Skroutz.mt

Pool Water Pump Filter Single-Phase with Power 1.5hp and Maximum Water Supply 20000 lt/h
Pool Water Pumps

Pool Water Pump Filter Single-Phase with Power 1.5hp and Maximum Water Supply 20000 lt/h

Pool recirculation pump

  • Max water temperature: 50C
  • Max pressure: 1.8 bar
  • Motor: Class F, IP55, 50Hz
  • Operating speed: 1,100-3,100 r.p.m.
  • Motor shaft: inox 316
  • Mechanical seal: inox 316
  • Pump body:...

Pool recirculation pump

  • Max water temperature: 50C
  • Max pressure: 1.8 bar
  • Motor: Class F, IP55, 50Hz
  • Operating speed: 1,100-3,100 r.p.m.
  • Motor shaft: inox 316
  • Mechanical seal: inox 316
  • Pump body: Noryl
  • Pump pre-filter: Noryl
  • Impeller: Noryl
  • Cover-fitting: PP-PVC
  • Connection: 1.5" or 2
See full description See full description
  • Item Filter

  • Power

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
  • Pool Size Standard Domestic (50 to 90 m³)

  • Power Supply

    Single-Phase

    Operates with standard household electricity (230V). It is suitable for residential pools.

  • Flow rate (max)

    Shows how many liters of water the pump can deliver in 1 hour.

  • Connection Nozzle

    Indicates the diameter of the pipe that can be connected to the pump.

    • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
    • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

    Tip: Check the diameter of your existing pipes before making a selection.
  • See all
Review the product
Product report

Description

Description

Pool recirculation pump

  • Max water temperature: 50C
  • Max pressure: 1.8 bar
  • Motor: Class F, IP55, 50Hz
  • Operating speed: 1,100-3,100 r.p.m.
  • Motor shaft: inox 316
  • Mechanical seal: inox 316
  • Pump body: Noryl
  • Pump pre-filter: Noryl
  • Impeller: Noryl
  • Cover-fitting: PP-PVC
  • Connection: 1.5" or 2

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Type
Filter
Power (hp)
1.5 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
Yes

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Standard Domestic (50 to 90 m³)
Filter Included
No

Performance

Maximum Supply
20000 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.

Installation

Connection Nozzle
50 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Pool recirculation pump

  • Max water temperature: 50C
  • Max pressure: 1.8 bar
  • Motor: Class F, IP55, 50Hz
  • Operating speed: 1,100-3,100 r.p.m.
  • Motor shaft: inox 316
  • Mechanical seal: inox 316
  • Pump body: Noryl
  • Pump pre-filter: Noryl
  • Impeller: Noryl
  • Cover-fitting: PP-PVC
  • Connection: 1.5" or 2

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information

Main Specifications

Type
Filter
Power (hp)
1.5 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
Yes

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Standard Domestic (50 to 90 m³)
Filter Included
No

Performance

Maximum Supply
20000 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.

Installation

Connection Nozzle
50 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

301,32 €
23,00 €   shipping cost