Skroutz.mt

BeSafe Izi Go Modular X2 Baby Car Seat i-Size Sea Green Melange 0-13 kg
Baby Car Seats

BeSafe Izi Go Modular X2 Baby Car Seat i-Size Sea Green Melange 0-13 kg Code: 2001-11032563-SGM

The BeSafe iZi Go Modular X2 i-Size is designed for the ultimate safety and comfort of your child. It fits onto the base just like its predecessor.

  • Child height: 40-75 cm
  • Age: Suitable from newborn...

The BeSafe iZi Go Modular X2 i-Size is designed for the ultimate safety and comfort of your child. It fits onto the base just like its predecessor.

  • Child height: 40-75 cm
  • Age: Suitable from newborn to 12 months
  • Direction: Rear-facing seat
  • Installation: 3-point car seat belt or with ISOfix base (sold separately)
  • NEW advanced head area protection with the...
See full description See full description

  • Orientation

    This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

    Rear

    The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.

  • Suitable for Weight

    0-13 kg

    From 0 to 15 months, with rear-facing orientation and the child lying at a 30-45 degree angle.
  • Suitable for Height 40-75 cm
  • See all
Review the product
Product report

Description

Description

The BeSafe iZi Go Modular X2 i-Size is designed for the ultimate safety and comfort of your child. It fits onto the base just like its predecessor.

  • Child height: 40-75 cm
  • Age: Suitable from newborn to 12 months
  • Direction: Rear-facing seat
  • Installation: 3-point car seat belt or with ISOfix base (sold separately)
  • NEW advanced head area protection with the Dynamic Force Absorber system
  • Additional Side Impact Protection (SIP+) that absorbs up to 20% of shocks
  • 5-point harness for extra stability in side impacts
  • Wide straps and padding for greater safety
  • Certified according to UN R129 (i-Size) regulations
  • Increased comfort, especially for babies
  • NEW soft Newborn Hugger for stability and proper incline for newborns
  • NEW design in the head area with more interior space
  • High-quality materials
  • Internal straps and headrest that easily adjust
  • Flexible canopy with UPF50+
  • Easily attaches with one click onto the base
  • Magnetic helpers on the straps for easy entry and exit of the baby
  • One of the lightest i-Size seats on the market
  • Ergonomic shape for easy carrying
  • Fits most strollers on the market
  • Two uninstall options from the stroller
  • Removable and machine-washable cover

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
2001-11032563-SGM

General Information

Type
Egg

Type

Egg

Designed exclusively for infants, with rear-facing only installation for head and back safety. Essential for the maternity hospital and use during the first months.
Facing
Rear

Facing

This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

Rear

The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
Colour
Grey

Age group

Weight Group
0-13 kg

Weight Group

0-13 kg

From 0 to 15 months, with rear-facing orientation and the child lying at a 30-45 degree angle.
Child Height
40-75 cm

Details

Manufacturer Colour
Sea Green Melange
Recline
No

Recline

The seat is properly adjusted to have a tilt. The recline helps prevent the child's head from leaning forward when sleeping.

Some models allow for adjustment of the recline when the child is already seated, while others require adjustment before placing the child in the seat.

It is not recommended for newborns as babies should not be lifted more than 30 degrees due to the potential risk of musculoskeletal problems.
Swivel
No

Swivel

The seat has the ability to make a full rotation (360 degrees) for a change of orientation and immediate access to the child.

2. The rotation capability offers comfort and flexibility to the parent as they have easy access to any orientation the seat has.
Top Tether
No

Top Tether

It is an additional restraint strap located on the top or back of the seat, which holds it in place and reduces forward movement of the seat during a frontal collision, providing additional safety in case of an accident.
With Removable Covers
Yes
with Base
No

Technical Specifications

ADAC Test
Not Available

ADAC Test

ADAC is a company that conducts crash tests and evaluates car seats for safety, ergonomics, functionality, and the presence of harmful substances.
Swedish Plus Test
No

Swedish Plus Test

Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
i-Size
Yes

i-Size

These are new generation seats that offer additional safety in case of side collision.


i-Size seats are designed according to the height, not the weight of the child, allowing them to travel rear-facing for a longer period of time.


i-Size seats do not replace weight-based car seats but offer an additional option. They are recommended for both newborns and older children.
Side Collision Protection
Yes

Side Collision Protection

An integrated system on the side of the seat that reduces the impact force of a side collision, protecting the child from serious injury.

Installation

ISOfix
No

ISOfix

It is a system for safely installing a child seat. To apply it, it is necessary for the rear seats of the car to have the corresponding metal receptacles, but all modern cars have them.

2. The isofix system is easier to install compared to seats that do not have it. The seat clicks into the car's receptacles and thus reduces the movement of the seat towards the front in the event of a collision.

3. Most seats that apply to all ages have the isofix system.
Seatbelt
No

Seatbelt

The car seat can be installed in the car using the vehicle's seat belt.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The BeSafe iZi Go Modular X2 i-Size is designed for the ultimate safety and comfort of your child. It fits onto the base just like its predecessor.

  • Child height: 40-75 cm
  • Age: Suitable from newborn to 12 months
  • Direction: Rear-facing seat
  • Installation: 3-point car seat belt or with ISOfix base (sold separately)
  • NEW advanced head area protection with the Dynamic Force Absorber system
  • Additional Side Impact Protection (SIP+) that absorbs up to 20% of shocks
  • 5-point harness for extra stability in side impacts
  • Wide straps and padding for greater safety
  • Certified according to UN R129 (i-Size) regulations
  • Increased comfort, especially for babies
  • NEW soft Newborn Hugger for stability and proper incline for newborns
  • NEW design in the head area with more interior space
  • High-quality materials
  • Internal straps and headrest that easily adjust
  • Flexible canopy with UPF50+
  • Easily attaches with one click onto the base
  • Magnetic helpers on the straps for easy entry and exit of the baby
  • One of the lightest i-Size seats on the market
  • Ergonomic shape for easy carrying
  • Fits most strollers on the market
  • Two uninstall options from the stroller
  • Removable and machine-washable cover

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
2001-11032563-SGM

General Information

Type
Egg

Type

Egg

Designed exclusively for infants, with rear-facing only installation for head and back safety. Essential for the maternity hospital and use during the first months.
Facing
Rear

Facing

This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

Rear

The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
Colour
Grey

Age group

Weight Group
0-13 kg

Weight Group

0-13 kg

From 0 to 15 months, with rear-facing orientation and the child lying at a 30-45 degree angle.
Child Height
40-75 cm

Details

Manufacturer Colour
Sea Green Melange
Recline
No

Recline

The seat is properly adjusted to have a tilt. The recline helps prevent the child's head from leaning forward when sleeping.

Some models allow for adjustment of the recline when the child is already seated, while others require adjustment before placing the child in the seat.

It is not recommended for newborns as babies should not be lifted more than 30 degrees due to the potential risk of musculoskeletal problems.
Swivel
No

Swivel

The seat has the ability to make a full rotation (360 degrees) for a change of orientation and immediate access to the child.

2. The rotation capability offers comfort and flexibility to the parent as they have easy access to any orientation the seat has.
Top Tether
No

Top Tether

It is an additional restraint strap located on the top or back of the seat, which holds it in place and reduces forward movement of the seat during a frontal collision, providing additional safety in case of an accident.
With Removable Covers
Yes
with Base
No

Technical Specifications

ADAC Test
Not Available

ADAC Test

ADAC is a company that conducts crash tests and evaluates car seats for safety, ergonomics, functionality, and the presence of harmful substances.
Swedish Plus Test
No

Swedish Plus Test

Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
i-Size
Yes

i-Size

These are new generation seats that offer additional safety in case of side collision.


i-Size seats are designed according to the height, not the weight of the child, allowing them to travel rear-facing for a longer period of time.


i-Size seats do not replace weight-based car seats but offer an additional option. They are recommended for both newborns and older children.
Side Collision Protection
Yes

Side Collision Protection

An integrated system on the side of the seat that reduces the impact force of a side collision, protecting the child from serious injury.

Installation

ISOfix
No

ISOfix

It is a system for safely installing a child seat. To apply it, it is necessary for the rear seats of the car to have the corresponding metal receptacles, but all modern cars have them.

2. The isofix system is easier to install compared to seats that do not have it. The seat clicks into the car's receptacles and thus reduces the movement of the seat towards the front in the event of a collision.

3. Most seats that apply to all ages have the isofix system.
Seatbelt
No

Seatbelt

The car seat can be installed in the car using the vehicle's seat belt.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

238,90 €
68,00 €   shipping cost