Skroutz.mt

Safewell Wired Beam Sensor Four Beams IP65 Scope 10m
Beam Sensors

Safewell Wired Beam Sensor Four Beams IP65 Scope 10m

IR Beam Sensor for doors or windows with the following features:

  • 4 beams, 4 infrared transmission channels with selection to prevent interference from adjacent beams in an installation.
  • Height 75 cm....

IR Beam Sensor for doors or windows with the following features:

  • 4 beams, 4 infrared transmission channels with selection to prevent interference from adjacent beams in an installation.
  • Height 75 cm.
  • IP65 special coating on the circuit board for greater resistance to harsh conditions.
  • NC/NO contact activates when at least 2 beams are interrupted.
  • Maximum...
See full description See full description

  • Login

    Wired

    It connects to the installation system with a cable and is powered through it.

  • Number of Beams

    The number of beams indicates the quantity of infrared rays connecting the transmitter to the receiver. More beams mean greater coverage height and fewer false alarms, as all beams must be interrupted simultaneously to trigger the system.

  • Range

    The range indicates the maximum distance (in meters) that the transmitter can be from the receiver in order to operate reliably.

  • Length

    Usually, the greater the length, the more beams there are in the device, and therefore the greater the coverage length of the detector.

  • Number of Channels

    The number of channels indicates the different frequencies that the detector can use. It allows the installation of multiple pairs in the same area without interference between them, ensuring that each receiver "listens" only to its own transmitter.

  • Protection Certification

    IP65

    Suitable for outdoor areas with heavy rain or pressurized water. Provides complete protection against dust and object intrusion, ideal for gardens or industrial spaces.
  • See all
Review the product
Product report

Description

Description

IR Beam Sensor for doors or windows with the following features:

  • 4 beams, 4 infrared transmission channels with selection to prevent interference from adjacent beams in an installation.
  • Height 75 cm.
  • IP65 special coating on the circuit board for greater resistance to harsh conditions.
  • NC/NO contact activates when at least 2 beams are interrupted.
  • Maximum range 10 m.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Connector
Wired

Connector

Wired
It connects to the installation system with a cable and is powered through it.
Scope
10 m

Scope

The range indicates the maximum distance (in meters) that the transmitter can be from the receiver in order to operate reliably.
Number of Beams
4 Bundles

Number of Beams

The number of beams indicates the quantity of infrared rays connecting the transmitter to the receiver. More beams mean greater coverage height and fewer false alarms, as all beams must be interrupted simultaneously to trigger the system.
Number of Channels
4

Number of Channels

The number of channels indicates the different frequencies that the detector can use. It allows the installation of multiple pairs in the same area without interference between them, ensuring that each receiver "listens" only to its own transmitter.
Protection Certification
IP65

Protection Certification

IP65
Suitable for outdoor areas with heavy rain or pressurized water. Provides complete protection against dust and object intrusion, ideal for gardens or industrial spaces.
Length
75 cm

Length

Usually, the greater the length, the more beams there are in the device, and therefore the greater the coverage length of the detector.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

IR Beam Sensor for doors or windows with the following features:

  • 4 beams, 4 infrared transmission channels with selection to prevent interference from adjacent beams in an installation.
  • Height 75 cm.
  • IP65 special coating on the circuit board for greater resistance to harsh conditions.
  • NC/NO contact activates when at least 2 beams are interrupted.
  • Maximum range 10 m.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Connector
Wired

Connector

Wired
It connects to the installation system with a cable and is powered through it.
Scope
10 m

Scope

The range indicates the maximum distance (in meters) that the transmitter can be from the receiver in order to operate reliably.
Number of Beams
4 Bundles

Number of Beams

The number of beams indicates the quantity of infrared rays connecting the transmitter to the receiver. More beams mean greater coverage height and fewer false alarms, as all beams must be interrupted simultaneously to trigger the system.
Number of Channels
4

Number of Channels

The number of channels indicates the different frequencies that the detector can use. It allows the installation of multiple pairs in the same area without interference between them, ensuring that each receiver "listens" only to its own transmitter.
Protection Certification
IP65

Protection Certification

IP65
Suitable for outdoor areas with heavy rain or pressurized water. Provides complete protection against dust and object intrusion, ideal for gardens or industrial spaces.
Length
75 cm

Length

Usually, the greater the length, the more beams there are in the device, and therefore the greater the coverage length of the detector.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

43,00 €
14,00 €   shipping cost