Skroutz.mt

Atlas Filtri Hydra M RAH Water Filtration System Single Central Supply Micron 1 1/4" 251134
Water Filtration Systems

Atlas Filtri Hydra M RAH Water Filtration System Single Central Supply Micron 1 1/4" 251134

Features:

  • Equipped with a stainless steel air vent valve
  • Maximum operating pressure: 8 bar (800kPa)
  • Minimum operating pressure: 1.8 bar
  • Maximum operating temperature: 45°C
  • Minimum operating...

Features:

  • Equipped with a stainless steel air vent valve
  • Maximum operating pressure: 8 bar (800kPa)
  • Minimum operating pressure: 1.8 bar
  • Maximum operating temperature: 45°C
  • Minimum operating temperature: 4°C
  • Head/Connector Material: Reinforced Polypropylene
  • Glass Material: PET
  • Special Thread In/Out: CW 617 N
  • Sealing Flange & Valve: EPDM
  • Self-cleaning valve:...
See full description See full description
Review the product
Product report

Description

Description

Features:

  • Equipped with a stainless steel air vent valve
  • Maximum operating pressure: 8 bar (800kPa)
  • Minimum operating pressure: 1.8 bar
  • Maximum operating temperature: 45°C
  • Minimum operating temperature: 4°C
  • Head/Connector Material: Reinforced Polypropylene
  • Glass Material: PET
  • Special Thread In/Out: CW 617 N
  • Sealing Flange & Valve: EPDM
  • Self-cleaning valve: Nickel-plated brass CW 617 N
  • Drain and hose inlet: Reinforced polypropylene
  • Flow rate: 8000 lt/h
  • Made from non-toxic materials, suitable for drinking water.

Notes:

  • Before installing any filter, a pressure reducer is recommended.
  • When installing, use only Teflon tape.
  • When replacing the cartridge, clean the glass flange, wipe it dry, apply lubricant, and re-install it.
  • When the flange wears out, it needs to be replaced.
  • The filter replacement time depends on the quality and consumption of the water.
  • Base & Key included.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Colour
Transparent
Number of Filters
Single
Type
Central Supply

Type

Central Supply
The installation is done by a plumber. They filter water for the whole house.
Material
Plastic
with Replacement Filter
No
with Faucet
No
Pipe Cross Section
1 1/4"

Pipe Cross Section

This concerns the size of the connection thread of the device with the supply. The pipe diameter (inlet-outlet) of the device must be the same as that of the water supply, in order for the installation to be done correctly.
Self-Cleaning
Yes

Self-Cleaning


This only applies to Central Supply filters. Water supply will not be interrupted during cleaning.
with Manometer
Yes

with Manometer


This applies only to Central Supply filters. It measures and records water pressure.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Features:

  • Equipped with a stainless steel air vent valve
  • Maximum operating pressure: 8 bar (800kPa)
  • Minimum operating pressure: 1.8 bar
  • Maximum operating temperature: 45°C
  • Minimum operating temperature: 4°C
  • Head/Connector Material: Reinforced Polypropylene
  • Glass Material: PET
  • Special Thread In/Out: CW 617 N
  • Sealing Flange & Valve: EPDM
  • Self-cleaning valve: Nickel-plated brass CW 617 N
  • Drain and hose inlet: Reinforced polypropylene
  • Flow rate: 8000 lt/h
  • Made from non-toxic materials, suitable for drinking water.

Notes:

  • Before installing any filter, a pressure reducer is recommended.
  • When installing, use only Teflon tape.
  • When replacing the cartridge, clean the glass flange, wipe it dry, apply lubricant, and re-install it.
  • When the flange wears out, it needs to be replaced.
  • The filter replacement time depends on the quality and consumption of the water.
  • Base & Key included.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Colour
Transparent
Number of Filters
Single
Type
Central Supply

Type

Central Supply
The installation is done by a plumber. They filter water for the whole house.
Material
Plastic
with Replacement Filter
No
with Faucet
No
Pipe Cross Section
1 1/4"

Pipe Cross Section

This concerns the size of the connection thread of the device with the supply. The pipe diameter (inlet-outlet) of the device must be the same as that of the water supply, in order for the installation to be done correctly.
Self-Cleaning
Yes

Self-Cleaning


This only applies to Central Supply filters. Water supply will not be interrupted during cleaning.
with Manometer
Yes

with Manometer


This applies only to Central Supply filters. It measures and records water pressure.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

91,00 €
14,00 €   shipping cost