Sunlu Silk PLA+ 3D printer filament has a silky, glossy finish that gives prints an iridescent appearance, with two colors alternating along the model and changing with the light. It is suitable for artistic and decorative creations, and its finish requires no additional polishing after printing.

The filament feeds smoothly and has low warping and shrinkage for consistent printing and uniform results. It does not require a heated bed and is compatible with most FDM 3D printers.

• Material: PLA+
• Color: Pink
• Diameter: 1.75 mm
• Diameter accuracy: ±0.02 mm
• Weight: 1 kg
• Packaging: Spool
• Quantity: 1 piece
• Finish: Silky and glossy
• Heated bed: Not required
• Compatibility: Most FDM 3D printers, including Bambu Lab, Creality, Prusa, and Anycubic
• Density: 1.25 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature: 53 °C
• Melting temperature: 164 °C
• Melt flow rate: 9 g/10 min
• Tensile strength: 60.6 MPa
• Elongation at break: 6.3%
• Flexural strength: 65 MPa
• Elastic modulus: 2760 MPa
• Impact strength: 4.2 kJ/m²