Skroutz.mt

Milwaukee ONEFHIWF1D -121C Impact Wrench Battery 18V 1x12Ah with Socket 1"
Impact Wrenches

Milwaukee ONEFHIWF1D -121C Impact Wrench Battery 18V 1x12Ah with Socket 1"

Key features:

  • Voltage: 18V​
  • Number of Batteries: 1x12Ah
  • Maximum Torque: 2576Nm
See full description

Top specs

  • Volt

    Battery/tool voltage

  • Speed Setting

    Allows adjustment of the rotation speed according to the material and task, for precision and control.

  • Maximum Torque

    The rotational force that the tool can apply. Higher torque → ability to tighten without slipping.

  • Socket

    The mechanism that holds the tool's tip or bar.

  • Torque Setting

    The greater the torque, the tighter a nut can be fastened or loosened.
  • See all
1399 98 €
Delivery by Fri, 18 Sep
47,00 €   shipping cost
Sent from Greece
From Tripanaki 4.8 (65)
4.8 (65 reviews)
Greece
See Power Tools on the page of Tripanaki

Learn more about invoicing
Review the product
Product report

Description

Description

At a glance

  • The M18 FUEL™ high torque impact wrench with D-Handle has a long 150 mm frame and provides 2576 Nm fastening torque, replacing electric, gasoline, and pneumatic solutions.
  • Delivers up to 2711 Nm breakaway torque allowing loosening of up to M42 bolts
  • The 4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximize application versatility

Features & Functions

  • The integrated impact measurement sensor enhances the consistent repeatability of the selected torque setting
  • ONE-KEY™ tool control allows customization of rechargeable tools for increased productivity and consistent results, as well as tracking and security offered by a cloud-based inventory management platform that supports location tracking and theft prevention
  • The Lug nut mode, when enabled via ONE-KEY™, will automatically shut off the tool when it enters the range of 475 Nm – 610 Nm to prevent over-tightening of the nuts
  • Three LEDs provide high-definition lighting to increase workspace visibility

Specifications

  • Impact rate (ipm) : 750/ 930/ 1200/ 1440
  • Max bolt diameter : M42
  • Max fastening torque (Nm): 2576
  • Max torque (Nm): 1180/ 1254/ 1966/ 2576
  • No load speed (rpm): 600/ 700/ 900/ 1200
  • Loosening torque (Nm): 2711
  • Standard equipment : Side handle
  • Supplied in : Kitbox
  • Tool reception : 1″ square
  • Battery capacity (Ah) : 12.0
  • Battery type : Li-ion
  • Charger included : M12-18 FC
  • Number of batteries supplied : 1
  • Voltage (V): 18
  • Weight with battery (EPTA) (kg): 12.7 (M18 FB12)

Includes

1 x M18 FB12 Battery, M12-18 FC Rapid Charger, Kitbox

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Power Source
Battery
Bit Size
1"

Bit Size

The mechanism that holds the tool's tip or bar.
Weight (with Battery)
12.7 kg

Battery Specifications

Number of Batteries
1
Volt
18 V

Volt

Battery/tool voltage
Ah
12 Ah
Lithium
Yes
Compatible Battery Type
Milwaukee M18

Features & Functions

Maximum Motor Speed
1200 rpm
Speed Setting
Yes

Speed Setting

Allows adjustment of the rotation speed according to the material and task, for precision and control.
Maximum Torque
2576 Nm

Maximum Torque

The rotational force that the tool can apply. Higher torque → ability to tighten without slipping.
Torque Adjustment
Yes

Torque Adjustment

The greater the torque, the tighter a nut can be fastened or loosened.
Maximum Impact Rate
1440 bpm
Brushless
No

Brake Type

Axle Brake
No

Axle Brake

Mechanism that immobilizes the axle as soon as you release the trigger.
Electric Brake
No

Electric Brake

Specific mechanism that reverses the current in the motor the moment you release the trigger. This causes the anvil to stop almost instantly.
Electronic Brake
No

Electronic Brake

Specific mechanism that reverses the current in the motor at the moment you release the trigger, controlled via an electronic board (controller) that manages the motor. The board decides when and how the current will be reversed.

Extras

Carrying Case
Hard Case

Carrying Case

Hard Case

Delivered with a hard case or carrying bag.
Built-In Light
Yes
Kit Contents
1x12Ah with Hard Case

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

At a glance

  • The M18 FUEL™ high torque impact wrench with D-Handle has a long 150 mm frame and provides 2576 Nm fastening torque, replacing electric, gasoline, and pneumatic solutions.
  • Delivers up to 2711 Nm breakaway torque allowing loosening of up to M42 bolts
  • The 4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximize application versatility

Features & Functions

  • The integrated impact measurement sensor enhances the consistent repeatability of the selected torque setting
  • ONE-KEY™ tool control allows customization of rechargeable tools for increased productivity and consistent results, as well as tracking and security offered by a cloud-based inventory management platform that supports location tracking and theft prevention
  • The Lug nut mode, when enabled via ONE-KEY™, will automatically shut off the tool when it enters the range of 475 Nm – 610 Nm to prevent over-tightening of the nuts
  • Three LEDs provide high-definition lighting to increase workspace visibility

Specifications

  • Impact rate (ipm) : 750/ 930/ 1200/ 1440
  • Max bolt diameter : M42
  • Max fastening torque (Nm): 2576
  • Max torque (Nm): 1180/ 1254/ 1966/ 2576
  • No load speed (rpm): 600/ 700/ 900/ 1200
  • Loosening torque (Nm): 2711
  • Standard equipment : Side handle
  • Supplied in : Kitbox
  • Tool reception : 1″ square
  • Battery capacity (Ah) : 12.0
  • Battery type : Li-ion
  • Charger included : M12-18 FC
  • Number of batteries supplied : 1
  • Voltage (V): 18
  • Weight with battery (EPTA) (kg): 12.7 (M18 FB12)

Includes

1 x M18 FB12 Battery, M12-18 FC Rapid Charger, Kitbox

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Power Source
Battery
Bit Size
1"

Bit Size

The mechanism that holds the tool's tip or bar.
Weight (with Battery)
12.7 kg

Battery Specifications

Number of Batteries
1
Volt
18 V

Volt

Battery/tool voltage
Ah
12 Ah
Lithium
Yes
Compatible Battery Type
Milwaukee M18

Features & Functions

Maximum Motor Speed
1200 rpm
Speed Setting
Yes

Speed Setting

Allows adjustment of the rotation speed according to the material and task, for precision and control.
Maximum Torque
2576 Nm

Maximum Torque

The rotational force that the tool can apply. Higher torque → ability to tighten without slipping.
Torque Adjustment
Yes

Torque Adjustment

The greater the torque, the tighter a nut can be fastened or loosened.
Maximum Impact Rate
1440 bpm
Brushless
No

Brake Type

Axle Brake
No

Axle Brake

Mechanism that immobilizes the axle as soon as you release the trigger.
Electric Brake
No

Electric Brake

Specific mechanism that reverses the current in the motor the moment you release the trigger. This causes the anvil to stop almost instantly.
Electronic Brake
No

Electronic Brake

Specific mechanism that reverses the current in the motor at the moment you release the trigger, controlled via an electronic board (controller) that manages the motor. The board decides when and how the current will be reversed.

Extras

Carrying Case
Hard Case

Carrying Case

Hard Case

Delivered with a hard case or carrying bag.
Built-In Light
Yes
Kit Contents
1x12Ah with Hard Case

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

1.399,98 €
47,00 €   shipping cost