3D Printer Filament

Esun ASA+ 1.75mm Cold White 1kg 1τμχ (Spool) 3D Printer Filament Code: ASA+P175CW1

eSun ASA+ filament is suitable for printing outdoor parts and functional prototypes that need resistance to UV radiation and weather conditions. The material offers good mechanical strength, high...

eSun ASA+ filament is suitable for printing outdoor parts and functional prototypes that need resistance to UV radiation and weather conditions. The material offers good mechanical strength, high rigidity, and impact resistance, with properties similar to ABS and enhanced weather resistance.

Consistent dimensional tolerance, limited warping, good layer...

See full description See full description

Top specs

  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
21 99 €
Delivery by Wed, 25 Nov
14,00 €   shipping cost
Sent from Greece
From THES3D
Greece
4 pieces
See Printer Supplies on the page of THES3D

Learn more about invoicing

Description

Description

eSun ASA+ filament is suitable for printing outdoor parts and functional prototypes that need resistance to UV radiation and weather conditions. The material offers good mechanical strength, high rigidity, and impact resistance, with properties similar to ABS and enhanced weather resistance.

Consistent dimensional tolerance, limited warping, good layer adhesion, and reduced stringing help produce accurate prints with a smooth surface. The filament is wound on a spool and vacuum-sealed with a desiccant packet.

  • Material: ASA
  • Color: Cool white
  • Diameter: 1.75 mm
  • Weight: 1 kg
  • Packaging: Spool
  • Resistance: UV radiation, weather conditions, and impact
  • Warping: Limited
  • Layer adhesion: Good
  • Storage packaging: Vacuum-sealed with a desiccant packet

Manufacturer

See full description

Specifications

Specifications

Product Number
ASA+P175CW1
Material
ASA
Colour
White
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

  1. 5 stars
    0
  2. 4 stars
    0
  3. 2
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • DiavlosGroup

    Verified purchase

    Although the filament remained in a Dryer Box for 8 hours before printing, the print quality was unacceptable. The most serious problem, however, was the poor winding of the filament on the spools. In several cases, the filament was tangled, causing it to jam during printing. This happened twice, ruining large prints that had taken many hours, with a significant loss of time and material. Low print quality is one problem, but ruining prints that take many hours because of poor winding is completely unacceptable. This applies only to the ASA material; I had no issues with the PLA from the same company.

    Translated from Greek ·
    Did you find this review helpful?
  • irinikirko

    Verified purchase

    This stuff has bad bed adhesion. (Centauri Carbon)
    My go to ASA was Verbatim which never gave me any issues. Unfortunately I cannot find that anymore on Skroutz.

    Translated from Greek ·
    Did you find this review helpful?
  • Although the filament remained in a Dryer Box for 8 hours before printing, the print quality was unacceptable. The most serious problem, however, was the poor winding of the filament on the spools. In several cases, the filament was tangled, causing it to jam during printing. This happened twice, ruining large prints that had taken many hours, with a significant loss of time and material. Low print quality is one problem, but ruining prints that take many hours because of poor winding is completely unacceptable. This applies only to the ASA material; I had no issues with the PLA from the same company.

    Translated from Greek ·
    0
  • This stuff has bad bed adhesion. (Centauri Carbon)
    My go to ASA was Verbatim which never gave me any issues. Unfortunately I cannot find that anymore on Skroutz.

    Translated from Greek ·
    0
  • See all

Description & Specifications

eSun ASA+ filament is suitable for printing outdoor parts and functional prototypes that need resistance to UV radiation and weather conditions. The material offers good mechanical strength, high rigidity, and impact resistance, with properties similar to ABS and enhanced weather resistance.

Consistent dimensional tolerance, limited warping, good layer adhesion, and reduced stringing help produce accurate prints with a smooth surface. The filament is wound on a spool and vacuum-sealed with a desiccant packet.

  • Material: ASA
  • Color: Cool white
  • Diameter: 1.75 mm
  • Weight: 1 kg
  • Packaging: Spool
  • Resistance: UV radiation, weather conditions, and impact
  • Warping: Limited
  • Layer adhesion: Good
  • Storage packaging: Vacuum-sealed with a desiccant packet

Manufacturer

Product Number
ASA+P175CW1
Material
ASA
Colour
White
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

  1. 5 stars
    0
  2. 4 stars
    0
  3. 2
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • DiavlosGroup

    Verified purchase

    Although the filament remained in a Dryer Box for 8 hours before printing, the print quality was unacceptable. The most serious problem, however, was the poor winding of the filament on the spools. In several cases, the filament was tangled, causing it to jam during printing. This happened twice, ruining large prints that had taken many hours, with a significant loss of time and material. Low print quality is one problem, but ruining prints that take many hours because of poor winding is completely unacceptable. This applies only to the ASA material; I had no issues with the PLA from the same company.

    Translated from Greek ·
    Did you find this review helpful?
  • irinikirko

    Verified purchase

    This stuff has bad bed adhesion. (Centauri Carbon)
    My go to ASA was Verbatim which never gave me any issues. Unfortunately I cannot find that anymore on Skroutz.

    Translated from Greek ·
    Did you find this review helpful?
  • Although the filament remained in a Dryer Box for 8 hours before printing, the print quality was unacceptable. The most serious problem, however, was the poor winding of the filament on the spools. In several cases, the filament was tangled, causing it to jam during printing. This happened twice, ruining large prints that had taken many hours, with a significant loss of time and material. Low print quality is one problem, but ruining prints that take many hours because of poor winding is completely unacceptable. This applies only to the ASA material; I had no issues with the PLA from the same company.

    Translated from Greek ·
    0
  • This stuff has bad bed adhesion. (Centauri Carbon)
    My go to ASA was Verbatim which never gave me any issues. Unfortunately I cannot find that anymore on Skroutz.

    Translated from Greek ·
    0
  • See all
21,99 €
14,00 €   shipping cost