Skroutz.mt

HJC I20 Thorn Motorcycle Helmet Modular ECE 22.06 with Sun Visor
Motorcycle Helmets

HJC I20 Thorn Motorcycle Helmet Modular ECE 22.06 with Sun Visor Code: 18657506-511

HJC MODULAR i20 THORN MC5SF ECE 22.06 Helmet

  • Black visor (Smoke)
  • Modern composition of advanced polycarbonate material
  • Available in sizes 3XS - 2XL

HJC MODULAR i20 THORN MC5SF ECE 22.06 Helmet

  • Black visor (Smoke)
  • Modern composition of advanced polycarbonate material
  • Available in sizes 3XS - 2XL

  • Type

    Modular

    Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

HJC MODULAR i20 THORN MC5SF ECE 22.06 Helmet

  • Black visor (Smoke)
  • Modern composition of advanced polycarbonate material
  • Available in sizes 3XS - 2XL

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
18657506-511

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Colour
Black
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Glasses Holder
Yes
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

HJC MODULAR i20 THORN MC5SF ECE 22.06 Helmet

  • Black visor (Smoke)
  • Modern composition of advanced polycarbonate material
  • Available in sizes 3XS - 2XL

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
18657506-511

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Colour
Black
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Glasses Holder
Yes
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.