Key Features:

• Pure Sine Wave Output – Ideal for sensitive electronic devices.
• Compatibility with Lead or Lithium Batteries – Supports both types.
• Charging Current Selection Depending on Application – Adjustment for maximum efficiency and safety.
• Automatic Generator Start – Sends a signal to start when the battery level is low.
• High-Efficiency Design – Optimizes performance and battery life.
• Automatic Restart with Adjustable AC Start Voltage – With AVR function for voltage stabilization.

Models: HB1512

• Nominal Capacity: 1500VA
• Nominal Power: 350W 1200W
• Nominal Voltage: 220VAC (typical)
• Output Voltage (AC): Same as AC input
• Output Frequency (AC): Same as input frequency
• Input Voltage Range: 220V: 154–264VAC ±3V / 110V: 77–132VAC ±3V
• Input Frequency: 50/60Hz ±5%
• Output Voltage: 220VAC ±10% (or 110VAC ±10%)
• Output Frequency: 50Hz or 60Hz ±1%
• Waveform: Pure sine wave
• Peak Load Ratio (MAX): 3:1
• Standby Consumption: 6W, 8W, 9W, 11W
• Protections: Overload / High Temperature / High or Low Output Voltage / Low Battery Voltage / Short Circuit / Overcharging / Over-discharging / Reverse Polarity (optional)
• LCD Display: AC input voltage, AC frequency, Photovoltaic Voltage & Current, Output Voltage & Frequency, Battery Voltage, Load Current, etc.
• Transfer Time: ≤10ms
• Battery Type: External lead-acid, liquid type or lithium battery
• Battery Voltage: 24VDC
• Charging Voltage: 13.75VDC
• Charging Current: 30A
• Charging Voltage Range from AC: 150–280VAC
• Audible Alarm:
  • Low Battery Protection: continuous beep
  • Low Battery: beep per second
  • Overload: continuous beep
  • Overload <130%: beep per second and output cutoff after 30 seconds
  • Overload >150%: output cutoff after 300ms
  • Fault: continuous beep
• Operating Temperature: 0~40℃
• Relative Humidity: —10℃ to 90% (non-condensing)
• Storage Temperature: -15~45℃
• Device Dimensions (mm): 300 × 144 × 213
• Box Dimensions (mm): 392 × 227 × 318
• Net Package Weight (kg): 9.5
• Gross Package Weight (kg): 10.45