Skroutz.mt

Wurth Demolition Hammer Electric 1500W with Chuck SDS Max 07025711
Rotary Hammers

Wurth Demolition Hammer Electric 1500W with Chuck SDS Max 07025711

Key features:

  • Maximum Motor Speed: 1890rpm
  • Impact Energy: 16.8Joule
  • Power: 1500W
See full description
  • Item Excavator

  • Impact Energy

    The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

    2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.

    16.8

    Tools with at least 5 Joules are recommended for heavy duty work and professional use.

  • Power

    Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

    2. Impact Energy is another characteristic that shows the "power" of the tool.

    1500

    Machines ranging from 650 to 1500 watts will handle most household tasks. More watts make it easier to work on harder surfaces.

  • Socket

    SDS Max (TE-Y)

    SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They also allow for easy change of drill bits, which can be done with one hand. 2. SDS-Max (TE-Y) sockets have a base diameter of 18 mm and can accept drill bits with diameters between 13-40 mm. These sockets are only compatible with corresponding SDS Max drill bits.
  • See all
Review the product
Product report

Description

Description

Please provide the description you would like to have translated.

At a glance

Electric rotary hammer by Wurth with a power of 1500Watt and a cable length of 4m. It also features an SDS Max (TE-Y) chuck for better performance in rotary hammering operations compared to others (recommended for work on concrete or stone) and easy drill bit changes that can be done even with one hand.

Features & Functions

  • Long lifespan: Specially hardened tool chuck, optimized dust seal, and high-performance motor with large power reserve.
  • High removal rate: Approximately 490 kg of concrete in 60 minutes.
  • Joint protection: Ergonomic handle with vibration damping
  • Stepless impact rate adjustment: Electronic control circuits allow stepless adjustment of the impact rate, even under load.
  • Constant impact rate and constant impact force: Constant electronic functions
  • Carbon brush replacement indicator: The warning light indicates that the carbon brushes need to be replaced after approximately 8 hours of work.
  • Automatic carbon brush cut-off: This prevents motor damage due to carbon brush wear
  • Work with minimal fatigue: The 12 lockable chisel settings allow adaptation to any working angle.
  • Maximum electrical safety: Full insulation
  • Easy tool start: Due to the automatic chuck, the tool just needs to be started and then locks via rotation.
  • Ease of use: Large sliding on-off switch

Specifications

  • Rated voltage: 230 V/AC
  • Frequency: 50 Hz
  • Protection class: Protection class II/protective insulation
  • Power input: 1500 W
  • Power output: 950 W
  • Min./Max. impact rate: 900-1890 U/min(rpm)
  • Tool holder: Suitable for SDS-max
  • Max. impact energy: 16.8 J
  • Impact energy: 16.8 J
  • Removal performance: 490 kg/h
  • Length x height: 570 x 270 mm
  • Adjustable chisel position: 12-fold, 30°
  • Machine weight: 10.1 kg
  • Cable length: 4 m

Includes

  • Flat chisel with SDS-max connection socket
  • Handle
  • Maintenance spray MAINTSPR-CONCENTRATE-100ML
  • Empty toolbox for hammer MH 10-SE

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Power Source
Electric
Type
Excavator

Battery Specifications

Lithium
No

Current Specifications

Power
1500 W

Power: 1500

Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

2. Impact Energy is another characteristic that shows the "power" of the tool.


Machines ranging from 650 to 1500 watts will handle most household tasks. More watts make it easier to work on harder surfaces.
Cable Length
4 m

Features

Maximum Motor Speed
1890 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
16.8 Joule

Impact Energy: 16.8

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


Tools with at least 5 Joules are recommended for heavy duty work and professional use.
Jam Protection
No
Socket
SDS Max (TE-Y)

Socket

SDS Max (TE-Y)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They also allow for easy change of drill bits, which can be done with one hand. 2. SDS-Max (TE-Y) sockets have a base diameter of 18 mm and can accept drill bits with diameters between 13-40 mm. These sockets are only compatible with corresponding SDS Max drill bits.
Brushless
No
Pneumatic
No
Speed Adjustable
No
Impact
No
Rotary
No
Screwing/Unscrewing
No

Additional Features

Carrying Case
Hard Case
Handle included
Yes
Integrated Light
No
Guide
No
Net Weight
10100 gr

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Please provide the description you would like to have translated.

At a glance

Electric rotary hammer by Wurth with a power of 1500Watt and a cable length of 4m. It also features an SDS Max (TE-Y) chuck for better performance in rotary hammering operations compared to others (recommended for work on concrete or stone) and easy drill bit changes that can be done even with one hand.

Features & Functions

  • Long lifespan: Specially hardened tool chuck, optimized dust seal, and high-performance motor with large power reserve.
  • High removal rate: Approximately 490 kg of concrete in 60 minutes.
  • Joint protection: Ergonomic handle with vibration damping
  • Stepless impact rate adjustment: Electronic control circuits allow stepless adjustment of the impact rate, even under load.
  • Constant impact rate and constant impact force: Constant electronic functions
  • Carbon brush replacement indicator: The warning light indicates that the carbon brushes need to be replaced after approximately 8 hours of work.
  • Automatic carbon brush cut-off: This prevents motor damage due to carbon brush wear
  • Work with minimal fatigue: The 12 lockable chisel settings allow adaptation to any working angle.
  • Maximum electrical safety: Full insulation
  • Easy tool start: Due to the automatic chuck, the tool just needs to be started and then locks via rotation.
  • Ease of use: Large sliding on-off switch

Specifications

  • Rated voltage: 230 V/AC
  • Frequency: 50 Hz
  • Protection class: Protection class II/protective insulation
  • Power input: 1500 W
  • Power output: 950 W
  • Min./Max. impact rate: 900-1890 U/min(rpm)
  • Tool holder: Suitable for SDS-max
  • Max. impact energy: 16.8 J
  • Impact energy: 16.8 J
  • Removal performance: 490 kg/h
  • Length x height: 570 x 270 mm
  • Adjustable chisel position: 12-fold, 30°
  • Machine weight: 10.1 kg
  • Cable length: 4 m

Includes

  • Flat chisel with SDS-max connection socket
  • Handle
  • Maintenance spray MAINTSPR-CONCENTRATE-100ML
  • Empty toolbox for hammer MH 10-SE

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Power Source
Electric
Type
Excavator

Battery Specifications

Lithium
No

Current Specifications

Power
1500 W

Power: 1500

Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

2. Impact Energy is another characteristic that shows the "power" of the tool.


Machines ranging from 650 to 1500 watts will handle most household tasks. More watts make it easier to work on harder surfaces.
Cable Length
4 m

Features

Maximum Motor Speed
1890 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
16.8 Joule

Impact Energy: 16.8

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


Tools with at least 5 Joules are recommended for heavy duty work and professional use.
Jam Protection
No
Socket
SDS Max (TE-Y)

Socket

SDS Max (TE-Y)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They also allow for easy change of drill bits, which can be done with one hand. 2. SDS-Max (TE-Y) sockets have a base diameter of 18 mm and can accept drill bits with diameters between 13-40 mm. These sockets are only compatible with corresponding SDS Max drill bits.
Brushless
No
Pneumatic
No
Speed Adjustable
No
Impact
No
Rotary
No
Screwing/Unscrewing
No

Additional Features

Carrying Case
Hard Case
Handle included
Yes
Integrated Light
No
Guide
No
Net Weight
10100 gr

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

1.275,00 €
41,00 €   shipping cost