The lighting installation is of the florie type and includes 1200 warm white LEDs with a length of 50 meters, using transparent cables made from durable plastic in freezing conditions, and the electrical wires are made of copper. The illuminated surface has a total length of 50 meters. The extension cord is 6.5 meters long. It offers the ability to hang the garland so that the power cord can be hidden when plugged into the socket. The product consists of a 50-meter light installation, a transformer, and a power cord. The light garland uses LED technology, with a total of 1200 LEDs and a power of 9W, featuring a Flash mode. The Christmas florie installation has a flash and can be used for both indoor and outdoor decorations, equipped with IP65 protection (moisture-resistant and freeze-proof material that protects against the entry of foreign objects with a diameter of 1 mm and larger). CE - The product is certified according to European standards regarding safety and health as well as environmental protection. The florie sizes are variable, alternating: 20 cm, 30 cm, and 50 cm (they require unrolling as they are tightly packed in the box). The Christmas installation has a semi-grounded regulator that withstands the test of time and allows for the connection of up to 5400 LEDs for installations supporting interconnection. The connector tip is 5 cm in size. The transformer includes a memory chip, socket, plastic casing, and connector tip. The plug transformer is made from moisture/freeze-resistant plastic according to IP65 standard. The source can be connected to the socket. The recommended input voltage is 220V, while the output voltage is 31V. The output power is 9W - 50Hz with a current of 0.2A. The interconnection capability refers to the ability to expand a lighting installation using supplementary segments. Each segment has interconnection ends that can be connected to create a composite installation for a larger area. Thus, a large number of lighting installations can be used connected through a single power cord (of the first segment) to the electrical network. The installation can be used both indoors and outdoors.