The Led7 DMX Triac 660W DIN-rail dimmer controls lighting via the DMX512 protocol and features three output channels with trailing-edge technology. It is suitable for triac-powered loads and high-voltage LED lights, and can also operate without a DMX signal, with manual channel selection and brightness adjustment. Dimming ranges from 0% to 100% without flickering, although the minimum level may remain at 10–20% with some lights, depending on their driver.
When there is no DMX signal, the buttons adjust the brightness and select the channel. When an input signal is received, the device displays the DMX address, which can be set from 1 to 510. For best results, use LED drivers compatible with trailing-edge technology.
- Type: DIN-rail dimmer
- Power: 660 W
- Operating voltage: AC 90–240 V
- Frequency: 50–60 Hz
- Standby power consumption: <3 W
- Output channels: 3
- Output type: Relay power supply
- Output current: <1 A per channel
- Output power: <3×110 W at 110 V, <3×220 W at 220 V
- Control signal: DMX512
- Dimming technology: Trailing edge
- Brightness adjustment: 0–100%
- DMX address range: 1–510
- Protection rating: IP20
- Operating temperature: -20°C to 60°C
- Dimensions: 90 × 76 × 61 mm
- Certification: CE
- Type
- Dimmer
- with Remote Control
- No
- Touch
- No
- Wireless
- No
- Placement
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.