Skroutz.mt

Shelly Wave I4 Smart Switch Z-Wave 10A With Neutral
Intermediate Switches

Shelly Wave I4 Smart Switch Z-Wave 10A With Neutral Code: SHELLYQUBINOWAVEI4

The Shelly Wave i4 smart input module controls other Z-Wave devices and automations via connected switches or buttons. It supports up to 4 inputs and, with the Multi-click function, up to 16 actions...

The Shelly Wave i4 smart input module controls other Z-Wave devices and automations via connected switches or buttons. It supports up to 4 inputs and, with the Multi-click function, up to 16 actions or scenes. It does not contain a relay, so it cannot function as a load switch.

It is installed in a flush-mounted box behind an existing switch, without...

See full description See full description

Top specs

  • Connectivity

    Z-Wave

    Reliable wireless connectivity technology with zero interference.

  • Compatible Application

    The compatible app that you download to your mobile phone to control the switch remotely.

  • Maximum Load

    It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

    For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.

  • Wiring

    With Neutral

    For installations where both power cables are present in the switch box on the wall (phase and neutral).

  • Dry Contact

    Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.

  • Power Measurement

    It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.
  • Dimensions 37x42x16mm
  • See all
30 59 €
Delivery by Mon, 09 Nov
14,00 €   shipping cost
Sent from Greece
From Top Electronics 4.9 (38)
4.9 (38 reviews)
Greece
2 pieces
See Sockets & Switches on the page of Top Electronics

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Shelly Wave i4 smart input module controls other Z-Wave devices and automations via connected switches or buttons. It supports up to 4 inputs and, with the Multi-click function, up to 16 actions or scenes. It does not contain a relay, so it cannot function as a load switch.

It is installed in a flush-mounted box behind an existing switch, without requiring its replacement. It supports Z-Wave Plus with mesh topology and Z-Wave Long Range, as well as SmartStart and OTA software updates. Communication is protected with Security 2 Authenticated and AES128 encryption. A compatible Z-Wave Plus gateway is required for setup, while a ZWLR gateway is required for Long Range operation.

  • Type: Smart input module
  • Connectivity: Z-Wave
  • Quantity: 1
  • Wiring: With neutral
  • Maximum load: 10 A
  • Dry contact: Yes
  • Energy monitoring: Yes
  • App: Shelly Smart Control

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
SHELLYQUBINOWAVEI4

Specifications

Switch Type
Smart Switch
Dimensions (Spec Summary)
37x42x16mm

Smart Attributes

Connectivity
Z-Wave

Connectivity

Z-Wave

Reliable wireless connectivity technology with zero interference.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
10 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Wiring
With Neutral

Wiring

With Neutral

For installations where both power cables are present in the switch box on the wall (phase and neutral).
Compatible Application
Shelly Smart Control

Compatible Application

The compatible app that you download to your mobile phone to control the switch remotely.
Pieces
1

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
Yes

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
Yes

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Shelly Wave i4 smart input module controls other Z-Wave devices and automations via connected switches or buttons. It supports up to 4 inputs and, with the Multi-click function, up to 16 actions or scenes. It does not contain a relay, so it cannot function as a load switch.

It is installed in a flush-mounted box behind an existing switch, without requiring its replacement. It supports Z-Wave Plus with mesh topology and Z-Wave Long Range, as well as SmartStart and OTA software updates. Communication is protected with Security 2 Authenticated and AES128 encryption. A compatible Z-Wave Plus gateway is required for setup, while a ZWLR gateway is required for Long Range operation.

  • Type: Smart input module
  • Connectivity: Z-Wave
  • Quantity: 1
  • Wiring: With neutral
  • Maximum load: 10 A
  • Dry contact: Yes
  • Energy monitoring: Yes
  • App: Shelly Smart Control

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
SHELLYQUBINOWAVEI4

Specifications

Switch Type
Smart Switch
Dimensions (Spec Summary)
37x42x16mm

Smart Attributes

Connectivity
Z-Wave

Connectivity

Z-Wave

Reliable wireless connectivity technology with zero interference.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
10 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Wiring
With Neutral

Wiring

With Neutral

For installations where both power cables are present in the switch box on the wall (phase and neutral).
Compatible Application
Shelly Smart Control

Compatible Application

The compatible app that you download to your mobile phone to control the switch remotely.
Pieces
1

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
Yes

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
Yes

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

30,59 €
14,00 €   shipping cost