Wheel repair and painting kit. The kit contains high-quality products from AVEX.

The kit is DIY and can be used by anyone following the instructions included in the packaging.

• 2 x 400 ml Champion spray paint
• 1 x 500 ml Champion varnish spray
• 1 x special filler material for aluminum wheels
• 1 x set of disposable gloves
• 1 x set of sandpaper of various grits for surface correction
• 1 x roll of tape for profile filtering on the wheel

Application Instructions:

• Carefully clean the wheels from dust or grease.
• Fix the dents in the wheels for correction.
• Clean again or remove any metallic residues.
• Apply tape around the wheel for protection during painting.
• Apply the filler material with a spatula or with your fingers (use gloves).
• After 10 minutes, finish the surface with fine sandpaper.
• Repeat the process if more interventions are needed.
• Clean the surface from residues after sanding.
• Shake the paint and apply evenly to the wheel.
• After 10-20 minutes, you can apply a second coat.
• Finish with varnish if desired.
• Applying varnish is optional for a glossy finish.