Skroutz.mt

AWTools Pump Pump Well 0.73hp
Submersible Water Pumps

AWTools Pump Pump Well 0.73hp

Water pump with durable and corrosion-resistant exterior construction made of stainless steel.

The motor is hermetically sealed and protected from overheating. It features a built-in special valve and...

Water pump with durable and corrosion-resistant exterior construction made of stainless steel.

The motor is hermetically sealed and protected from overheating. It features a built-in special valve and connection box for remote control. The long 20-meter power cable allows easy movement of the pump.

Designed for pumping clean water from deep wells, tanks,...

See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    50

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
Review the product
Product report

Description

Description

Water pump with durable and corrosion-resistant exterior construction made of stainless steel.

The motor is hermetically sealed and protected from overheating. It features a built-in special valve and connection box for remote control. The long 20-meter power cable allows easy movement of the pump.

Designed for pumping clean water from deep wells, tanks, channels, rivers, etc. Ideal for gardening tasks, such as watering plants or filling pools, and also to serve as a water supply source for single-family homes.

  • Model: SDM
  • Capacity: 550W, 0.55KW, 0.75 HP
  • Voltage: 220V-240V~50 Hz
  • Maximum water temperature: 35°C
  • Maximum flow: 90 l/h
  • Revolutions per minute: 2860 rev/min
  • Maximum lift height: 50 m
  • Maximum submersion depth: 80 m
  • Minimum well diameter: 100 mm/4"
  • Maximum particle size: 0.5 mm
  • Connection diameter: 5/4"
  • Protection class: IPX8
  • On/Off level: 10 m/2 m
  • Total height: 82 cm
  • Pump diameter: 9.5 cm
  • Weight: 15 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Horsepower
0.73 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
547.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
20 m
Motor Rotation Speed
2860 rpm

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
5/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
50 m

Maximum Head Height: 50


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
80 m
Maximum Particle Size
0.5 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Water pump with durable and corrosion-resistant exterior construction made of stainless steel.

The motor is hermetically sealed and protected from overheating. It features a built-in special valve and connection box for remote control. The long 20-meter power cable allows easy movement of the pump.

Designed for pumping clean water from deep wells, tanks, channels, rivers, etc. Ideal for gardening tasks, such as watering plants or filling pools, and also to serve as a water supply source for single-family homes.

  • Model: SDM
  • Capacity: 550W, 0.55KW, 0.75 HP
  • Voltage: 220V-240V~50 Hz
  • Maximum water temperature: 35°C
  • Maximum flow: 90 l/h
  • Revolutions per minute: 2860 rev/min
  • Maximum lift height: 50 m
  • Maximum submersion depth: 80 m
  • Minimum well diameter: 100 mm/4"
  • Maximum particle size: 0.5 mm
  • Connection diameter: 5/4"
  • Protection class: IPX8
  • On/Off level: 10 m/2 m
  • Total height: 82 cm
  • Pump diameter: 9.5 cm
  • Weight: 15 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Horsepower
0.73 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
547.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
20 m
Motor Rotation Speed
2860 rpm

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
5/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
50 m

Maximum Head Height: 50


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
80 m
Maximum Particle Size
0.5 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

180,11 €
53,00 €   shipping cost