Skroutz.mt

Buffer Power Supply SMPS 24V 3A 72W Atte Aups-70-240
Misc Electronics

Buffer Power Supply SMPS 24V 3A 72W Atte Aups-70-240

The ATTE AUPS-70-240 power supply is a standby SMPS model for CCTV devices and access control systems. It supports two identical 12 V gel or AGM batteries with a capacity of 7–18 Ah, connected in...

The ATTE AUPS-70-240 power supply is a standby SMPS model for CCTV devices and access control systems. It supports two identical 12 V gel or AGM batteries with a capacity of 7–18 Ah, connected in series. The Open Frame design is intended for installation in an enclosure, such as those in the ABOX series.

Battery charging is set to 1 A or 2 A via jumper JP1....

See Description & Specifications See Description & Specifications

Learn more about invoicing
Review the product
Product report

Description & Specifications

The ATTE AUPS-70-240 power supply is a standby SMPS model for CCTV devices and access control systems. It supports two identical 12 V gel or AGM batteries with a capacity of 7–18 Ah, connected in series. The Open Frame design is intended for installation in an enclosure, such as those in the ABOX series.

Battery charging is set to 1 A or 2 A via jumper JP1. LEDs LED1, LED2 and LED3 indicate the mains voltage, output voltage and battery charging status, respectively. The OUF and ACF open-collector outputs have a maximum load of 50 mA per output, and the power supply starts automatically after the battery is connected.

  • Type: Standby SMPS power supply
  • Output voltage: 24 VDC ±15%
  • Output current: 3 A
  • Power: 72 W
  • Efficiency: 90% at 70 W
  • Input voltage: 190–260 VAC
  • Input frequency: 50 Hz
  • Charging current: 1 A or 2 A
  • Supported batteries: 2 identical gel or AGM batteries, each 12 V and 7–18 Ah, connected in series
  • Input protection: 3.15 A time-delay fuse
  • Output protection: Electronic overload protection at 5 A, requiring a restart
  • Battery operation protection: 3.15 A fuse
  • Battery protection: Against reverse connection, overload and deep discharge
  • Battery disconnection: Below 20.4 V, with automatic recovery
  • LED indicators: Yellow LED1 for mains voltage, green LED2 for output voltage and red LED3 for battery charging
  • Technical outputs: OUF and ACF open-collector outputs, maximum load of 50 mA per output
  • Operating temperature: -10 to +40 °C
  • Mounting: With snap-in spacers and holes on a 10.8 mm grid
  • Dimensions: 65 × 118 × 45 mm
  • Weight: 0.14 kg
  • Packaging: 1 piece

Manufacturer

Manufacturer Details

Warnings & Safety Information
Type
Power supply
Packaging
1 pcs
Operating Voltage
24 V
Ecosystem
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

83,90 €
14,00 €   shipping cost