Skroutz.mt

Miboxer Smart Intermediate Switch ZigBee & RF
Intermediate Switches

Miboxer Smart Intermediate Switch ZigBee & RF Code: MIB-TRI-C1ZR

The Dimmer Switch ZigBee 230V Mi-Light TRI-C1ZR is a TRIAC switch that adjusts and reduces the brightness of your lighting products powered by electricity up to 1.36 A. It is compatible with core,...

The Dimmer Switch ZigBee 230V Mi-Light TRI-C1ZR is a TRIAC switch that adjusts and reduces the brightness of your lighting products powered by electricity up to 1.36 A. It is compatible with core, halogen, or LED lighting products. The dimmer also works with lighting products that use the ZigBee protocol, allowing it to connect to your smart home system....

See full description See full description

  • Connectivity

    RF

    Wireless control via radio frequencies.

    ZigBee

    Special connectivity network for smart devices that offers high stability and energy savings.

  • Usage

    Lighting

    For remote control of lamps and lighting fixtures.

  • Maximum Load

    It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

    For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.

  • Dimmer

    It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
  • See all
Review the product
Product report

Description

Description

The Dimmer Switch ZigBee 230V Mi-Light TRI-C1ZR is a TRIAC switch that adjusts and reduces the brightness of your lighting products powered by electricity up to 1.36 A. It is compatible with core, halogen, or LED lighting products. The dimmer also works with lighting products that use the ZigBee protocol, allowing it to connect to your smart home system. This enables you to control your lighting from anywhere in the world and set routines, such as turning on outdoor lights when you arrive home in the evening.

The dimmer is compatible with Mi-Light / Mi-Boxer 2.4GHz RF wireless remote controls or control panels, along with additional PUSH connections. When in 2.4 GHz control mode, it also provides signal synchronization, effectively creating a 2.4 GHz MESH network that transmits the signal from one unit to another, with no limitations on the number of units that can operate together wirelessly.

When installed under a switch, the dimmer functions as a regular switch, performing the function of interfacing between the power flow and the lamps. Alternatively, you can expand the system with app control by purchasing a ZigBee gateway, which also supports control via voice assistants. In the app, you can set whether the triac should operate as a dimmer or only as a switch, and the dimming function will be locked.

Communication between devices occurs via 2.4GHz RF signal or the ZigBee protocol.

  • Installation possible under a switch in the KU68 case
  • Communication with the controller using RF 2.4 GHz signal up to a distance of 30 m
  • Supports ZigBee 3.0
  • Can also operate as a switch without dimming - must be activated in the app
  • Control capability with the PUSH button
  • Easy light on/off - SOFT ON/OFF
  • The unit remembers the last set brightness even if the power supply is disconnected
  • Additional adjustment of minimum light intensity

The ability to independently control multiple circuits requires the use of one TRI-C1/circuit. Up to 4 controllers from the Mi-Light series can be connected to each receiver, allowing lighting control from multiple locations.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
MIB-TRI-C1ZR

Specifications

Switch Type
Smart Switch
Usage
Lighting

Usage

Lighting

For remote control of lamps and lighting fixtures.

Smart Attributes

Connectivity
RF, ZigBee

Connectivity

RF

Wireless control via radio frequencies.

ZigBee

Special connectivity network for smart devices that offers high stability and energy savings.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
1.36 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Pieces
1

Features

Dimmer
Yes

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Dimmer Switch ZigBee 230V Mi-Light TRI-C1ZR is a TRIAC switch that adjusts and reduces the brightness of your lighting products powered by electricity up to 1.36 A. It is compatible with core, halogen, or LED lighting products. The dimmer also works with lighting products that use the ZigBee protocol, allowing it to connect to your smart home system. This enables you to control your lighting from anywhere in the world and set routines, such as turning on outdoor lights when you arrive home in the evening.

The dimmer is compatible with Mi-Light / Mi-Boxer 2.4GHz RF wireless remote controls or control panels, along with additional PUSH connections. When in 2.4 GHz control mode, it also provides signal synchronization, effectively creating a 2.4 GHz MESH network that transmits the signal from one unit to another, with no limitations on the number of units that can operate together wirelessly.

When installed under a switch, the dimmer functions as a regular switch, performing the function of interfacing between the power flow and the lamps. Alternatively, you can expand the system with app control by purchasing a ZigBee gateway, which also supports control via voice assistants. In the app, you can set whether the triac should operate as a dimmer or only as a switch, and the dimming function will be locked.

Communication between devices occurs via 2.4GHz RF signal or the ZigBee protocol.

  • Installation possible under a switch in the KU68 case
  • Communication with the controller using RF 2.4 GHz signal up to a distance of 30 m
  • Supports ZigBee 3.0
  • Can also operate as a switch without dimming - must be activated in the app
  • Control capability with the PUSH button
  • Easy light on/off - SOFT ON/OFF
  • The unit remembers the last set brightness even if the power supply is disconnected
  • Additional adjustment of minimum light intensity

The ability to independently control multiple circuits requires the use of one TRI-C1/circuit. Up to 4 controllers from the Mi-Light series can be connected to each receiver, allowing lighting control from multiple locations.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
MIB-TRI-C1ZR

Specifications

Switch Type
Smart Switch
Usage
Lighting

Usage

Lighting

For remote control of lamps and lighting fixtures.

Smart Attributes

Connectivity
RF, ZigBee

Connectivity

RF

Wireless control via radio frequencies.

ZigBee

Special connectivity network for smart devices that offers high stability and energy savings.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
1.36 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Pieces
1

Features

Dimmer
Yes

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

38,91 €
14,00 €   shipping cost