Skroutz.mt

Awtools Dirty Water Pump with Float Switch 1100W Q1dp
Submersible Water Pumps

Awtools Dirty Water Pump with Float Switch 1100W Q1dp

The housing is made of impact-resistant plastic. It features a float switch for automatic activation and deactivation of the pump. Includes a thermal switch that protects the pump from overheating and...

The housing is made of impact-resistant plastic. It features a float switch for automatic activation and deactivation of the pump. Includes a thermal switch that protects the pump from overheating and overload. The hose connection has a universal adapter, allowing connection to hoses of different diameters. It has an ergonomic handle for comfortable...

See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    10

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
Review the product
Product report

Description

Description

The housing is made of impact-resistant plastic. It features a float switch for automatic activation and deactivation of the pump. Includes a thermal switch that protects the pump from overheating and overload. The hose connection has a universal adapter, allowing connection to hoses of different diameters. It has an ergonomic handle for comfortable transport. Ideal for pumping, transferring, and draining dirty water and sewage. It is also suitable for water replacement in pools, pumping rainwater, and draining water from wells, shafts, reservoirs, construction excavations, or flooded rooms.

  • Power: 1100W
  • Power supply: 220 V/50 Hz
  • Flow rate: 15,000l/h
  • Maximum submersion depth: 7m
  • Maximum lifting height: 10m
  • Maximum liquid temperature: 35°C
  • Maximum pressure: 0.8 Bar
  • Cable length: 10m
  • Maximum particle size: 35mm
  • Connection: Cone from 25mm to 35mm
  • Weight: 5.9kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Rainwater
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
7 m

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
10 m

Maximum Head Height: 10


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The housing is made of impact-resistant plastic. It features a float switch for automatic activation and deactivation of the pump. Includes a thermal switch that protects the pump from overheating and overload. The hose connection has a universal adapter, allowing connection to hoses of different diameters. It has an ergonomic handle for comfortable transport. Ideal for pumping, transferring, and draining dirty water and sewage. It is also suitable for water replacement in pools, pumping rainwater, and draining water from wells, shafts, reservoirs, construction excavations, or flooded rooms.

  • Power: 1100W
  • Power supply: 220 V/50 Hz
  • Flow rate: 15,000l/h
  • Maximum submersion depth: 7m
  • Maximum lifting height: 10m
  • Maximum liquid temperature: 35°C
  • Maximum pressure: 0.8 Bar
  • Cable length: 10m
  • Maximum particle size: 35mm
  • Connection: Cone from 25mm to 35mm
  • Weight: 5.9kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Rainwater
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
7 m

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
10 m

Maximum Head Height: 10


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

79,31 €
23,00 €   shipping cost