The CH260 is an extended version of the classic DeepCool ITX CH160 case, capable of accommodating up to M-ATX motherboards and inherits high airflow thanks to the steel mesh panel.
The Micro Form Factor CH260 features a tempered glass side panel to give a striking look to your modern internal components, while the perforated top and front panels can be fitted with PIXEL rubber pieces. The case also meets the increasing demands for motherboards with rear connectors, offering a larger 29.6 mm gap at the back.
Small Size Outside, Full Size Inside
The CH260 offers multiple compatibility options for key components, supporting full-size GPUs up to 388 mm in length, or even longer up to 413 mm without a front fan installed. The ATX PS2 power supply can also fit in the case with a removable mounting bracket to free up space for easy cable management.
VENTILATION
The perimeter mesh panels and up to six 120 mm fan mounts effectively ensure the flow of cool air through the compact system and remove heat. The maximum thermal capacity can reach up to a 360 mm AIO cooler at the top or a tower cooler with a height of 174 mm on the CPU.
IMPROVED EXPERIENCE
Tool-free access to the front panel.
The modern input/output ports include two USB 3.0 ports plus one Gen2 Type-C port and a combined audio/microphone jack.
Three removable dust filters for easy cleaning.
Four independent and reusable PCI-e slots.
Tool-free access to the front panel.
The modern input/output ports include two USB 3.0 ports plus one Gen2 Type-C port and a combined audio/microphone jack.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Case is perfect, supports ATX power supplies with zero issues. The other reviewer just has a massive skill issue.
My PSU was placed LOWER than the maximum height, yet it leaves a lot of free space under it, like 2-3 centimetres of clearance over the GPU backplate. If placed higher, there's absolutely no way you can have any issues. Even at the max GPU length.
There's extra space behind motherboard for a hard drive and to hide all the wires. Supports 6 places for fans, 3 top of which can be used for water cooling.
Yes, it's hard to properly wire and assemble everything, it's a really small microATX case, so expect to have fun with it. But the results are worth it
Case is perfect, supports ATX power supplies with zero issues. The other reviewer just has a massive skill issue.
My PSU was placed LOWER than the maximum height, yet it leaves a lot of free space under it, like 2-3 centimetres of clearance over the GPU backplate. If placed higher, there's absolutely no way you can have any issues. Even at the max GPU length.
There's extra space behind motherboard for a hard drive and to hide all the wires. Supports 6 places for fans, 3 top of which can be used for water cooling.
Yes, it's hard to properly wire and assemble everything, it's a really small microATX case, so expect to have fun with it. But the results are worth it
It does not fit an ATX power supply as stated
Maybe specific models, provided that the GPU does not exceed 25cm
The power extension cable that you are required to use only connects with the orientation to the right; if the power supply has the socket on the left side, it does not connect
Δεν χωραει ATX τροφοδοτικο οπως αναφερεται
Ισως συγκεκριμενα μοντελα με τη προυποθεση οτι η gpu δεν ξεπερνα τα 25cm
Η επεκταση του καλωδιου τροφοδοσιας που πρεπει υποχρεωτικα να χρησιμοποιησεις κουμπωνει μονο με φορα προς τα δεξια, αν το τροφοδοτικο εχει απτην αριστερη πλευρα την υποδοχη δεν κουμπωνει
Case is perfect, supports ATX power supplies with zero issues. The other reviewer just has a massive skill issue.
My PSU was placed LOWER than the maximum height, yet it leaves a lot of free space under it, like 2-3 centimetres of clearance over the GPU backplate. If placed higher, there's absolutely no way you can have any issues. Even at the max GPU length.
There's extra space behind motherboard for a hard drive and to hide all the wires. Supports 6 places for fans, 3 top of which can be used for water cooling.
Yes, it's hard to properly wire and assemble everything, it's a really small microATX case, so expect to have fun with it. But the results are worth it
Case is perfect, supports ATX power supplies with zero issues. The other reviewer just has a massive skill issue.
My PSU was placed LOWER than the maximum height, yet it leaves a lot of free space under it, like 2-3 centimetres of clearance over the GPU backplate. If placed higher, there's absolutely no way you can have any issues. Even at the max GPU length.
There's extra space behind motherboard for a hard drive and to hide all the wires. Supports 6 places for fans, 3 top of which can be used for water cooling.
Yes, it's hard to properly wire and assemble everything, it's a really small microATX case, so expect to have fun with it. But the results are worth it
It does not fit an ATX power supply as stated
Maybe specific models, provided that the GPU does not exceed 25cm
The power extension cable that you are required to use only connects with the orientation to the right; if the power supply has the socket on the left side, it does not connect
Δεν χωραει ATX τροφοδοτικο οπως αναφερεται
Ισως συγκεκριμενα μοντελα με τη προυποθεση οτι η gpu δεν ξεπερνα τα 25cm
Η επεκταση του καλωδιου τροφοδοσιας που πρεπει υποχρεωτικα να χρησιμοποιησεις κουμπωνει μονο με φορα προς τα δεξια, αν το τροφοδοτικο εχει απτην αριστερη πλευρα την υποδοχη δεν κουμπωνει
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Description
GO MICRO
The Micro Form Factor CH260 features a tempered glass side panel to give a striking look to your modern internal components, while the perforated top and front panels can be fitted with PIXEL rubber pieces. The case also meets the increasing demands for motherboards with rear connectors, offering a larger 29.6 mm gap at the back.
Small Size Outside, Full Size Inside
The CH260 offers multiple compatibility options for key components, supporting full-size GPUs up to 388 mm in length, or even longer up to 413 mm without a front fan installed. The ATX PS2 power supply can also fit in the case with a removable mounting bracket to free up space for easy cable management.
VENTILATION
The perimeter mesh panels and up to six 120 mm fan mounts effectively ensure the flow of cool air through the compact system and remove heat. The maximum thermal capacity can reach up to a 360 mm AIO cooler at the top or a tower cooler with a height of 174 mm on the CPU.
IMPROVED EXPERIENCE
Tool-free access to the front panel.
The modern input/output ports include two USB 3.0 ports plus one Gen2 Type-C port and a combined audio/microphone jack.
Three removable dust filters for easy cleaning.
Four independent and reusable PCI-e slots.
Tool-free access to the front panel.
The modern input/output ports include two USB 3.0 ports plus one Gen2 Type-C port and a combined audio/microphone jack.
Case is perfect, supports ATX power supplies with zero issues. The other reviewer just has a massive skill issue.
My PSU was placed LOWER than the maximum height, yet it leaves a lot of free space under it, like 2-3 centimetres of clearance over the GPU backplate. If placed higher, there's absolutely no way you can have any issues. Even at the max GPU length.
There's extra space behind motherboard for a hard drive and to hide all the wires. Supports 6 places for fans, 3 top of which can be used for water cooling.
Yes, it's hard to properly wire and assemble everything, it's a really small microATX case, so expect to have fun with it. But the results are worth it
Case is perfect, supports ATX power supplies with zero issues. The other reviewer just has a massive skill issue.
My PSU was placed LOWER than the maximum height, yet it leaves a lot of free space under it, like 2-3 centimetres of clearance over the GPU backplate. If placed higher, there's absolutely no way you can have any issues. Even at the max GPU length.
There's extra space behind motherboard for a hard drive and to hide all the wires. Supports 6 places for fans, 3 top of which can be used for water cooling.
Yes, it's hard to properly wire and assemble everything, it's a really small microATX case, so expect to have fun with it. But the results are worth it
It does not fit an ATX power supply as stated
Maybe specific models, provided that the GPU does not exceed 25cm
The power extension cable that you are required to use only connects with the orientation to the right; if the power supply has the socket on the left side, it does not connect
Δεν χωραει ATX τροφοδοτικο οπως αναφερεται
Ισως συγκεκριμενα μοντελα με τη προυποθεση οτι η gpu δεν ξεπερνα τα 25cm
Η επεκταση του καλωδιου τροφοδοσιας που πρεπει υποχρεωτικα να χρησιμοποιησεις κουμπωνει μονο με φορα προς τα δεξια, αν το τροφοδοτικο εχει απτην αριστερη πλευρα την υποδοχη δεν κουμπωνει
Case is perfect, supports ATX power supplies with zero issues. The other reviewer just has a massive skill issue.
My PSU was placed LOWER than the maximum height, yet it leaves a lot of free space under it, like 2-3 centimetres of clearance over the GPU backplate. If placed higher, there's absolutely no way you can have any issues. Even at the max GPU length.
There's extra space behind motherboard for a hard drive and to hide all the wires. Supports 6 places for fans, 3 top of which can be used for water cooling.
Yes, it's hard to properly wire and assemble everything, it's a really small microATX case, so expect to have fun with it. But the results are worth it
Case is perfect, supports ATX power supplies with zero issues. The other reviewer just has a massive skill issue.
My PSU was placed LOWER than the maximum height, yet it leaves a lot of free space under it, like 2-3 centimetres of clearance over the GPU backplate. If placed higher, there's absolutely no way you can have any issues. Even at the max GPU length.
There's extra space behind motherboard for a hard drive and to hide all the wires. Supports 6 places for fans, 3 top of which can be used for water cooling.
Yes, it's hard to properly wire and assemble everything, it's a really small microATX case, so expect to have fun with it. But the results are worth it
It does not fit an ATX power supply as stated
Maybe specific models, provided that the GPU does not exceed 25cm
The power extension cable that you are required to use only connects with the orientation to the right; if the power supply has the socket on the left side, it does not connect
Δεν χωραει ATX τροφοδοτικο οπως αναφερεται
Ισως συγκεκριμενα μοντελα με τη προυποθεση οτι η gpu δεν ξεπερνα τα 25cm
Η επεκταση του καλωδιου τροφοδοσιας που πρεπει υποχρεωτικα να χρησιμοποιησεις κουμπωνει μονο με φορα προς τα δεξια, αν το τροφοδοτικο εχει απτην αριστερη πλευρα την υποδοχη δεν κουμπωνει
