Skroutz.mt

Gasoline Pump 1" Suction 2-stroke Engine 7 M Suction Depth 8000 Lt Min
Surface Water Pumps

Gasoline Pump 1" Suction 2-stroke Engine 7 M Suction Depth 8000 Lt Min

The DDT surface water pump with a two-stroke petrol engine is designed for pumping clean water from wells, lakes and rivers, as well as for irrigation and filling tanks. It has a 1″ connection port...

The DDT surface water pump with a two-stroke petrol engine is designed for pumping clean water from wells, lakes and rivers, as well as for irrigation and filling tanks. It has a 1″ connection port and a suction depth of 7 m, and is started manually using a pull cord. It runs on a petrol and 2T oil mixture at a ratio of 25:1.

It can also be used to pump or...

See full description See full description

Top specs

  • Power Supply

    Gasoline

    Ideal for areas without access to electricity 2. Unaffected by power outages or voltage fluctuations.

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The DDT surface water pump with a two-stroke petrol engine is designed for pumping clean water from wells, lakes and rivers, as well as for irrigation and filling tanks. It has a 1″ connection port and a suction depth of 7 m, and is started manually using a pull cord. It runs on a petrol and 2T oil mixture at a ratio of 25:1.

It can also be used to pump or drain pools, basins and fish farms, as well as to wash animals, stables, tools and agricultural machinery. Before starting, the pump must be filled with water and a filter must be fitted to the end of the suction hose.

  • Fuel: Petrol and 2T oil
  • Engine type: Two-stroke
  • Engine displacement: 42.7 cc
  • Power: 2 hp
  • Engine speed: 6,500 rpm
  • Cooling system: Forced air cooling
  • Fuel tank capacity: 1.2 L
  • Suction depth: 7 m
  • Flow rate: 8 m³/h
  • Total head: 35 m
  • Pressure: 2 bar
  • Suction and outlet port diameter: 1″
  • Sound power level: 103 dB(A)
  • Guaranteed sound power level: 106 dB(A)
  • Sound pressure level at the operator's position: 92 dB(A)
  • Package contents: 1 water pump, 3 clamps, 2 connectors, 1 mesh filter, 1 mixing container and 1 assembly and maintenance kit

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Power Source
Gasoline

Power Source

Gasoline
Ideal for areas without access to electricity 2. Unaffected by power outages or voltage fluctuations.
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Engine Type
Two-Stroke
Horsepower
2 hp
Flow Rate
8 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
35 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
2 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The DDT surface water pump with a two-stroke petrol engine is designed for pumping clean water from wells, lakes and rivers, as well as for irrigation and filling tanks. It has a 1″ connection port and a suction depth of 7 m, and is started manually using a pull cord. It runs on a petrol and 2T oil mixture at a ratio of 25:1.

It can also be used to pump or drain pools, basins and fish farms, as well as to wash animals, stables, tools and agricultural machinery. Before starting, the pump must be filled with water and a filter must be fitted to the end of the suction hose.

  • Fuel: Petrol and 2T oil
  • Engine type: Two-stroke
  • Engine displacement: 42.7 cc
  • Power: 2 hp
  • Engine speed: 6,500 rpm
  • Cooling system: Forced air cooling
  • Fuel tank capacity: 1.2 L
  • Suction depth: 7 m
  • Flow rate: 8 m³/h
  • Total head: 35 m
  • Pressure: 2 bar
  • Suction and outlet port diameter: 1″
  • Sound power level: 103 dB(A)
  • Guaranteed sound power level: 106 dB(A)
  • Sound pressure level at the operator's position: 92 dB(A)
  • Package contents: 1 water pump, 3 clamps, 2 connectors, 1 mesh filter, 1 mixing container and 1 assembly and maintenance kit

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Power Source
Gasoline

Power Source

Gasoline
Ideal for areas without access to electricity 2. Unaffected by power outages or voltage fluctuations.
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Engine Type
Two-Stroke
Horsepower
2 hp
Flow Rate
8 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
35 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
2 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.