Skroutz.mt

Telwin Force 145 Welding Machine Inverter MMA with Maximum Welding Current 130A and Duty Cycle 7%
Welding Machines

Telwin Force 145 Welding Machine Inverter MMA with Maximum Welding Current 130A and Duty Cycle 7%

FORCE 145 INVERTER Electrode MMA-TIG

  • Weight: 2.5 kg
  • Frequency: 50-60 Hz
  • Voltage: 230 V
  • Protection Degree: IP21
  • Electrode Diameter max.: 1.5-3.25 mm
  • Welding Current: 10-130 A
  • Efficiency: 60% 130 A
  • ...

FORCE 145 INVERTER Electrode MMA-TIG

  • Weight: 2.5 kg
  • Frequency: 50-60 Hz
  • Voltage: 230 V
  • Protection Degree: IP21
  • Electrode Diameter max.: 1.5-3.25 mm
  • Welding Current: 10-130 A
  • Efficiency: 60% 130 A
  • Power: 3.5 KVA

Included:

  • Cables
  • Clamp
  • Ground clamp
  • Chipping hammer
  • Plastic carrying case

Description:

  • High reliability welding
  • Low power consumption
  • Compact...
See full description See full description

  • Welding Current

    130

    Suitable for use in medium-thickness metal constructions and pipelines.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    3.5

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all

User Manual

266 00 €
Delivery by Thu, 25 Jun
17,00 €   shipping cost
Sent from Greece
From Emkate 4.9 (18)
4.9 (18 reviews)
Greece
10 pieces
See Tools on the page of Emkate
Product report

Description

Description

FORCE 145 INVERTER Electrode MMA-TIG

  • Weight: 2.5 kg
  • Frequency: 50-60 Hz
  • Voltage: 230 V
  • Protection Degree: IP21
  • Electrode Diameter max.: 1.5-3.25 mm
  • Welding Current: 10-130 A
  • Efficiency: 60% 130 A
  • Power: 3.5 KVA

Included:

  • Cables
  • Clamp
  • Ground clamp
  • Chipping hammer
  • Plastic carrying case

Description:

  • High reliability welding
  • Low power consumption
  • Compact size
  • Lightweight for easy transport and outdoor use
  • Smooth and easy arc start
  • Stable welding operation for uniform seam without spatter
  • Protection against input voltage fluctuations
  • Ability to weld BASIC-RUTILE-INOX electrodes
  • Capable of burning electrodes up to 3.25mm
  • Arc Force, Hot Start, Anti-Stick systems

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Dimensions

Type
MMA

Type

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
130 A

Welding Current (max): 130


Suitable for use in medium-thickness metal constructions and pipelines.
Operation Cycle (max Ampere)
7 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
3.5 kVA

Power: 3.5


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
3.2 mm

Maximum Electrode Diameter: 3.2


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Weight
5200 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
Yes

with Voltage Stabilizer


It detects fluctuations in the supply voltage and corrects them in real-time, resulting in a stable output voltage, improving the machine's lifespan and the quality of the welding.
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (13)

Reviews

4.1
13
4.1
Review this product
  1. 6
  2. 4
  3. 2
  4. 2 stars
    0
  5. 1
Review this product
  • Weight
  • Volume
  • Easy to use
  • Power
  • Construction quality
  • Machine durability
  • Value for money
  • Welding cable length
  • Slobbery
    5
    1 out of 2 members found this review helpful
    Slobbery
    This review is about the welding current (max): 150 A

    I have had it for over 5 years and it has worked very well for amateur use. My father has literally torn it apart and it still holds up. It is very lightweight and the connection is flawless. It easily fits in its suitcase and you can take it wherever you want. I would definitely buy it again.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • Vasilis_Liapis
    5
    3 out of 4 members found this review helpful
    Vasilis_Liapis
    This review is about the welding current (max): 150 A

    Electro-welding simply rocks for the amps it states. I've had it for 2 years and what it offers is more than enough, quality welding, powerful! And it doesn't fade compared to other 150A electro-weldings at half the price. I have the same one for professional use at 200 amps and even after 15 years, it still works.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • GEORGIOS_KARALIS
    3
    8 out of 9 members found this review helpful
    GEORGIOS_KARALIS
    This review is about the welding current (max): 150 A

    One day the DEI network had problems, power outages, etc. I turned it on to do welding work. It made a noise and everything went off. I tried to fix it, but couldn't figure it out. Some said it couldn't be repaired, others said it wasn't worth it. They were asking for half of what I bought it for. Recently, someone told me to bring it and we'll see. I asked how much it would cost, but didn't get an answer. Now I haven't had an electric welder for a year. I'm using the old heavy Olympos, which is quite heavy. I'm looking to buy another one, of course not the same. When you sell a 270 euro electric welder, you should have the ability to support it for service. You're supposed to buy a brand, not one of those 60 euro ones for one use and then throw it away when it breaks

    Translated from Greek ·
    • Weight
    • Volume
    • Easy to use
    • Power
    • Construction quality
    • Machine durability
    • Welding cable length
    • Value for money
    Did you find this review helpful?
  • Iraklis_Tsirvoulis
    4
    7 out of 7 members found this review helpful
    Iraklis_Tsirvoulis
    This review is about the welding current (max): 170 A

    Very good welding, nice cord, powerful. I have had it for 3 years, as soon as I got it, I made a long cable for the clamp because its own is only 1 meter, but I have used it many times all day with a generator, it sticks well, you can work with it all day with electricity, very lightweight. It has fallen down a couple of times luckily from a small height without anything happening, but its construction is a bit light, I think it needed a little extra reinforcement for protection in case it takes a strong hit, I believe something will happen, let's not forget that in workshops, anything is possible.

    Translated from Greek ·
    • Power
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Machine durability
    • Welding cable length
    Did you find this review helpful?
  • foudou80
    4
    13 out of 13 members found this review helpful
    foudou80
    This review is about the welding current (max): 170 A

    I have had it for about a year. I am extremely satisfied with its performance and quality of operation. The automations it has work flawlessly and make the device very easy to use for amateurs, as it is very difficult for the electrode to stick. The build quality is very good and the low weight, at two and a half kilograms, is also a positive aspect. As for reliability, it is still too early to judge, but the good reputation of Telwin makes me optimistic.

    The only thing I didn't like is the very short (1.70m) cables that come with the welding machine and the poor quality body clamp, which you immediately throw away and replace with another one... They wouldn't go bankrupt if they included slightly longer cables so that one can work more comfortably and a decent clamp... After all, it's not cheap...

    Translated from Greek ·
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • narkissoss
    5
    18 out of 18 members found this review helpful
    narkissoss

    a very good welding machine, it sticks very well, I have it for almost 2 years (the truth is that I don't use it very often). It handles 130 amps without any problems and with a 3.25 electrode. I bought it after a lot of research on forums. Telwin is the Mercedes of welding machines.

    Translated from Greek ·
    Did you find this review helpful?
  • 1
    1 out of 1 members found this review helpful
    stelios_spyropoulos

    After 6 years of occasional use, it burned out..... I didn't expect this from telwin

    Translated from Greek ·
    • Power
    • Weight
    • Volume
    • Easy to use
    • Construction quality
    • Machine durability
    • Welding cable length
    • Value for money
    Did you find this review helpful?
  • 5
    1 out of 1 members found this review helpful
    leonvasilis1976
    This review is about the welding current (max): 150 A

    Awesome machine for professionals

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • 4
    Panos_Stavrakis
    This review is about the welding current (max): 150 A

    Four stars because its cables are short

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • 3
    3 out of 3 members found this review helpful
    KADHM

    After two years of amateur use, it broke.
    Unacceptable considering its price.

    Translated from Greek ·
    • Weight
    • Volume
    • Easy to use
    • Power
    • Construction quality
    • Welding cable length
    • Machine durability
    • Value for money
    Did you find this review helpful?
  • 5
    mikepapgr
    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Welding cable length
    • Value for money
  • 5
    evi_topouzidou
    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
  • 4
    adrew_gate13
    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
  • Slobbery
    5
    Slobbery

    I have had it for over 5 years and it has worked very well for amateur use. My father has literally torn it apart and it still holds up. It is very lightweight and the connection is flawless. It easily fits in its suitcase and you can take it wherever you want. I would definitely buy it again.

    Translated from Greek ·
    1
  • Vasilis_Liapis
    5
    Vasilis_Liapis

    Electro-welding simply rocks for the amps it states. I've had it for 2 years and what it offers is more than enough, quality welding, powerful! And it doesn't fade compared to other 150A electro-weldings at half the price. I have the same one for professional use at 200 amps and even after 15 years, it still works.

    Translated from Greek ·
    3
  • GEORGIOS_KARALIS
    3
    GEORGIOS_KARALIS

    One day the DEI network had problems, power outages, etc. I turned it on to do welding work. It made a noise and everything went off. I tried to fix it, but couldn't figure it out. Some said it couldn't be repaired, others said it wasn't worth it. They were asking for half of what I bought it for. Recently, someone told me to bring it and we'll see. I asked how much it would cost, but didn't get an answer. Now I haven't had an electric welder for a year. I'm using the old heavy Olympos, which is quite heavy. I'm looking to buy another one, of course not the same. When you sell a 270 euro electric welder, you should have the ability to support it for service. You're supposed to buy a brand, not one of those 60 euro ones for one use and then throw it away when it breaks

    Translated from Greek ·
    8
  • Iraklis_Tsirvoulis
    4
    Iraklis_Tsirvoulis

    Very good welding, nice cord, powerful. I have had it for 3 years, as soon as I got it, I made a long cable for the clamp because its own is only 1 meter, but I have used it many times all day with a generator, it sticks well, you can work with it all day with electricity, very lightweight. It has fallen down a couple of times luckily from a small height without anything happening, but its construction is a bit light, I think it needed a little extra reinforcement for protection in case it takes a strong hit, I believe something will happen, let's not forget that in workshops, anything is possible.

    Translated from Greek ·
    7
  • foudou80
    4
    foudou80

    I have had it for about a year. I am extremely satisfied with its performance and quality of operation. The automations it has work flawlessly and make the device very easy to use for amateurs, as it is very difficult for the electrode to stick. The build quality is very good and the low weight, at two and a half kilograms, is also a positive aspect. As for reliability, it is still too early to judge, but the good reputation of Telwin makes me optimistic.

    The only thing I didn't like is the very short (1.70m) cables that come with the welding machine and the poor quality body clamp, which you immediately throw away and replace with another one... They wouldn't go bankrupt if they included slightly longer cables so that one can work more comfortably and a decent clamp... After all, it's not cheap...

    Translated from Greek ·
    13
  • See all

Description & Specifications

FORCE 145 INVERTER Electrode MMA-TIG

  • Weight: 2.5 kg
  • Frequency: 50-60 Hz
  • Voltage: 230 V
  • Protection Degree: IP21
  • Electrode Diameter max.: 1.5-3.25 mm
  • Welding Current: 10-130 A
  • Efficiency: 60% 130 A
  • Power: 3.5 KVA

Included:

  • Cables
  • Clamp
  • Ground clamp
  • Chipping hammer
  • Plastic carrying case

Description:

  • High reliability welding
  • Low power consumption
  • Compact size
  • Lightweight for easy transport and outdoor use
  • Smooth and easy arc start
  • Stable welding operation for uniform seam without spatter
  • Protection against input voltage fluctuations
  • Ability to weld BASIC-RUTILE-INOX electrodes
  • Capable of burning electrodes up to 3.25mm
  • Arc Force, Hot Start, Anti-Stick systems

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Dimensions

Type
MMA

Type

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
130 A

Welding Current (max): 130


Suitable for use in medium-thickness metal constructions and pipelines.
Operation Cycle (max Ampere)
7 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
3.5 kVA

Power: 3.5


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
3.2 mm

Maximum Electrode Diameter: 3.2


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Weight
5200 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
Yes

with Voltage Stabilizer


It detects fluctuations in the supply voltage and corrects them in real-time, resulting in a stable output voltage, improving the machine's lifespan and the quality of the welding.
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (13)

4.1
13
4.1
Review this product
  1. 6
  2. 4
  3. 2
  4. 2 stars
    0
  5. 1
Review this product
  • Weight
  • Volume
  • Easy to use
  • Power
  • Construction quality
  • Machine durability
  • Value for money
  • Welding cable length
  • Slobbery
    5
    1 out of 2 members found this review helpful
    Slobbery
    This review is about the welding current (max): 150 A

    I have had it for over 5 years and it has worked very well for amateur use. My father has literally torn it apart and it still holds up. It is very lightweight and the connection is flawless. It easily fits in its suitcase and you can take it wherever you want. I would definitely buy it again.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • Vasilis_Liapis
    5
    3 out of 4 members found this review helpful
    Vasilis_Liapis
    This review is about the welding current (max): 150 A

    Electro-welding simply rocks for the amps it states. I've had it for 2 years and what it offers is more than enough, quality welding, powerful! And it doesn't fade compared to other 150A electro-weldings at half the price. I have the same one for professional use at 200 amps and even after 15 years, it still works.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • GEORGIOS_KARALIS
    3
    8 out of 9 members found this review helpful
    GEORGIOS_KARALIS
    This review is about the welding current (max): 150 A

    One day the DEI network had problems, power outages, etc. I turned it on to do welding work. It made a noise and everything went off. I tried to fix it, but couldn't figure it out. Some said it couldn't be repaired, others said it wasn't worth it. They were asking for half of what I bought it for. Recently, someone told me to bring it and we'll see. I asked how much it would cost, but didn't get an answer. Now I haven't had an electric welder for a year. I'm using the old heavy Olympos, which is quite heavy. I'm looking to buy another one, of course not the same. When you sell a 270 euro electric welder, you should have the ability to support it for service. You're supposed to buy a brand, not one of those 60 euro ones for one use and then throw it away when it breaks

    Translated from Greek ·
    • Weight
    • Volume
    • Easy to use
    • Power
    • Construction quality
    • Machine durability
    • Welding cable length
    • Value for money
    Did you find this review helpful?
  • Iraklis_Tsirvoulis
    4
    7 out of 7 members found this review helpful
    Iraklis_Tsirvoulis
    This review is about the welding current (max): 170 A

    Very good welding, nice cord, powerful. I have had it for 3 years, as soon as I got it, I made a long cable for the clamp because its own is only 1 meter, but I have used it many times all day with a generator, it sticks well, you can work with it all day with electricity, very lightweight. It has fallen down a couple of times luckily from a small height without anything happening, but its construction is a bit light, I think it needed a little extra reinforcement for protection in case it takes a strong hit, I believe something will happen, let's not forget that in workshops, anything is possible.

    Translated from Greek ·
    • Power
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Machine durability
    • Welding cable length
    Did you find this review helpful?
  • foudou80
    4
    13 out of 13 members found this review helpful
    foudou80
    This review is about the welding current (max): 170 A

    I have had it for about a year. I am extremely satisfied with its performance and quality of operation. The automations it has work flawlessly and make the device very easy to use for amateurs, as it is very difficult for the electrode to stick. The build quality is very good and the low weight, at two and a half kilograms, is also a positive aspect. As for reliability, it is still too early to judge, but the good reputation of Telwin makes me optimistic.

    The only thing I didn't like is the very short (1.70m) cables that come with the welding machine and the poor quality body clamp, which you immediately throw away and replace with another one... They wouldn't go bankrupt if they included slightly longer cables so that one can work more comfortably and a decent clamp... After all, it's not cheap...

    Translated from Greek ·
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • narkissoss
    5
    18 out of 18 members found this review helpful
    narkissoss

    a very good welding machine, it sticks very well, I have it for almost 2 years (the truth is that I don't use it very often). It handles 130 amps without any problems and with a 3.25 electrode. I bought it after a lot of research on forums. Telwin is the Mercedes of welding machines.

    Translated from Greek ·
    Did you find this review helpful?
  • 1
    1 out of 1 members found this review helpful
    stelios_spyropoulos

    After 6 years of occasional use, it burned out..... I didn't expect this from telwin

    Translated from Greek ·
    • Power
    • Weight
    • Volume
    • Easy to use
    • Construction quality
    • Machine durability
    • Welding cable length
    • Value for money
    Did you find this review helpful?
  • 5
    1 out of 1 members found this review helpful
    leonvasilis1976
    This review is about the welding current (max): 150 A

    Awesome machine for professionals

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • 4
    Panos_Stavrakis
    This review is about the welding current (max): 150 A

    Four stars because its cables are short

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • 3
    3 out of 3 members found this review helpful
    KADHM

    After two years of amateur use, it broke.
    Unacceptable considering its price.

    Translated from Greek ·
    • Weight
    • Volume
    • Easy to use
    • Power
    • Construction quality
    • Welding cable length
    • Machine durability
    • Value for money
    Did you find this review helpful?
  • 5
    mikepapgr
    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Welding cable length
    • Value for money
  • 5
    evi_topouzidou
    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
  • 4
    adrew_gate13
    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
  • Slobbery
    5
    Slobbery

    I have had it for over 5 years and it has worked very well for amateur use. My father has literally torn it apart and it still holds up. It is very lightweight and the connection is flawless. It easily fits in its suitcase and you can take it wherever you want. I would definitely buy it again.

    Translated from Greek ·
    1
  • Vasilis_Liapis
    5
    Vasilis_Liapis

    Electro-welding simply rocks for the amps it states. I've had it for 2 years and what it offers is more than enough, quality welding, powerful! And it doesn't fade compared to other 150A electro-weldings at half the price. I have the same one for professional use at 200 amps and even after 15 years, it still works.

    Translated from Greek ·
    3
  • GEORGIOS_KARALIS
    3
    GEORGIOS_KARALIS

    One day the DEI network had problems, power outages, etc. I turned it on to do welding work. It made a noise and everything went off. I tried to fix it, but couldn't figure it out. Some said it couldn't be repaired, others said it wasn't worth it. They were asking for half of what I bought it for. Recently, someone told me to bring it and we'll see. I asked how much it would cost, but didn't get an answer. Now I haven't had an electric welder for a year. I'm using the old heavy Olympos, which is quite heavy. I'm looking to buy another one, of course not the same. When you sell a 270 euro electric welder, you should have the ability to support it for service. You're supposed to buy a brand, not one of those 60 euro ones for one use and then throw it away when it breaks

    Translated from Greek ·
    8
  • Iraklis_Tsirvoulis
    4
    Iraklis_Tsirvoulis

    Very good welding, nice cord, powerful. I have had it for 3 years, as soon as I got it, I made a long cable for the clamp because its own is only 1 meter, but I have used it many times all day with a generator, it sticks well, you can work with it all day with electricity, very lightweight. It has fallen down a couple of times luckily from a small height without anything happening, but its construction is a bit light, I think it needed a little extra reinforcement for protection in case it takes a strong hit, I believe something will happen, let's not forget that in workshops, anything is possible.

    Translated from Greek ·
    7
  • foudou80
    4
    foudou80

    I have had it for about a year. I am extremely satisfied with its performance and quality of operation. The automations it has work flawlessly and make the device very easy to use for amateurs, as it is very difficult for the electrode to stick. The build quality is very good and the low weight, at two and a half kilograms, is also a positive aspect. As for reliability, it is still too early to judge, but the good reputation of Telwin makes me optimistic.

    The only thing I didn't like is the very short (1.70m) cables that come with the welding machine and the poor quality body clamp, which you immediately throw away and replace with another one... They wouldn't go bankrupt if they included slightly longer cables so that one can work more comfortably and a decent clamp... After all, it's not cheap...

    Translated from Greek ·
    13
  • See all
266,00 €
17,00 €   shipping cost