Skroutz.mt

Kappa Moto Matt Titanium Motorcycle Helmet Modular ECE 22.06
Motorcycle Helmets

Kappa Moto Matt Titanium Motorcycle Helmet Modular ECE 22.06 Code: HKKV50BG

This motorcycle helmet is made from thermoplastic material, offering durability and lightweight design for comfortable use. It features a modular design, allowing for easy transition from a full face...

This motorcycle helmet is made from thermoplastic material, offering durability and lightweight design for comfortable use. It features a modular design, allowing for easy transition from a full face to an open face helmet depending on your needs. Its color is gray, providing a sleek and understated appearance.

The inner lining is removable and washable,...

See full description See full description

  • Type

    Modular

    Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Ready
  • Color Finish Matt
  • See all

Size

Size

International
Review the product
Product report

Description

Description

This motorcycle helmet is made from thermoplastic material, offering durability and lightweight design for comfortable use. It features a modular design, allowing for easy transition from a full face to an open face helmet depending on your needs. Its color is gray, providing a sleek and understated appearance.

The inner lining is removable and washable, making cleaning and maintenance easy. The Microlock fastening mechanism ensures a secure fit, while the ECE 22.06 certification guarantees the safety and quality of the product according to official standards.

Notably, the helmet is Pinlock ready, offering the option to add an anti-fog insert, helping you maintain visibility in all conditions. However, it does not feature Bluetooth for communication, focusing solely on the rider's safety.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
HKKV50BG

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Colour
Grey
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Ready

Pinlock (Anti-fog Film)

Ready

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

This motorcycle helmet is made from thermoplastic material, offering durability and lightweight design for comfortable use. It features a modular design, allowing for easy transition from a full face to an open face helmet depending on your needs. Its color is gray, providing a sleek and understated appearance.

The inner lining is removable and washable, making cleaning and maintenance easy. The Microlock fastening mechanism ensures a secure fit, while the ECE 22.06 certification guarantees the safety and quality of the product according to official standards.

Notably, the helmet is Pinlock ready, offering the option to add an anti-fog insert, helping you maintain visibility in all conditions. However, it does not feature Bluetooth for communication, focusing solely on the rider's safety.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
HKKV50BG

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Colour
Grey
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Ready

Pinlock (Anti-fog Film)

Ready

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

127,98 €
17,00 €   shipping cost