Skroutz.mt

DD Audio Car Speaker VO-XN306-S4 8" with 250W RMS (2 Way)
Car Speakers

DD Audio Car Speaker VO-XN306-S4 8" with 250W RMS (2 Way)

The VO-XN300 continues the tradition of blending the latest Hi-Fidelity technology with the properties of high-end Pro Audio to produce a tonally smooth low-distortion frequency response over a wide...

The VO-XN300 continues the tradition of blending the latest Hi-Fidelity technology with the properties of high-end Pro Audio to produce a tonally smooth low-distortion frequency response over a wide bandwidth.

These 6.5-inch combination drivers cover frequencies from 85 Hz to 20 kHz, offering easy system design. They feature a larger Neodymium motor for...

See full description See full description

  • RMS Power

    The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.

  • Resistance

     The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

  • Maximum Power

    The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The VO-XN300 continues the tradition of blending the latest Hi-Fidelity technology with the properties of high-end Pro Audio to produce a tonally smooth low-distortion frequency response over a wide bandwidth.

These 6.5-inch combination drivers cover frequencies from 85 Hz to 20 kHz, offering easy system design. They feature a larger Neodymium motor for greater overall surface area, improved power handling, and output capability. The 4th generation B1 compression driver, made of aluminum, also offers innovative design features such as sealed voice coil gaps and water-resistant synthetic resin cones.

  • Dual Magnet Neo Motor Design
  • 25% Increased Voice Coil Size
  • Machined Aluminum Motor Heatsinks
  • Kapton Voice Coil for Reduced Inductance
  • MO-MBTN 125 Tweeter
  • Water-Resistant Polymer Cones
  • Rubber Center Cone Cover
  • CCA Voice Coil Wire for Increased Efficiency
  • Bi-Ampable
  • Available in 4 Ohm and 2 Ohm Voice Coils

Technical Specifications:

  • Speaker Size (In): 6.5
  • Tweeter Size (In): 1
  • Watts RMS: 250
  • Watts Peak: 500
  • Impedance: S4
  • VCD (In): 1.8
  • Frequency Response (Hz): 85 - 20k
  • Fs (Hz): 85
  • Qms: 1.66
  • Qes: 0.421
  • Qts: 0.336
  • Vas (Liters): 5.672
  • dBSPL: 95
  • Tweeter dBSPL: 104
  • Mounting Diameter (In): 5.75
  • Mounting Diameter (MM): 146
  • Mounting Depth (In): 2.75
  • Mounting Depth (MM): 70

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
2 Way

Type

2 Way

Speakers consisting of two ways: one for the treble (high frequencies) and one for the bass (low frequencies). Ideal for use in basic systems or for limited space.
Shape
Round
Round Speakers Diameter
8 "

Technical Specifications

Peak Power
500 W

Peak Power

The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
Power (RMS)
250 W

Power (RMS)

The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.
Nominal Impendance
4 ohm

Nominal Impendance

 The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The VO-XN300 continues the tradition of blending the latest Hi-Fidelity technology with the properties of high-end Pro Audio to produce a tonally smooth low-distortion frequency response over a wide bandwidth.

These 6.5-inch combination drivers cover frequencies from 85 Hz to 20 kHz, offering easy system design. They feature a larger Neodymium motor for greater overall surface area, improved power handling, and output capability. The 4th generation B1 compression driver, made of aluminum, also offers innovative design features such as sealed voice coil gaps and water-resistant synthetic resin cones.

  • Dual Magnet Neo Motor Design
  • 25% Increased Voice Coil Size
  • Machined Aluminum Motor Heatsinks
  • Kapton Voice Coil for Reduced Inductance
  • MO-MBTN 125 Tweeter
  • Water-Resistant Polymer Cones
  • Rubber Center Cone Cover
  • CCA Voice Coil Wire for Increased Efficiency
  • Bi-Ampable
  • Available in 4 Ohm and 2 Ohm Voice Coils

Technical Specifications:

  • Speaker Size (In): 6.5
  • Tweeter Size (In): 1
  • Watts RMS: 250
  • Watts Peak: 500
  • Impedance: S4
  • VCD (In): 1.8
  • Frequency Response (Hz): 85 - 20k
  • Fs (Hz): 85
  • Qms: 1.66
  • Qes: 0.421
  • Qts: 0.336
  • Vas (Liters): 5.672
  • dBSPL: 95
  • Tweeter dBSPL: 104
  • Mounting Diameter (In): 5.75
  • Mounting Diameter (MM): 146
  • Mounting Depth (In): 2.75
  • Mounting Depth (MM): 70

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
2 Way

Type

2 Way

Speakers consisting of two ways: one for the treble (high frequencies) and one for the bass (low frequencies). Ideal for use in basic systems or for limited space.
Shape
Round
Round Speakers Diameter
8 "

Technical Specifications

Peak Power
500 W

Peak Power

The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
Power (RMS)
250 W

Power (RMS)

The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.
Nominal Impendance
4 ohm

Nominal Impendance

 The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.