Skroutz.mt

Wi-Tek WI-AP218AX V2 Access Point Wi‑Fi 6 Dual Band (2.4 & 5GHz) Single Kit
Access Points

Wi-Tek WI-AP218AX V2 Access Point Wi‑Fi 6 Dual Band (2.4 & 5GHz) Single Kit

Wi-Fi 6 (802.11ax): Offers a total speed of up to 1775Mbps, ensuring a smooth user experience for demanding applications.

Cloud Management: Supports remote management, allowing easy monitoring and...

Wi-Fi 6 (802.11ax): Offers a total speed of up to 1775Mbps, ensuring a smooth user experience for demanding applications.

Cloud Management: Supports remote management, allowing easy monitoring and maintenance of the network.

VLAN Support: Allows isolation of SSIDs via IEEE 802.1Q VLAN, enhancing security.

  • Supports advanced technologies MU-MIMO and OFDMA.
  • ...
See full description See full description

Top specs

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Dual Band (2.4 & 5GHz)

    They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.

  • Wi-Fi Generation

    Wi‑Fi 6

    The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

    Ideal for homes with many smart devices.

    Compatible with all previous generations.
  • See all
131 60 €
Delivery Mon, 07 Sep - Wed, 09 Sep
14,00 €   shipping cost
Sent from Greece
From Magnet Market
Greece
2 pieces
See Networking on the page of Magnet Market

Learn more about invoicing
Review the product
Product report

Description

Description

Wi-Fi 6 (802.11ax): Offers a total speed of up to 1775Mbps, ensuring a smooth user experience for demanding applications.

Cloud Management: Supports remote management, allowing easy monitoring and maintenance of the network.

VLAN Support: Allows isolation of SSIDs via IEEE 802.1Q VLAN, enhancing security.

  • Supports advanced technologies MU-MIMO and OFDMA.
  • Fast Roaming: Automatic handoff of connection between APs for uninterrupted connectivity.
  • High Durability: Allows automatic channel adjustment and power for optimal performance in high-traffic environments.

Technical Specifications:

  • Speed: 2.4GHz up to 574Mbps, 5GHz up to 1201Mbps
  • RAM: 512 MB
  • Antenna dBi: 2.4GHz: 3dBi, 5GHz: 3dBi
  • Connections: 2x Gigabit Ethernet (WAN with PoE 802.3at)
  • Wireless Modes: Fit AP Mode, Repeater, Wireless Router, WISP Mode
  • VLAN Support: Yes (IEEE 802.1Q VLAN, SSID-to-VLAN mapping)
  • SSID: Up to 8 per frequency
  • Wi-Fi Standards: IEEE 802.11a/b/g/n/ac/ax
  • Security Level: WPA2-Enterprise, WPA3-Mixed, SSID isolation
  • Certifications: CE, FCC, RoHS, UKCA, RCM
  • Dimensions: 206 x 206 x 41mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
1775 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11 b/g/n, 802.11a, 802.11ac, 802.11ax
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
3 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Ethernet Ports
2

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Wi-Fi 6 (802.11ax): Offers a total speed of up to 1775Mbps, ensuring a smooth user experience for demanding applications.

Cloud Management: Supports remote management, allowing easy monitoring and maintenance of the network.

VLAN Support: Allows isolation of SSIDs via IEEE 802.1Q VLAN, enhancing security.

  • Supports advanced technologies MU-MIMO and OFDMA.
  • Fast Roaming: Automatic handoff of connection between APs for uninterrupted connectivity.
  • High Durability: Allows automatic channel adjustment and power for optimal performance in high-traffic environments.

Technical Specifications:

  • Speed: 2.4GHz up to 574Mbps, 5GHz up to 1201Mbps
  • RAM: 512 MB
  • Antenna dBi: 2.4GHz: 3dBi, 5GHz: 3dBi
  • Connections: 2x Gigabit Ethernet (WAN with PoE 802.3at)
  • Wireless Modes: Fit AP Mode, Repeater, Wireless Router, WISP Mode
  • VLAN Support: Yes (IEEE 802.1Q VLAN, SSID-to-VLAN mapping)
  • SSID: Up to 8 per frequency
  • Wi-Fi Standards: IEEE 802.11a/b/g/n/ac/ax
  • Security Level: WPA2-Enterprise, WPA3-Mixed, SSID isolation
  • Certifications: CE, FCC, RoHS, UKCA, RCM
  • Dimensions: 206 x 206 x 41mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
1775 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11 b/g/n, 802.11a, 802.11ac, 802.11ax
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
3 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Ethernet Ports
2

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

131,60 €
14,00 €   shipping cost