The Keenetic Voyager Pro is a Wi‑Fi 6 access point with Mesh network support and dual-band 2.4 GHz and 5 GHz connectivity. It supports IEEE 802.11b/g/n, 802.11a, 802.11ac and 802.11ax standards, with a maximum WLAN speed of 1,800 Mbps. It features two Gigabit Ethernet ports and PoE support.
- Type: Mesh access point
- Wi‑Fi generation: Wi‑Fi 6
- Frequency bands: 2.4 GHz and 5 GHz
- Maximum WLAN speed: 1,800 Mbps
- WLAN speed at 2.4 GHz: 574 Mbps
- WLAN speed at 5 GHz: 1,200 Mbps
- Networking standards: IEEE 802.11b/g/n, 802.11a, 802.11ac, 802.11ax, 802.11k, 802.11r, 802.11v, 802.1Q, 802.1x
- Ethernet ports: 2
- Ethernet speeds: 10, 100 and 1,000 Mbps
- PoE support: Yes
- Mounting: Indoor, ceiling or wall
- Antennas: 3 internal
- Colour: White
- Security: WPA3-PSK, WPA2-Enterprise, HTTPS, WEP, WPA-PSK, WPA2-PSK, WPA3-Enterprise, SSH, OWE, SPI
- Guest networks at 2.4 GHz: 7
- Flash memory: 128 MB
- Internal memory: 256 MB
- Processor: 2 cores
- Features: MIMO, Beamforming, QoS, parental controls, DHCP client and server, port forwarding, UPnP, WPS, DDNS, IGMP snooping and guest access
- Supported mobile operating systems: Android, iOS
- Power supply: 100–240 V, 50/60 Hz
- DC power jack: Yes
- Package contents: AC power adapter
- Operating temperature: 0–40 °C
- Operating relative humidity: 20–95%
- Dimensions: 170 × 170 × 38 mm
- Weight: 488 g
Technical Specifications
- Frequency
- Dual Band (2.4 & 5GHz)
- Maximum WLAN Speed
- 1800 Mbps
- Wi-Fi Generation
- Wi‑Fi 6
- IEEE Networking Standards
- 802.11 b/g/n, 802.11a, 802.11ac, 802.11ax
- LAN speed
- 1000 Mbps
- Wi-Fi Mesh Network
- Yes
- Ethernet Backhaul
- No
- PoE Support
- PoE
General Characteristics
- Placement
- Indoor
- Ethernet Ports
- 2
- Packaging
- Single Kit
Installation Type
- Ceiling
- Yes
- Wall
- Yes
- Board games
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.