 1–2 coats of VIVEXYL wood preservative to protect against fungi. For maintenance of previously varnished surfaces, one coat is sufficient. Thin by up to 3% by volume with brush cleaner, and clean tools with the same thinner. Do not apply at temperatures below 10°C. Work in a well-ventilated area.
- Type: Wood stain varnish
- Colour: Clear
- Gloss level: Gloss
- Thinning: With thinner, up to 3% by volume
- Suitable surfaces: Wood
- Suitable areas: Interior and exterior
- Application: With a brush or roller
- Coverage: Approx. 12 m²/l per coat on softwood and 16 m²/l on hardwood
- Touch dry: 5 hours
- Recoating: After 24 hours
- VOC content: Up to 399 g/l
- Specific gravity: 0.92 ± 0.02 g/cm³
- Storage temperature: 5°C to 40°C
- Quantity: 180 ml
- Type
- Impregnation Varnish
- Surface Material
- of Wood
- Glossiness
- Gloss
- Insecticide / Antifungal
- No
- Diluting Agent
- Solvent Based
- Polyurethane
- No
- 2-Component
- No
- Quantity
- 0.18 lt
- Colour
- Colorless
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.